Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > Wanted To Buy - Automotive

Notices


Closed Thread
 
Thread Tools
Old 07-17-2020, 09:49 PM   #1
TaKid455
 
Join Date: Oct 2008
Posts: 586
iTrader: (1)
WTB LS2 6.0 Al block/ engine

Throwing the net out and seeing if anyone has an LS2 block. LS1 & 3 also considered. Ultimately looking to go the 408 or 416 route.
PM or reply
TaKid455 is offline  
Old 07-17-2020, 11:39 PM   #2
Sprayed 99
 
Join Date: Jul 2009
Location: Hammonton,NJ
Posts: 229
iTrader: (1)
I have a LS2 block fully machined ready to go. 4.015 bore and block is half filled
__________________
99 TA M6
Sprayed 99 is offline  
Old 07-19-2020, 08:45 AM   #3
TaKid455
 
Join Date: Oct 2008
Posts: 586
iTrader: (1)
I'll keep in mind. Being this will be a street car, I rather full cooling capacity. Yes, I know it can be done and has been done. Oil temps would be the concern more so over coolant. Was the machine work done before or after the filling?

What are you looking to get for your block?
TaKid455 is offline  
Old 07-20-2020, 07:22 AM   #4
MyFirstZ
 
MyFirstZ's Avatar
 
Join Date: May 2009
Location: Highland Mills, NY
Posts: 1,915
iTrader: (8)
Social Networks:

Have an LS2 at 4.185" bore with darton sleeves, a little bigger then what you planned.

Got wiseco pistons and callies compstart 4" rods that go with it. Will need a crank.

This is from my 440ci
__________________
2000 Camaro SS
610rwhp/570rwtq
LS2 440, 12 bolt 3.73, tranzilla t56
MyFirstZ is offline  
Old 07-20-2020, 08:38 AM   #5
TaKid455
 
Join Date: Oct 2008
Posts: 586
iTrader: (1)
That is just a hair bigger displacement. Any meat left on those sleeves at that bore dia? Say it get redone down the road, can you safely go 20 or 30 over?

Any filler in the block? Decked? Main studs?

What heads did you run?
TaKid455 is offline  
Old 07-20-2020, 12:54 PM   #6
MyFirstZ
 
MyFirstZ's Avatar
 
Join Date: May 2009
Location: Highland Mills, NY
Posts: 1,915
iTrader: (8)
Social Networks:

I'll do some research as far as refinishing.
If I could remember how to get pictures on here I'd send em, but it looks like there is plenty of room to go

I had trickflow 245 cathedral port by tea on them

I have the info on the deck height, yes arp main studs are installed and no filler

It was in a street car, spun a main. Sent it to the machinist and when he checked the crank he found a hairline cracked so I parted te car out. Had him do the line hone and new cam bearings.

Still have to go pick it up
__________________
2000 Camaro SS
610rwhp/570rwtq
LS2 440, 12 bolt 3.73, tranzilla t56
MyFirstZ is offline  
Old 07-22-2020, 09:33 AM   #7
Sprayed 99
 
Join Date: Jul 2009
Location: Hammonton,NJ
Posts: 229
iTrader: (1)
Quote:
Originally Posted by TaKid455 View Post
I'll keep in mind. Being this will be a street car, I rather full cooling capacity. Yes, I know it can be done and has been done. Oil temps would be the concern more so over coolant. Was the machine work done before or after the filling?

What are you looking to get for your block?
I ran this block on the street for a couple years with a oil cooler and never had a single issue with oil temperature. I even drove the car fom NJ to Ocean City Maryland and back. I put another LS2 together and had that filled block machined and done to do a turbo build. I'LL even throw in the electric oil temp guage too.

It was filled first then machined afterwards. Bored, honed, line bored, new cam bearings and deck cleaned up. It's literally ready to assemble just throw in your parts
__________________
99 TA M6

Last edited by Sprayed 99; 07-22-2020 at 09:41 AM.
Sprayed 99 is offline  
Old 07-22-2020, 09:39 AM   #8
Sprayed 99
 
Join Date: Jul 2009
Location: Hammonton,NJ
Posts: 229
iTrader: (1)
Pm sent
__________________
99 TA M6
Sprayed 99 is offline  
Closed Thread

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > Wanted To Buy - Automotive

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 03:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.