|
|
10-23-2010, 06:39 PM
|
#1
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
ticking sound
ok so i did quite a bit of research and so far what i've been reading says it could be but not limited to:
faulty O ring for the oil pump
bent/broken push rod
loose rocker
loose header bolt
loose plug/plugwire
low oil
now maybe this could pin point it. i dont really hear it at idle. or when cruising, i hear it when the rpms go up when its going to shift. def sounds like the passenger side. does this specifically fit anyone of those or something else?
|
|
|
10-23-2010, 06:55 PM
|
#2
|
What?
Join Date: Nov 2009
Posts: 411
|
immmmmm lets hear it........
Quote:
Originally Posted by WiMiMc
ok so i did quite a bit of research and so far what i've been reading says it could be but not limited to:
faulty O ring for the oil pump
bent/broken push rod
loose rocker
loose header bolt
loose plug/plugwire
low oil
now maybe this could pin point it. i dont really hear it at idle. or when cruising, i hear it when the rpms go up when its going to shift. def sounds like the passenger side. does this specifically fit anyone of those or something else?
|
sounds like a '''lifter to me????
__________________
YELLOW BULLET,WHER THE ''WEAK ARE EATEN''
STOP THE ''BITCH IN, BAAAAD
BOOTS TO ASSSES, IF U CAN SMELLLLLLLLLLLLL,WHAT THUNDER IS-SPAYYYY-IN.. .. RIP, MIKE ROMEO..TUNE,BY DALE CHERRY,INJECTION-CONNECTION..""SHAZAMMMM""
THE FAMOUS ONE215-675-8515 ,AND STEVE SPOHN,and j&g-transmisstions,willow grove,pa,215-659-3022,, R.I.P.JOE PRINCE..
|
|
|
10-23-2010, 07:12 PM
|
#3
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
i was just going to edit and put that possibility haha
damn, i had this happen to my 305, how different would it be to do on an ls1?
Last edited by WiMiMc; 10-23-2010 at 07:13 PM.
|
|
|
10-23-2010, 07:22 PM
|
#4
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
anything happen before the noise started? mis-shift, oil change, etc...
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
10-23-2010, 07:28 PM
|
#5
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
noo its an automatic and i've been driving it the same as i always have been, easy with the exception of merging onto highways in a spirited manner. and i'm actually due for an oil change
|
|
|
10-23-2010, 07:39 PM
|
#6
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
Header/Y tapping the floorboard from a worn motor mount?
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
10-23-2010, 07:41 PM
|
#7
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
Quote:
Originally Posted by NJ Torque
Header/Y tapping the floorboard from a worn motor mount?
|
hmm i suppose i could jack it up tomorrow and look at it. i'm going to try to do the least labor intensive things first. i've learned my lesson from doing unneeded work
|
|
|
10-23-2010, 09:18 PM
|
#8
|
Join Date: Nov 2008
Posts: 112
|
Loose plug wire or coil pack arcing to the valva cover or the head.
__________________
|
|
|
10-24-2010, 05:08 AM
|
#9
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
Quote:
Originally Posted by Jensend
Loose plug wire or coil pack arcing to the valva cover or the head.
|
idek how i'm going to check the one in the back with the egr tube,crush tubing, and a/c. how would i?
something i have to go up from the bottom for?
|
|
|
10-24-2010, 10:52 AM
|
#10
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
Does it sound like it's coming from the engine compartment or possibly under the car like an exhaust leak? Check around the catalytic converter on the passenger side, it might be leaking where the y-pipe goes into the cat. Also check the AIR connection to the header to see if a bolt or nut loosened up. Also check the header where the AIR fitting and EGR fitting is welded to see if the welds might be leaking. It also might be worth doing the oil change to see if it goes away. The rear passenger side spark plug and wire are a PITA to get to. I think I ended up removing the AIR fittings and pulling a coil or 2 to be able to reach back to the last plug/wire.
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
|
|
|
10-24-2010, 10:56 AM
|
#11
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
ah okay i'll try all of that now and report back
|
|
|
10-24-2010, 11:44 AM
|
#12
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
ok possibly the culprit? the gasket on the passenger side, air? i'm not sure it comes out of the top of the header
i need to get oil anyways so i'll run to the store and pick up another one
|
|
|
10-24-2010, 11:52 AM
|
#13
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Post a vid clip if you can. Are you sure its coming from the passenger side?
It could be a small exhaust leak or even a spark plug slightly backed out.
