2000 SLP SS Officially Being Parted Out - NJFBOA - Home of New Jersey's Camaros and Firebirds

Gio93z · 03-13-2006, 04:48 PM

As some of you may have heard, I briefly mentioned once before that my boss had crashed his 2000 SS. I wasn't sure what he was doing with the car but he gave word to me that he bought it back and is parting it out. I don't have every detail but this is what I know.

It is a 2000 pewter Camaro SLP SS. Car has 12,000 original miles on it. Always garage kept and did not see snow or bad weather. Car was hit on the driver side front right where the hood and front fender meet. Significant body and structural damage in that area. Everything is for sale on the car including the motor. The motor is the most expensive part so keep that in mind anyone who is looking for an LS1. Everything on the car is in mint condition EXCEPT FOR the hood, front bumper, and driver side front fender. If anyone has interest in any of the parts please contact me by phone or you can call the shop where I work and ask for Kevin. he is the owner of the car and the shop.

I encourage anyone who has any interest in any parts to take a minute out of their day and stop by the shop to check the car out and take a peek at the parts you are interested in. Also, it doesn't hurt to talk to my boss Kevin as he can give you full detail of what aftermarket parts the car is equipped with. I know it has a full exhaust including a Magnaflow cat-back exhaust and I believe SLP long tube ceramic coated headers. The real nice ones is what I'm getting at. Also has a set of aftermarket rims, which I dont have size or manufacturer specs of, and the SS rims, which I currently have on my camaro. I'm using the SS rims and tires, so either the SS rims are for sale or my chrome C5 rims and tires are for sale. Your choice. All kinds of suspension parts and too many items to name.

CONTACT!

Giovanni (me) 201 - 523 - 0591 or on AIM at EastCoast93z or e-mail me at G.Araneo@gmail.com

Kevin (owner) 201 - 262 - 6611 at the shop

If anyone is around the shop is located on the corner of Midland Ave. and Farview Ave. in Paramus, right near the Paramus Park Mall.

Hope to hear from you guys 'n girls.

z28c4maro82z · 03-13-2006, 06:06 PM

I may be interested in the rear. Let me know the specs on it, but tell him to name a price. I know the stock 10 bolts go cheap so let me know.

The carpet is another thing I may be interested in, mine is getting beat up.

If it's a t-top car I maybe interested in the t-tops. 1 of mine has the handle broken, and the teeth stripped so let me know what the price on the passenger side t-top would be

camaro2you · 03-13-2006, 06:46 PM

can you get me a price on the magnaflow? thanks

Savage_Messiah · 03-13-2006, 07:28 PM

What color was it and is the hatch for sale and how much?

Gio93z · 03-13-2006, 08:33 PM

um, the car is Pewter.......the rear is a 10 bolt but dont expect it dirt cheap - it's brand new...and the interior is already claimed by me, including the seats, door panels and carpet, along with the rear SS spoiler..........

yes the car is t top

guys best bet is to stop by the shop 2morrow - i will be there from 330 until we close around 600 or 630......if you dont stop by then at least call me or the shop

201 - 523 - 0591 my cell
201 - 262 - 6611 ask for Kevin - this is the shop number

oh, the magnaflow i think was going for around 200 or maybe a fuzz more than that - dont quote me, just what i thought i over heard

Gio93z · 03-14-2006, 07:59 PM

Magnaflow exhaust = $250.00 and its brand new - low mileage on it and being that the car was garaged kept, well, you know what i'm getting at

also, the headers are hooker long tube jet coated er ceramic coated - i forget what he said - they are in mint condition and retail for $800.00 - $900.00. so if interested, make an offer

camaro2you · 03-14-2006, 08:13 PM

i definatly want the magnaflow but i would need someone to pick it up for me and meet me half way or something like that.

Gio93z · 03-14-2006, 08:18 PM

well, that shouldnt be a problem......do you want to wire me the money thru paypal, or give it to me cash if i meet you with the exhaust - ..... regardless, let me know if you 100% want it b/c i will tell my boss 2morrow when i go to work - and i will remove it from his car......IM me online at EastCoast93z if you have aol or aim if you'd like - btw - the exhaust is pretty sick - i was gonna buy it from him but im already buiying the spoiler and interior and i have $0.00 now

V · 03-14-2006, 08:41 PM

dahm..i wanted the fender... i cant think of anything i need right now.

oh what about the headliner? gimme a price. i dont make offers because i hate to insult people lol. i can remove it myself to make sure its undamaged.

Gio93z · 03-14-2006, 08:45 PM

i just called my boss and left him a message about how much he would like for it - and assuming the deal goes well, no problem with you removing it yourself - i will respond again as soon as i have a price - and which fender did you need just to be sure - the damaged one is the driver side fender.......

z28c4maro82z · 03-14-2006, 08:54 PM

How much for the springs and shocks? Tell him to give me a price on that.

