Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > For Sale - Automotive Parts

Notices


Closed Thread
 
Thread Tools
Old 09-06-2008, 03:09 PM   #1
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
Parting: teal '92 RS and aftermarket parts

I have a teal '92 RS 305 TBI parts car in my garage that needs to go. Pickup preferred! Will sell stuff cheap! If you think any of my prices are too high, just make an offer. This car has to go.

1992 Camaro RS
t-top body
305 TBI motor w/rod knock (probably a clogged oil pickup)
700R4 trans
teal exterior, gray interior

Stock parts!
  • Lexan t-tops with vinyl bag in excellent shape $150!
  • NEW rear headliner trim piece in black (NOS from GM) $25! SOLD
  • refinished auto shifter with leather shift knob $20!
  • leather ebrake cover $10! SOLD
  • 3-piece spoiler $25!
  • rear hatch, glass & lift supports $50!
  • 2 sets of grid taillights $35 each! One set left!
  • rear bumper cover and ground effect $50!
  • stock hood, needs paint $25!
  • complete dash and cluster SOLD
  • rearview mirror with map lights $30!
  • doors SOLD
  • front and rear seats SOLD
  • auto shifter surround SOLD
  • fenders SOLD
  • front bumper SOLD
  • sideskirts SOLD
  • rear hatch pulldown motor SOLD
  • hatch carpet SOLD
  • hood latch and hinges SOLD
  • steering column and steering wheel SOLD
  • NEW heater core $25!
  • NEW water pump $20!
Aftermarket parts!
  • NEW black Spohn front swaybar with Prothane endlinks & bushings $100! SOLD
  • NEW black Spohn rear 1" swaybar with Prothane endlinks & bushings $100! SOLD
  • NEW KYB GR-2 front struts & Gas-a-Just rear shocks $150! SOLD
  • NEW upper strut mounts with Spohn retainers $100!
  • NEW Earl's Hyperfirm brake hoses for 84-92 Camaro disks/drums $50!
  • Spohn black steering box brace (wonderbar) $40!
  • Spohn steering kit (Moog tie rod ends, center link, idler arm and Spohn tie rod adjusters) $100 + your steering parts! SOLD
  • rebuilt a-arms all NEW: Moog ball joints, Moog bump stops, Prothane bushings $100 + your a-arms! SOLD
  • Eibach Pro-Kit front and rear springs $125 SOLD
  • Eibach Sportline front and rear springs $125
  • L69 dual snorkel intake (missing the one scoop) $100!
  • aluminum driveshaft $75! SOLD
  • Polk Audio db460 4x6 2-way speakers, pair $25!
There's probably a lot more that I'm missing. I'll post them as I find them.

Last edited by CaysE; 10-21-2008 at 08:21 AM. Reason: more parts!
CaysE is offline  
Old 09-06-2008, 03:47 PM   #2
Teds89IROC
 
Teds89IROC's Avatar
 
Join Date: Sep 2004
Location: Haledon, NJ
Posts: 5,162
iTrader: (0)
might be interested in the driveshaft and tail lights
__________________
1989 IROC-Z 355 LT1 T56 Swapped
2016 Chevy Colorado LT 3.6 v6
2008 Jeep Grand Cherokee Laredo 4.7L RIP 12/29/2016
1998 Honda CBR 600F3
2003 Yamaha FX140
Teds89IROC is offline  
Old 09-06-2008, 03:48 PM   #3
Fast92RS
Power Member
 
Fast92RS's Avatar
 
Join Date: Jul 2006
Location: Old Bridge, NJ
Posts: 2,415
iTrader: (13)
PM sent
__________________
2013 Camaro ZL1
https://kraeserepairs.com
Fast92RS is offline  
Old 09-06-2008, 03:56 PM   #4
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
Quote:
Originally Posted by Teds89IROC View Post
might be interested in the driveshaft and tail lights
Well then buy them. LOL

Quote:
Originally Posted by Fast92RS View Post
PM sent
replied
CaysE is offline  
Old 09-06-2008, 03:59 PM   #5
Teds89IROC
 
