Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Projects

Notices


Reply
 
Thread Tools
Old 08-03-2019, 02:45 PM   #2276
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by LS1ow View Post
nonsense, 2.4ghz good for atleast 1 mile.
Mmkay. Bring a spare revo
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Old 08-06-2019, 12:57 PM   #2277
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

tracking numbers for cage received.


so scare.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 08-06-2019, 03:54 PM   #2278
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Should be a simple install on the Revo.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Old 08-07-2019, 06:34 AM   #2279
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

Quote:
Originally Posted by Blackbirdws6 View Post
Should be a simple install on the Revo.
pull out all the threads.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 08-09-2019, 07:37 AM   #2280
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

Swing set arrived. Pre-Notched for my pleasure.

__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 08-13-2019, 10:09 AM   #2281
qwikz28
13 Second Club / Moderator
 
qwikz28's Avatar
 
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,683
iTrader: (6)
Social Networks:

Quote:
Originally Posted by LS1ow View Post
Swing set arrived. Pre-Notched for my pleasure.

TFTI
__________________
Quote:
Originally Posted by LS1ow View Post
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
qwikz28 is offline   Reply With Quote
Old 08-28-2019, 06:27 AM   #2282
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

so somewhere in the past 4 months i lost the nut that holds the main power cable from the battery to the fuse box. I tried a few different ones i had sitting in hardware drawers, but no success.

Anyone know what size is needed?

its the nut that is under the red cover.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 08-28-2019, 06:44 AM   #2283
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Since the car is so light, can't you take it to a Lowe's or Home Depot and spin it in that bolt/nut finder?
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Old 08-28-2019, 06:49 AM   #2284
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

Quote:
Originally Posted by Blackbirdws6 View Post
Since the car is so light, can't you take it to a Lowe's or Home Depot and spin it in that bolt/nut finder?
i did that yesterday but didnt have enough clearance to spin car completely around since its only mounted like 5' off the ground.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 08-28-2019, 08:26 AM   #2285
MDSheds_SS
11 sec club
 
MDSheds_SS's Avatar
 
Join Date: Aug 2014
Location: Woodbridge
Posts: 834
iTrader: (1)
Social Networks:

If my memory serves me right, it’s the same size as a starter solenoid for an older ford. I use those for snow plowing cause they are heavy duty and easily accessible.
__________________
99 Z28 Trick Flow 215s milled to 61cc 228/232 Cam Fast 102 built 4l65e trans 4000 converter 12 bolt 410s Electric WP deleted PS/AC Dyno & Track tuned
2015 ATS Coupe. AWD 2.0 Turbo
2012 2500hd Silverado with LTZ 20s on 35x12.5x20
86 Buick GN Lesabre 1 of 117 (4-Sale)
MDSheds_SS is offline   Reply With Quote
Old 08-28-2019, 09:17 AM   #2286
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
3/8NC16
__________________
sweetbmxrider is offline   Reply With Quote
Old 08-28-2019, 10:16 AM   #2287
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Quote:
Originally Posted by LS1ow View Post
i did that yesterday but didnt have enough clearance to spin car completely around since its only mounted like 5' off the ground.
I would have at least thought you would just ripped it off from HD and brought it home. It's one of those things I should just buy before doing my next project.
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Old 08-28-2019, 08:59 PM   #2288
KirkEvil
10 Second Club
 
KirkEvil's Avatar
 
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
iTrader: (11)
Quote:
Originally Posted by LS1ow View Post
so somewhere in the past 4 months i lost the nut that holds the main power cable from the battery to the fuse box. I tried a few different ones i had sitting in hardware drawers, but no success.

Anyone know what size is needed?

its the nut that is under the red cover.
Believe it is M8x1.25.

Mcmaster 97400A102 or try lowes for SS flange nuts
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
KirkEvil is offline   Reply With Quote
Old 08-29-2019, 11:46 AM   #2289
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
Quote:
Originally Posted by KirkEvil View Post
Believe it is M8x1.25.

Mcmaster 97400A102 or try lowes for SS flange nuts
__________________
sweetbmxrider is offline   Reply With Quote
Old 09-12-2019, 12:39 PM   #2290
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

Not much to update on.

Cage work as begun. Went with an S&W kit, so far so good. Main hoop was a little long on both sides, but other than that so far its going smooth.

Also opted to get a set of these bad girls. Aluminum door panels from Big Wig RaceCars. Precut and drilled, beveled border, and have an aluminum bracket on them to reuse factory switches.

__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 09-14-2019, 07:39 AM   #2291
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

really wanted to leave the door panels raw, but figured satin black would tie in much better and wouldn't immediately catch any potential uhhh... clients... eyes.



install was super simple. Completely reversible as well. Supplied everything you need to install, even the drill bit. The hardware is really nice as well. They are counter sunk screws with counter sunk button washers. Looks nice. I may end up swapping the stainless ones for black ones if i can find them, but this will certainly do.

__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 09-15-2019, 07:00 AM   #2292
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Looks good. What's the weight savings on the panels?
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Old 09-16-2019, 07:01 AM   #2293
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
Pretty slick, sir.
__________________
sweetbmxrider is offline   Reply With Quote
Old 09-16-2019, 07:32 AM   #2294
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

Quote:
Originally Posted by Blackbirdws6 View Post
Looks good. What's the weight savings on the panels?
with panels/door speakers/magic it should be 25/30lbs
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 09-27-2019, 09:49 AM   #2295
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

cage is in place and ready for final install. buddy is coming down with tig on monday night to burn her in.

Plan is slide cage forwards and weld rear bars to main hoop, slide cage back into position and bolt it. was going to skip bolting in all together, but i figure bolting it down will suck the plates "form" the plates to the body better than a hammer will. Then weld the plates in.


..and hopefully never test it out.





__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"

Last edited by LS1ow; 09-27-2019 at 09:51 AM.
LS1ow is offline   Reply With Quote
Old 09-27-2019, 10:48 AM   #2296
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
Be careful on driver ankle biter, your fuel lines are right under it.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 09-27-2019, 12:24 PM   #2297
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

Quote:
Originally Posted by LTb1ow View Post
Be careful on driver ankle biter, your fuel lines are right under it.
good thinkin. Should be able to slide welding blanket between lines and floor
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 10-05-2019, 09:00 AM   #2298
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

swing set 80% in.


Tubes completely Tig'd. Plates bolted down and tac'd. Will completely weld plates in Monday/Tuesday.

Then interior goes back in and we get to tuning.



__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 10-14-2019, 10:12 AM   #2299
LS1ow
Power Member / trans break does not equal transbrake
 
LS1ow's Avatar
 
Join Date: May 2009
Location: The Meadowlands
Posts: 4,512
iTrader: (15)
Social Networks:

finally got around to finishing cage install. had a hard time with some spots with the metal being to thin and undercoat sucking through and messing up the weld.

but all is done now. Laid first coat of paint on it last night as well, well give more coats today and then toss interior back in.







__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
LS1ow is offline   Reply With Quote
Old 10-14-2019, 10:29 AM   #2300
Blackbirdws6
Lord of the rings / 10 Second Club / Meet Coordinator
 
Blackbirdws6's Avatar
 
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,351
iTrader: (3)
Congrats on not burning the car down. Did you get an x-ray on the welds?
__________________

97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140

'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
Blackbirdws6 is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Projects

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 01:18 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.