Gio93z · 03-14-2006, 09:00 PM

i will add that to the list of prices of need to get from him - there are so many different parts that i justhave to get prices as 'you' ask for the parts - i will call him again 2nite and try and get those prices - but if i cant - i will just get them 2morrow when i go to work - and i'll find out if the springs and shocks/struts are stock - im pretty sure the springs are but the shocks/struts may be aftermarket - i'll let you know...i have my stock springs off my 93 z28 if you have any interest of those......tty soon

V · 03-14-2006, 09:20 PM

yeha i needed the drivers, when i had my car only 4 days(500miles) i hit a deer and had the fender replaced, i told them not to blend the paint to the rest of the car because the match was very close, but now 4.5 years later, in some lighting its noticeable so i lookign for an oem pewter drivers fender, guess ill keep looking lol.

Gio93z · 03-14-2006, 09:43 PM

ok just spoke to my boss.....here's what i found out about some parts and prices....

PARTS FOR SALE
- Hooker Super Comp ceramic coated headers in mint condition with 600 miles on them - retail between $800 - $900. make reasonable offer

- Off road y-pipe with cats

- stock exhaust manifolds with cats

- headliner he'd like about 80 for it

- rear end (3:23 or 3:40 we have to check the actual gear ratio - $1,250.00 including brakes. calipers and rotors or $1,000.00 for just the rear end with axles

- Hotchkis strut bar, black - $170.00

- T Burn red powdercoated rear control arms upper/lower - make offer - include p-urethane bushings

- Hotchkis panhard bar - $150.00

- bilstein shock and struts and front and rear sway bars - $750.00 or if wanted individually then make an offer

- ss spoiler, mint condition pewter with LED brake light - $250.00 YES IT IS FOR SALE EVEN THOUGH I WANT IT

- Right Front headlight and housing - make offer

- right fornt fog light - make offer

- driveshaft NOT INCLUDING SLIP YOKE - $225.00 negotiable

- make offers on any other parts -

Tru2Chevy · 03-14-2006, 10:29 PM

Quote:

Originally Posted by Gio93z

- rear end (3:23 or 3:40 we have to check the actual gear ratio - $1,250.00 including brakes. calipers and rotors or $1,000.00 for just the rear end with axles

- T Burn red powdercoated rear control arms upper/lower - make offer - include p-urethane bushings

- driveshaft NOT INCLUDING SLIP YOKE - $225.00 negotiable

Is that a stock 10 bolt rear?

Rear upper control arms? Is that some kind of custom setup?

Stock Driveshaft?

- Justin

z28c4maro82z · 03-15-2006, 01:37 PM

The shocks, and springs I may be interested in.

How is 25 bucks for the passenger side headlight?

camaro2you · 03-15-2006, 03:29 PM

anyway you can get me a pic of the magnaflow and is that price of 250 set? thanks again

Gio93z · 03-15-2006, 06:47 PM

ha - no such thing as a rear upper control arm - i was a little bugged out when he said that myself - it is teh lower control arms he meant - whoops - anyways um, cant take pic of the exhaust, at least not now - but being that i'd meet you with the exhaust rather than ship it out - should show im confident that condition is mint - um, what else...shocks and struts - i dont know how much he wants - make an offer i suppose

Ian · 03-15-2006, 07:33 PM

How much for the motor? will it come with all the accessories, PCM and harness?

What kind of trans and how much for that?

z28c4maro82z · 03-15-2006, 08:59 PM

150 bucks for the shocks and springs as long as they are blisteins.

Rob WS6 · 03-15-2006, 09:50 PM

$1250 for a stock 10 bolt?

Gio93z · 03-15-2006, 11:27 PM

1250 for the 10 bolt rear....and the slotted rotors, pads, calipers......full rear axle assembly - ......so, yes

and i gotta ask my boss if 150 is do-able for the springs and shocks/struts.........

V · 03-16-2006, 01:54 PM

See if he'll take 70 for the headliner. I have all parts for a ttop conversion setup except that part.

Gio93z · 03-16-2006, 06:20 PM

i will ask him if 70 is okay - i will try and convince him so that shouldnt be a problem - the car is getting disassembled this weekend ...... um, the motor is gonna sell for about $6000.00 and includes wiring and tuned pcm.....motor is mint

and it is $1000.00 for the rear end and $1250.00 for the rear end including brake assembly.........and i dont think that is alot of money for either option.....ur talking an SS rear with 3:40 gears and slotted rotors, calipers, and brakes....and the car averaged 2000 miles per year, hence the 12000 miles on it right now - so that price isnt going to budge much unless you call my boss and talk to him, which if you are interested in it, it'd be worth calling and trying to work the price

camaro2you · 03-16-2006, 08:13 PM

if he jsut wants to sell the rear end rotors/calipers/pads/backing plates let me know.