Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Community Forums > Lounge


Thread Tools
Old 08-03-2018, 08:07 AM   #1
Arikalimanis's Avatar
Join Date: Aug 2016
Location: Hamilton nj
Posts: 20
iTrader: (0)
Fuel pump on new build , carb conversion ext HELPPPPP

Hey guys so i have so many questions it might even be hard to start this off , anyway long story short i bought a 85 iroc which was a 305 with a holley carb and a moroso hei distributor . Now before i swapped it for a 350 .060 over it would start and run fine with the exeption on some mechanical problems . So i swapped the motor i reused what ever i could from the old 305 like holley carb edelbrock intake hei distributor and some other stuff ,so when i first went to go start the car i wasnt getting fuel pump prime i tracked down the relay replaced theconnector and relay so now i have fuel pump prime when i turn the key but zero fuel pressure after i try and crank it , side note i got the engine running by filling the carb and when it uses up w.e it primed it shuts off . I have a spagetti of a mess on in the engine bay with wiring and im just lost now what could be the issue ? Bad ground ? Bad pump ? Oil pressure switch (which i dont have only a mechanical on top by distributor) regulator ?(which worked fine 2 months ago im lost please help
Arikalimanis is offline   Reply With Quote

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Community Forums > Lounge

carb convertion, fuel pump, fuel pump relay, new build

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List

All times are GMT -5. The time now is 01:26 PM.

Powered by vBulletin® Version 3.8.9 Beta 3
Copyright ©2000 - 2019, vBulletin Solutions, Inc.