Teds89IROC's Avatar
 
Join Date: Sep 2004
Location: Haledon, NJ
Posts: 5,162
iTrader: (0)
ok, I'll def. take the driveshaft lol. One more thing, I need a power hatch motor, you have that still?
__________________
1989 IROC-Z 355 LT1 T56 Swapped
2016 Chevy Colorado LT 3.6 v6
2008 Jeep Grand Cherokee Laredo 4.7L RIP 12/29/2016
1998 Honda CBR 600F3
2003 Yamaha FX140
Teds89IROC is offline  
Old 09-06-2008, 04:18 PM   #6
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
Yeah that's still on the car; I can make it $100 even for both. The aluminum shaft is already out.
CaysE is offline  
Old 09-06-2008, 06:50 PM   #7
chrisfrom nj
 
chrisfrom nj's Avatar
 
Join Date: Feb 2005
Location: west orange nj
Posts: 2,415
iTrader: (8)
what kind of rear do you have is it a posi
chrisfrom nj is offline  
Old 09-06-2008, 11:57 PM   #8
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
I don't think any RS came with posi.
CaysE is offline  
Old 09-07-2008, 12:49 AM   #9
NJSPEEDER
NJFBOA Co-Founder
 
NJSPEEDER's Avatar
 
Join Date: Jul 2004
Location: All up in your kool aid!
Posts: 12,235
iTrader: (10)
There were a few ways to option an RS so that it came with a posi rear, but they are rare and you would know the car was that special based on other options. With an automatic the car was most likely a 2.73 peg leg.
__________________
Tim - NJSPEEDER
Currently F-bodyless

New Jersey F-Body Owners Association
NJSPEEDER is offline  
Old 09-07-2008, 01:40 AM   #10
madness410
 
madness410's Avatar
 
Join Date: Mar 2008
Location: Somerset, NJ
Posts: 4,223
iTrader: (5)
pm sent
__________________
Jon
1999 Trans am WS6
1996 Corvette LT4 6 speed
madness410 is offline  
Old 09-07-2008, 09:53 AM   #11
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
Quote:
Originally Posted by NJSPEEDER View Post
There were a few ways to option an RS so that it came with a posi rear, but they are rare and you would know the car was that special based on other options. With an automatic the car was most likely a 2.73 peg leg.
That's interesting to learn... I'm guessing it at least needed to be manual?
CaysE is offline  
Old 09-07-2008, 10:56 PM   #12
Rich2279
 
Rich2279's Avatar
 
Join Date: Feb 2008
Location: Williamstown, NJ
Posts: 191
iTrader: (2)
Let me know if the instrument cluster becomes available.
__________________

1998 Mustang GT
1992 Mustang LX


Rich2279 is offline  
Old 09-09-2008, 06:07 PM   #13
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
Will do, Rich, but it looks like it's taken at the moment. I'll keep you in mind if it falls through.

All PMs replied to.

I also have a nice dual 10" sub box with Infinity subs for the hatch well; custom fit: http://www.njfboa.org/forums/showthread.php?t=36677
CaysE is offline  
Old 09-12-2008, 08:58 PM   #14
chevylover5
 
chevylover5's Avatar
 
Join Date: Jan 2007
Location: Willlow Grove, PA
Posts: 142
iTrader: (1)
still have the drive shaft? is it third or fourth gen?

what shape are the grid tails in?
thanks
-Ken
__________________
chevylover5 is offline  
Old 09-14-2008, 11:23 AM   #15
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
Sorry, the driveshaft was sold yesterday. Both sets of taillights are in good shape.

PMs finally replied to... I've been away for a couple days.
CaysE is offline  
Old 09-20-2008, 11:06 AM   #16
Fast92RS
Power Member
 
Fast92RS's Avatar
 
Join Date: Jul 2006
Location: Old Bridge, NJ
Posts: 2,415
iTrader: (13)
Thanks again great buy
__________________
2013 Camaro ZL1
https://kraeserepairs.com
Fast92RS is offline  
Old 09-25-2008, 10:11 AM   #17
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
Updated and PMs replied.
CaysE is offline  
Old 09-25-2008, 05:46 PM   #18
chrisfrom nj
 
chrisfrom nj's Avatar
 
Join Date: Feb 2005
Location: west orange nj
Posts: 2,415
iTrader: (8)
do you have the rear bumper support
chrisfrom nj is offline  
Old 09-25-2008, 10:33 PM   #19
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
I do still have the crash piece for the rear, if Fast92RS doesn't want it.
CaysE is offline  
Old 09-26-2008, 06:26 AM   #20
chrisfrom nj
 
chrisfrom nj's Avatar
 
Join Date: Feb 2005
Location: west orange nj
Posts: 2,415
iTrader: (8)
cayse are you going to be around today
chrisfrom nj is offline  
Old 09-26-2008, 08:04 AM   #21
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
No, probably Sunday though.
CaysE is offline  
Old 09-26-2008, 08:25 AM   #22
chrisfrom nj
 
chrisfrom nj's Avatar
 
Join Date: Feb 2005
Location: west orange nj
Posts: 2,415
iTrader: (8)
i allso need the gas tank with the fuel lines will you sell the shell whats left on the car how bad is the floor rotted
chrisfrom nj is offline  
Old 09-26-2008, 11:15 AM   #23
Rich2279
 
