Open a speed shop...gm/ford/race

[Jared1970Chevelle]

Chevy/gm


ls balancer
ls belt tensioners
ls 28 lb injectors
GM corvette/ls6/ls1 Hydraulic Roller lifters....
PN GP1011
3rd gen camaro/firebird blower motor
3rd gen ecm ecu camaro/firebird airbag computer...
3rd gen camaro 01227165 Remanufactured ECM with a red jet superchip... 8920-A for 350 TPI camaro or firebird Automatic trans...1989 camaro or firebird....
4th gen camaro b4c taillights with police strobes, front strobes, and controller box...
350 bored .030 over 4 bolt main block....638 block 14093638...350...87-95...4 bolt main...one-piece rear seal also got 30 over trw pistons for sale too
gm heads.... 333882 1.94 1.52 valved


1968 Camaro fender BRAND NEW
1968 camaro fender original (needs some work)
1970-1976 (1971) Camaro glove box door mint…
1968-1972 Chevelle stereo dash pad…
1968-72 a-body bumper jacks….
1968-72 Door glass…
1968-72 Radiator support MINTT


8.2 inch A body rear... 10 bolt... just the case and chrome cover nothing in it.... axle tubes and ends all welded up…..

Garrett 88mm 88 mm inducer 6 inch inlet 4 inch outlet

Garrett 91mm 91 mm inducer 6 inch inlet…. I will include a large rear housing but needs a smaller one for tight cars (150-200 bucks depending on what you need)

Diablosport predator tuner.... brand new never used... U7198 works on 99-03 camaro firebird corvettes.....and other applications...5.3s etc... escalades...
DiabloSport Predator Programmer
1999-2002 GM V8
1999-2003 LS1/LS6 engine



hypercoils

1812B0125
2.5" x 12" x 125 Pound Spring

1814B0175
2.5" x 14" x 175 Pound Spring

LIKE turbonetics waste gate control valve
grand national champion racing products pushrods
grand national wire harness with provisions for F.A.S.T. standalone
grand national EGT probe for tailpipe
grand national alcohol/methanol injection kit
grand national electric fan with shroud….
edelbrock pn 8504 intake bolts
used flex fan spacer
crane cams graphite cam gear
Trailer electric brake controller and actuator
BBC original orange corvette valve covers
BBC BRODIX Aluminum valve covers with –an bungs
BBC front motorplates... 2 piece aluminum kit
BBC BDS blower systems aluminum cog system for vortec mondo or roots blower 5 piece kit
BBC milodon deep oil pan #30950
bbc pushrods...
Jesel pushrods 9.150 .080
Jesel pushrods 8.250 .080
Comp cams pushrods
8.000 .080
8.900 .080
BBC 4500 spacers and 4150 to 4500 adapter ported by brandywine performance
1982-02 kyb gas-adjust rear camaro shocks
2 sets of glass Ttops for camaro firebird
Gta map pouch…
Holley Fuel Pressure Regulator 34R-6657B with mount
Harwood hood scoop

18 DEGREE STUFF (more info if interested)

2 sets of JE 18 degree gas ported pistons with wrist pins
crower roller lifters
jesel shaft mount aluminum rocker arms..
Aluminum rods…
Etc etc etc….


FORD stuff

PARTING OUT A 86 GT TTOP car…. Stick setup…. Etc… or sell as whole…
Original Gt40 Tubular Upper and Lower in great condition
South Side Machine LCA’s
Aluminum Sheetmetal wing
Vortech aftercooler Kit with aluminum water tank
JE pistons for Yates heads…. Small bore…. 4.060 and 4.062 bores……
cobra finned valve covers for efi
kenne bell ram air scoop for under the front bumper….
t5 center console plate with leather shroud
lower gt side ground effect black
ford mustang 4 lug 5 star eagle alloy wheels 14x6 15x7
1987-1988 thunderbird turbocoupe low miles cluster...
2 Sets of 8 19 lb injectors
Ansen BBF scattershield…. Vintage late 60s….

