98-02 Camaro Parts (lots of convertible specific stuff)

[4thGenJunkie]

Light Grey Visors (not lighted very good condition) - $100
Radio Bezel - $50
Steering Column (wheel itself is useless) - $150
Rear Interior Panels (convertible only) - $120 for both sides
Convertible Top Pump w/Lines - $150
Convertible Top With Frame and Heated Rear Window (black) - $700
Tonneau Cover w/Carrying Case (plastics that go over top when its down) - $400
Stock z28 Hood (Silver one scratch towards front) - $100
Passenger Side Door w/Window (silver, believe I also have door harness separately) - $200
Interior Door Panels (dark grey cloth can use a cleaning but in very good condition) - $200 for both
Auto Upper Console - $50
Passenger Door Switches - $40
A/C and Heater Controls - $40
Heater Box - $100
LS1 PCM (has a tune from CarTek on it) - $150
Convertible Trunk Hinges w/Shocks+hardware - $75
Stock Torque Converter - $75
Stock 4 channel axles - $100 for the pair
Stock throttle body - $100
Auto Shifter Assembly - $50 w/o knob $75 w/knob
Rear View Mirror w/Map Light - $20
Cooling Fan Assembly - $80
Washer Fluid Tank - $40
Air Box (upper/lower) - $100
MAF - $50
SLP Dual Slash Cut Tips - $60


No engine or trans. Pictures in link--> http://cnj.craigslist.org/pts/4663778559.html

I have lots of other parts also so please don't hesitate to ask if I have something your looking for. All parts are from a silver 98 Z28 convertible (so i have lots of the harder to find convertible specific stuff). I really have to get most of this sold so I'm somewhat flexible with some of the prices. Feel free to contact me at any time you'll probably be better off texting me 908-930-0616 Dave

[NJ Torque]

Looking for the latch ass'm for both side (what the roof latchs lock into)

[TaKid455]

ABS Module w/ TCS.
Center dash vents (3 vents in a row)
Ash tray cover in ebony

[4thGenJunkie]

Originally Posted by TaKid455

ABS Module w/ TCS.
Center dash vents (3 vents in a row)
Ash tray cover in ebony

Dash vents are completely different in a T/A, Ill dig through my garage tomorrow to look for the other pieces.

[Troy]

Got a dash pad?

[4thGenJunkie]

Originally Posted by Troy

Got a dash pad?

whole dash and pad are gone sorry

[Blackbirdws6]

Have a steering shaft available?

[4thGenJunkie]

Originally Posted by Blackbirdws6

Have a steering shaft available?

Yea I have one you'll just have to remove the steering wheel everything else on it is good though stalks and all.

[Blackbirdws6]

I do not need the column. I just need the piece from inside the engine bay which connects to the steering rack and steering column. Two bolts and it comes out. Let me know.

Edit: this piece (disregard the arrow, I need this whole thing)

[4thGenJunkie]

Originally Posted by Blackbirdws6

I do not need the column. I just need the piece from inside the engine bay which connects to the steering rack and steering column. Two bolts and it comes out. Let me know.

Edit: this piece (disregard the arrow, I need this whole thing)

So far no shaft

[mab6680]

do you have an express down module

[4thGenJunkie]

Originally Posted by mab6680

do you have an express down module

yep pm'd you about it

[4thGenJunkie]

Somebody buy this stuff!!!!!!!!!!!!!!!!!!!