Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Brake, Chassis and Suspension Tech

Notices


Reply
 
Thread Tools
Old 11-22-2009, 01:26 PM   #1
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Drive line Vibration

Around 80mph and above my car seems to start vibrating, seems to come from the passenger side front. I am pretty sure its not engine vibration, in neutral it revs up nice and smoothly.

Hard to tell if its transmission/drive shaft related.. to me it seemed to come from the front wheel area but again, I couldn't really tell exactly where it was coming from.

Does not sound like a header banging on the floor board but I plan on checking that, but since it only does it at higher speeds I am doubting that being at fault.

Plan is to swap front wheels and see if it follows to the driver side. And then re balance both fronts.

The other thought was maybe the drive shaft? I know that around that speed is where the stock drive shaft will start to make noise if it became un balanced.

Thoughts?
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-22-2009, 01:34 PM   #2
deadtrend1
11 second club / Moderator
 
deadtrend1's Avatar
 
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
iTrader: (11)
get the tires re balanced first. I had tot do it on my car recently and its better now.
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57

1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
deadtrend1 is offline   Reply With Quote
Old 11-22-2009, 02:01 PM   #3
69BirdX
12 Second Club
 
69BirdX's Avatar
 
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
iTrader: (0)
It's most likely tire or wheel related. I would check them first. You won't usualy notice tire vibration at low speeeds. A wheel weight may have been knocked off or moved.
__________________
www.Ames-Photography.smugmug.com
'98 Trans Am Chameleon..sold
'10 Mazdaspeed3... DD
'04 Pontiac GTO....Sunday Funday Special

69BirdX is offline   Reply With Quote
Old 11-22-2009, 02:02 PM   #4
MyFirstZ
 
MyFirstZ's Avatar
 
Join Date: May 2009
Location: Highland Mills, NY
Posts: 1,915
iTrader: (8)
Social Networks:

seems rather high speed to just to be a tire vibration, if you can find a place that can pin plate the wheels when they balance them.

check your suspension for play to, ball joints, bushings, tie rods and bearings.
__________________
2000 Camaro SS
610rwhp/570rwtq
LS2 440, 12 bolt 3.73, tranzilla t56

Last edited by MyFirstZ; 11-22-2009 at 02:03 PM.
MyFirstZ is offline   Reply With Quote
Old 11-22-2009, 02:03 PM   #5
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Quote:
Originally Posted by 69BirdX View Post
It's most likely tire or wheel related. I would check them first. You won't usualy notice tire vibration at low speeeds. A wheel weight may have been knocked off or moved.
That is what I am hoping it is. I had the front tires put on but a shop and I dunno their workmanship quality etc.

Hopefully a re balance will fix things.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-22-2009, 03:35 PM   #6
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
iTrader: (12)
i would rebalance the fronts. you feel it through the wheel right?
__________________
sweetbmxrider is offline   Reply With Quote
Old 11-22-2009, 03:36 PM   #7
S.J.SLEEPER
 
S.J.SLEEPER's Avatar
 
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
iTrader: (10)
tireswap to see if it changes to other side, & check your hub bearings too.
if you need one have a brand new in the box for ya,,,,,,,,cheap.
__________________
Quote:
Originally Posted by SRGN View Post
I never pulled into the staging beams at the track and saw a dyno in the other lane.
South Jersey Racecraft
S.J.SLEEPER is offline   Reply With Quote
Old 11-22-2009, 03:38 PM   #8
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Quote:
Originally Posted by sweetbmxrider View Post
i would rebalance the fronts. you feel it through the wheel right?
Nope, its more of a in car feeling. Wheel is fine. Nothing extreme.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-22-2009, 03:42 PM   #9
S.J.SLEEPER
 
S.J.SLEEPER's Avatar
 
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
iTrader: (10)
is the wheel attached to the spindle...attached to the control arm....attached to the kmember...... attached to the frame of the car.....attacxhed to the body.....seat attached to the frame/metalpan of car.....

then you could get a vibration through the car feeling like something else. been there done that, was a recommendation....
go chet in a hat and stay on one thread !!!












ha hah ah just f'n wit ya
__________________
Quote:
Originally Posted by SRGN View Post
I never pulled into the staging beams at the track and saw a dyno in the other lane.
South Jersey Racecraft
S.J.SLEEPER is offline   Reply With Quote
Old 11-22-2009, 03:44 PM   #10
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
I'll be in Beach haven this thursday, I will come steal your wheel hub.

But first off I am gonna get the wheels balanced and see how that does. No sense in making **** harder than it has to be.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home

Last edited by LTb1ow; 11-22-2009 at 03:45 PM.
LTb1ow is offline   Reply With Quote
Old 11-22-2009, 03:44 PM   #11
bandit88
Power Member / Load Driver
 
bandit88's Avatar
 
Join Date: May 2006
Location: PA
Posts: 2,016
iTrader: (1)
i got a fix....... don't go 80 or above
__________________
Quote:
Originally Posted by 79CamaroDiva View Post
yep. jenn loves teh leghumping.. so much so that most ppl dont realize her name belongs to a chick
I'd be unstoppable if not for law enforcement & physics

2011 Regal CXL TO2
bandit88 is offline   Reply With Quote
Old 11-22-2009, 03:45 PM   #12
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Quote:
Originally Posted by bandit88 View Post
i got a fix....... don't go 80 or above
But then how can I race at Atco?
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-22-2009, 03:59 PM   #13
BonzoHansen
Admin.
 