A bad lifter is very loud and distinguishable and that doesnt sound like your problem.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
10-24-2010, 02:51 PM
|
#14
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
Last edited by WiMiMc; 10-24-2010 at 02:56 PM.
|
|
|
10-24-2010, 03:14 PM
|
#15
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
When did this start to happen, and was it all of a sudden? Have you checked the plugs and wires to make sure everything is tight and seated?
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
10-24-2010, 03:34 PM
|
#16
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
it started maybe thursday, and yeah all of a sudden, at first i thought it was the trans bc of when i'd hear it, but now i'm sure it isnt. i havent checked all off the plugs/wires, i'm waiting till it cools off more before i try to get at that back one
|
|
|
10-24-2010, 03:55 PM
|
#17
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Does the ticking ONLY come on with higher rpm, or is it still there at idle? Have you ruled out the possibility of the air gasket leaking?
Pull the wires and reach back and check to make sure the plugs are seated tight. let us know how that goes so we can start to rule some things out.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
10-24-2010, 04:21 PM
|
#18
|
What?
Join Date: Nov 2009
Posts: 411
|
immmmmmmmmmmmmmmm
are all the ''wires'' in ther right spot???????????
__________________
YELLOW BULLET,WHER THE ''WEAK ARE EATEN''
STOP THE ''BITCH IN, BAAAAD
BOOTS TO ASSSES, IF U CAN SMELLLLLLLLLLLLL,WHAT THUNDER IS-SPAYYYY-IN.. .. RIP, MIKE ROMEO..TUNE,BY DALE CHERRY,INJECTION-CONNECTION..""SHAZAMMMM""
THE FAMOUS ONE215-675-8515 ,AND STEVE SPOHN,and j&g-transmisstions,willow grove,pa,215-659-3022,, R.I.P.JOE PRINCE..
|
|
|
10-24-2010, 05:09 PM
|
#19
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
its only noticeable at high rpms, when standing by it idling i cant even hear it
the wires are in their right spots, the only spark plug i was unable to get to was that blasted back one >.<
i was going to take off the valve cover and see if i could see anything there, but its getting dark now and i'm still getting accustomed to the cramped working space
|
|
|
10-24-2010, 05:23 PM
|
#20
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
Rule out exhaust leaks before getting under the valve covers.
When I had an ls1 lifter go bad, I could hear it at idle. The ticking got progressively worse over about a week of daily driving, and it was very loud. Like you coul hear the car from down the street. Hopefully that doesnt happen to you.
If you can get a buddy help, unbolt the valve cover then hook the coil packs back up. have your friend hold the packs above the rockers and start up the engine and give it a little rev to see if the noise is louder/coming from the rockers. Dont do it too long though because you'll shoot oil everywhere.
If you cant determine if its a bad rocker, time to pull them off. Check the needle bearings on the rockers, and pull the pushrods. Roll the pushrods over a mirror to check for bends.
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
10-24-2010, 07:08 PM
|
#21
|
Hippy Mod, Bergermeister Meisterberger, Moderator
Join Date: Aug 2004
Location: Ewing
Posts: 6,213
|
Wow, that sounded really strange. It could be the AIR tube gasket where it connects to the header, it could be the AIR check valve going bad or the AIR hose is loose or cracked. It really sounds exhaust related like the AIR or EGR. I've had the AIR check valves go bad on a couple of 4th gens and it basically lets the exhaust go back through to the AIR pump. I would check the exhaust stuff before taking too much time with the plugs/wires or rockers.
Also check the pcv hose where it connects to the throttle body to make sure none of the hose is cracked.
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
Last edited by JL8Jeff; 10-24-2010 at 07:11 PM.
|
|
|
10-24-2010, 07:12 PM
|
#22
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
I agree that seems weird. Might be time for the good old listen through a piece of heater hose trick to pinpoint the noise.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
11-02-2010, 06:05 PM
|
#23
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
i'm busy with school so i havent been able to spend a lot of time on it. though the other day i listened around to see if anything on the exhaust is loose under the car, and there isnt. i did the screwdriver hearing test and it is not coming from under the valve cover.
|
|
|
11-02-2010, 06:28 PM
|
#24
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
what filter are you running? could be the legendary fram filter ticker
|
|
|
11-02-2010, 07:51 PM
|
#25
|
Join Date: Jul 2010
Location: Somerset,NJ
Posts: 585
|
its a mobil 1
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|