2 different Vortech Aftercooler Systems for 1986-1993 Ford Mustang 5.0L (satin)

i got 2 complete kits to choose from... these are good for turbo or up to a T trim... the better kit has a aluminum coolant tank and a new upgraded heat exchanger.... the other kit needs a cheap gasket from vortech... both kits will be sprawled out on the floor for you to see... bring cash.. will show... looking for 1000 for the one kit and 1200 for the mint kit....


Autometer Gauges (some sold not sure which ones will check box and update asap)

Autometer Gauges
3 ¾ ‘s
Phantom Tach 0-10k rpm
2 5/8’s
Phantom Water Temp 100-250 degrees
Phantom Oil Pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Oil pressure 0-100 psi
Sport Comp Vacuum #3471
Sport Comp Vacuum / Boost 20 psi
Sport Comp Vacuum / Boost 20psi
Sport Comp #3411 fuel 0-15psi
Sport Comp #3431 Water Temp 140-280 degrees
Summit psi fuel gauge for fuel rail…..0-15 psi
Ultra Light Pro comp Water Temp 130-280 degrees
Brand New in boxes
- #5831 phantom water temp 130-280 2 5/8
-#5712 phantom fuel pressure 0-100psi 2 1/16
-#3312 Sport comp fuel pressure 0-100psi 2 1/16
-Sport comp 0-30 vacuum in Hg 2 1/16
Will trade for 2 5/8 Ultra light gauges….or anything else of interest that I might be able to use ….

TIRESSSSSS

Hoosier 29 x 12 x 15 D05 compound slicks
Hoosier Quick time pros 29 x 14.5 x 15 d.o.t (12 inch tread street tire)
MT 28x13.5x15 et street….
MT et street drag radials on camaro rims… 255 50 16
chrome gmc denali wheels and tires... 2 tires are in good shape... other 2 need rims need tires.....

MISC

Harwood Fiberglass Scoop
Harwood #487-3163
Areo Mini II Scoop
Overall: 31-1/2''L x 7''H
Base: 30''L x 15''W
Opening: 3-1/2'' x 12-1/2''
1962 olds convertible top boot cover teal blue NEW
Craftsman tool box…4 draw on top 3 on bottom with big cubby hole on bottom
Johhny Lightning collector coins… gold and silver series 1-7
AIR TOOLS - 3/8s air gun, air hammer, maybe 1 or 2 others need to check
2 pairs of brand new jensen 175 watt 6x9 speakers
dozen 24V dc 40 Amp relays brand new

I Have more stuff that I recently picked up…. And will update the list when I go through the rest of my storage units….


OPEN A SPEED SHOP...
$$$$$$$$$$$$ 3,000 firm $$$$$$$$$$$$$$$

might part some stuff out and lower the price if interested

[LS1ow]

how much for the italian lions???

lol jk, i want some stuff jared. i just texted you. get back to me in the AM

[Jared1970Chevelle]

call me

[Jared1970Chevelle]

All needs to go asap... losing my storage unit in two weeks and the less i have to move to my grandparents the better ( it will not all fit there might be throwing some stuff out)

[92REDBIRD]

MT et street drag radials 255 50 16 what condition are they in? Do you have pics?

[Jared1970Chevelle]

[Jared1970Chevelle]

rims and tires sold and a few other things.... if you want one piece or all let me know asap.... need money bad

[Flippindabird]

prices ?

[madness410]

the b4c tail lights can you separate the strobe kit?

[Jared1970Chevelle]

Originally Posted by Flippindabird

prices ?

as per forum rules there is a price in the ad for everything.... 3000 firm...

buttt if people want one or two things i can do that and adjust the 3000 firm price for the lot

[Flippindabird]

prices on the tires

[Jared1970Chevelle]

which ones.... drag radials and rims sold

[Jared1970Chevelle]

everything must go make offers

[S.J.SLEEPER]

prices & pics on 88 & 91 turbos?
send to:
sj383z28@verizon.net

thanks

[Frosty]

Are either of the the 2 1/16'' fuel pressure gauges electric?

EDIT: Never mind, both are mechanical