BonzoHansen's Avatar
 
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
iTrader: (27)
Quote:
Originally Posted by LTs1ow View Post
Nope, its more of a in car feeling. Wheel is fine. Nothing extreme.
very likely not front tires then.
__________________
Vent Windows Forever!

The looser the waistband, the deeper the quicksand. Or so I have read.

Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.

Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
BonzoHansen is offline   Reply With Quote
Old 11-22-2009, 04:00 PM   #14
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Quote:
Originally Posted by BonzoHansen View Post
very likely not front tires then.
This is bad news.

Still gonna check the fronts, and then I guess get the up in the air and check out the header/frame rail clearance. Hopefully its something dumb.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-22-2009, 04:06 PM   #15
BonzoHansen
Admin.
 
BonzoHansen's Avatar
 
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
iTrader: (27)
Can hurt to look but front wheel balance issues almost always shake the steering wheel.

http://www.tirerack.com/images/tires/vibechart.pdf

Back when I was int eh business I asked that 1st question "Is vibration noticed through steering wheel or through seats/floor?" maybe a million times working with customers. It is key.
__________________
Vent Windows Forever!

The looser the waistband, the deeper the quicksand. Or so I have read.

Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.

Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
BonzoHansen is offline   Reply With Quote
Old 11-22-2009, 04:08 PM   #16
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Good link. I just noticed it though cause it was the first time in while I had driven it and was able to hear things.

I will check as much as I can when I am home again.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-22-2009, 05:10 PM   #17
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
iTrader: (12)
yeah bonzo thats why i asked

we'll check a bunch of sheit out and see if something doesn't get fixed
__________________
sweetbmxrider is offline   Reply With Quote
Old 11-23-2009, 04:41 PM   #18
JerzLT1
Guest
 
Posts: n/a
i know someone who has an LS1 in their driveway with a drive shaft in it that doesnt vibrate at all. is it like a violent vibration? if its still doing it sunday you can show me what its actually doing at atco (if you come down)
  Reply With Quote
Old 11-23-2009, 05:08 PM   #19
BarneyMobile
9 Second Club
 
BarneyMobile's Avatar
 
Join Date: Dec 2004
Location: Merchantville
Posts: 518
iTrader: (2)
Try checking your drive shaft u-joint, If you have an adjustable torque arm, recheck your pinion angle.
__________________
Twisted Minds Racing

2000 SS M6
9.71 @ 142
BarneyMobile is offline   Reply With Quote
Old 11-23-2009, 05:27 PM   #20
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Quote:
Originally Posted by JerzLT1 View Post
i know someone who has an LS1 in their driveway with a drive shaft in it that doesnt vibrate at all. is it like a violent vibration? if its still doing it sunday you can show me what its actually doing at atco (if you come down)
Oh yea? How much would that person wanna let it go for?
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-23-2009, 06:51 PM   #21
GP99GT
Mr Fantastic
 
GP99GT's Avatar
 
Join Date: Aug 2004
Location: West Milford NJ
Posts: 7,917
iTrader: (2)
had a twisted driveshaft in my 87 mustang...vibrated like hell over 70ish
__________________
Matt

B18B1 FTW
GP99GT is offline   Reply With Quote
Old 11-23-2009, 08:38 PM   #22
transmaro93
 
Join Date: Dec 2004
Location: manchester, NJ
Posts: 1,775
iTrader: (2)
its most likely your drive shaft.. but i would still check tire balance first... my old steely would vibrate after 80 and get really bad around 90 then i put the ls1 in there and it was smooth as can be... i have one if you want it we can make a deal... i have a moly one to use with my rear.... but the aluminium is on the ca rright now because the stock yoke is smaller than the other one and i didnt want tranny fluid to leak out on first startup... if you come and help the car idle then i can take it off and move on to the next step of my project but i need it on for now till i get it running steady
__________________
97 Firebird Formula - 383LT1
15 Subaru WRX - 2.0L-turbo

Last edited by transmaro93; 11-23-2009 at 08:39 PM.
transmaro93 is offline   Reply With Quote
Old 11-23-2009, 08:57 PM   #23
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
I'll be down in the TR area this weekend to bode bad things unto your car.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 11-23-2009, 09:04 PM   #24
transmaro93
 
Join Date: Dec 2004
Location: manchester, NJ
Posts: 1,775
iTrader: (2)
i dont live in TR though?
__________________
97 Firebird Formula - 383LT1
15 Subaru WRX - 2.0L-turbo
transmaro93 is offline   Reply With Quote
Old 11-23-2009, 09:08 PM   #25
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,896
iTrader: (8)
Ah, well some place south of me. Either way.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Brake, Chassis and Suspension Tech


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 11:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.