 |
12-16-2009, 03:29 PM
|
#1
|
Join Date: Oct 2009
Posts: 443
|
What are the sway bar sizes for base coupe?
Just keeping my eye out for a good deal on used sway bars. Not sure what the fr/rr size are for the base model coupe. Anyone know?
__________________
1998 Firebird Coupe
Mods: 3.73 Gears, Eaton TrueTrac, PCM Tune, LS1 Aluminum Drive Shaft, Cold Air Intake, 180 Thermostat, Magnaflow Cat-Back Exhaust, Moog LCA busings.
My Firebird Projects : Click Here
|
|
|
|
12-16-2009, 04:30 PM
|
#2
|
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
the only 4th gen bars that were different were the front sway bars on the ss and ws6 cars. the v6 cars and the base v8 cars had the same stuff
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
|
|
12-16-2009, 04:34 PM
|
#3
|
Join Date: Oct 2009
Posts: 443
|
Does that mean the base coupe has a 32/19 mm pair of bars?
__________________
1998 Firebird Coupe
Mods: 3.73 Gears, Eaton TrueTrac, PCM Tune, LS1 Aluminum Drive Shaft, Cold Air Intake, 180 Thermostat, Magnaflow Cat-Back Exhaust, Moog LCA busings.
My Firebird Projects : Click Here
|
|
|
|
|
12-16-2009, 04:54 PM
|
#4
|
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
i lied.....
The V6 models have a 28mm front sway bar and a 15mm rear sway bar. The spring rates are 257 pounds per inch in the front and 114 pounds per inch in the rear.
The regular V8s have a 30mm front sway bar and a 19mm rear sway bar. The springs are 292 pounds per inch up front and 114 pounds per inch in the rear. The 1LE and WS6 suspension package has a 32mm front sway bar and 19mm rear sway bar (note, 1993 and early 1994 1LEs got a 21 mm rear bar). The springs are 360 pounds per inch up front and 130-180 pounds per inch (progressive) in the rear (note, 1993 1LEs got the same springs as regular V8s).
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
Last edited by Mike; 12-16-2009 at 04:54 PM.
|
|
|
|
|
12-16-2009, 05:00 PM
|
#5
|
Join Date: Oct 2009
Posts: 443
|
Thanks for the update. So I guess that even a 30/17 set would be an upgrade.
UPDATE: Took a caliper to the front sway bar, and it is 28mm. Doesn't hurt to be sure! 
__________________
1998 Firebird Coupe
Mods: 3.73 Gears, Eaton TrueTrac, PCM Tune, LS1 Aluminum Drive Shaft, Cold Air Intake, 180 Thermostat, Magnaflow Cat-Back Exhaust, Moog LCA busings.
My Firebird Projects : Click Here
Last edited by Mark42; 12-16-2009 at 05:13 PM.
|
|
|
|
|
12-16-2009, 06:06 PM
|
#6
|
|
Power Member/NJFBOA Bookie/Moderator
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
|
I have my 19mm rear bar you can have for 20 bucks
|
|
|
|
|
12-17-2009, 06:50 AM
|
#7
|
Join Date: Oct 2009
Posts: 443
|
Quote:
Originally Posted by Jersey Mike
I have my 19mm rear bar you can have for 20 bucks
|
Thanks! Now if someone can provide a 32mm bar, I'm all set.
__________________
1998 Firebird Coupe
Mods: 3.73 Gears, Eaton TrueTrac, PCM Tune, LS1 Aluminum Drive Shaft, Cold Air Intake, 180 Thermostat, Magnaflow Cat-Back Exhaust, Moog LCA busings.
My Firebird Projects : Click Here
|
|
|
|
|
12-24-2009, 09:28 AM
|
#8
|
Join Date: Oct 2009
Posts: 443
|
Ok, I now have a 30/19 set from a Formula. Thanks for the offers.
__________________
1998 Firebird Coupe
Mods: 3.73 Gears, Eaton TrueTrac, PCM Tune, LS1 Aluminum Drive Shaft, Cold Air Intake, 180 Thermostat, Magnaflow Cat-Back Exhaust, Moog LCA busings.
My Firebird Projects : Click Here
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