Rich2279's Avatar
 
Join Date: Feb 2008
Location: Williamstown, NJ
Posts: 191
iTrader: (2)
Pics of the 3 pc. spoiler? Do you know if it will bolt to an '89?
__________________

1998 Mustang GT
1992 Mustang LX


Rich2279 is offline  
Old 09-26-2008, 11:32 AM   #24
CaysE
 
Join Date: Jun 2008
Location: Dirty Jersey
Posts: 65
iTrader: (2)
It still has the complete drivetrain with the TBI unit and air cleaner removed. Flowmaster exhaust. Fuel tank and lines all still on the car. The engine had a rod knock (my guess is a clogged oil pickup), the trans was in good shape, and the floorboards are good as far as I know. The only rot I've found is where the doors, fenders, and sideskirts all meet each other. Apparently this is fairly common on thirdgens.

Suspension is used KYB dampers, Eibach Sportlines, stock upper strut mounts, newly rebuilt a-arms per above, & stock swaybars. Stock disk/drum brakes. The Spohn/Moog steering parts are off the car but can easily be reinstalled at least for towing.

Exterior only has the following still on the car: complete rear bumper w/GFX, hatch with 3-piece wing, lexan t-tops with vinyl bag, grid taillights, and stock hood. Everything else is gone (front bumper, fenders, doors and sideskirts).

Interior still has the complete dash and cluster, Autometer water temp gauge, most of the center console with connected auto shifter and ebrake, front carpet, spare tire, and most interior panels removed but in the car. Seats, rear carpet, hatch pulldown motor, and one of the door panels are gone. Because the hatch motor is gone, the hatch will not close. You'll need some way to secure it if you want the whole car. I also have a vinyl (not plastic) dashpad from my '86 sport coupe. It isn't cracked, but the vinyl is torn away a bit at the driverside corner.

Found some audio stuff in the car, too. Crappy Sony headunit, Polk front speakers and Alpine Type-S rear speakers.

If you want the car as described here, haul it out of my garage for $500 and I'll throw in all the stock thirdgen parts I can find. If you want all the Spohn parts, ProKit springs, new dampers, new strut mounts, stainless brake hoses, L69 intake, a spare OEM headliner board, new roll of black headliner material, spare auto shifter with leather knob, and whatever else I can find, take everything for a grand. Absolutely everything. I have '92 and '86 Helms manuals that I'll give you, and probably a stack of other books and manuals, too. It's a treasure trove at that price.

Last edited by CaysE; 09-26-2008 at 11:38 AM.
CaysE is offline  
Old 09-26-2008, 11:35 AM   #25
chrisfrom nj
 
chrisfrom nj's Avatar
 
Join Date: Feb 2005
Location: west orange nj
Posts: 2,415
iTrader: (8)
Quote:
Originally Posted by CaysE View Post
It still has the complete drivetrain with the TBI unit and air cleaner removed. Flowmaster exhaust. Fuel tank and lines all still on the car.

Suspension is used KYB dampers, Eibach Sportlines, stock upper strut mounts, newly rebuilt a-arms per above, & stock swaybars. Stock disk/drum brakes. The Spohn/Moog steering parts are off the car but can easily be reinstalled at least for towing.

Exterior only has the following still on the car: complete rear bumper w/GFX, hatch with 3-piece wing, lexan t-tops with vinyl bag, grid taillights, and stock hood. Everything else is gone (front bumper, fenders, doors and sideskirts).

Interior still has the complete dash and cluster, Autometer water temp gauge, most of the center console with connected auto shifter and ebrake, front carpet, spare tire, and most interior panels removed but in the car. Seats, rear carpet, hatch pulldown motor, and one of the door panels are gone. Because the hatch motor is gone, the hatch will not close. You'll need some way to secure it if you want the whole car.

Found some audio stuff in the car, too. Crappy Sony headunit, Polk front speakers and Alpine Type-S rear speakers.

If you want the car as described here, haul it out of my garage for $500 and I'll throw in all the stock thirdgen parts I can find. If you want all the Spohn parts, ProKit springs, new dampers, new strut mounts, stainless brake hoses, L69 intake, a spare OEM headliner board, new roll of black headliner material, spare auto shifter with leather knob, and whatever else I can find, take everything for a grand. Absolutely everything. I have '92 and '86 Helms manuals that I'll give you, and probably a stack of other books and manuals, too. It's a treasure trove at that price.
i have to stop by to look at it when can i stop by
chrisfrom nj is offline  
Closed Thread

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Classified Forums > Classifieds Forums > For Sale - Automotive Parts

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 06:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.