|
3rd gen suspension goodies
Parting out my 92 project.
all parts have under 5k miles on them, parts are all in good shape but are used. I will clean them as best i can before shipping.
-UMI strut mounts, built 3/4" taller than their normal offering. $175 shipped
**may not clear the master cylinder without shimming the booster**
-UMI tubular a-arms. Delrin bushings, 3/4" taller balljoints, adjustable steering stops. $500 shipped
-Modified 92 'x' heavy spindles, Kore3 billet 7071 hubs with long 1/2-20 screw in studs, billet dust cap, solid bearing spacers, steering relocation brackets. Steering brackets clear 18" wheels with as much backspacing as you can fit on the car, dont know about anything else, never ran a different setup. Hubs are 1le spec +.25". long aluminum tie rod adjuster sleeves and outer rod ends, bump stop adjustable $600 shipped.
might have more as i get parts off.
-I have a set of 4, 18x10.5 apex arc-8 wheels and 295-35 tires too, direct fit on the front with my hubs, rear needs a 10mm spacer. wheels are drilled to the proper bolt pattern and weight 19.5lbs each. ask if interested, wheels are $341 each new and tires were almost 300$ each, so be realistic dont expect to get them for $1000....
all shipping is included in the price, paypal or cash in person only. Shipping only to the lower 48. Can ship elsewhere, but buyer pays actual shipping.
any questions, message me here or if local text call
Phil
9082689201
Last edited by //<86TA>\\; 12-17-2016 at 09:04 AM.
|
