quick 305? - Page 2 - NJFBOA - Home of New Jersey's Camaros and Firebirds

BigAls87Z28 · 01-05-2006, 06:46 PM

As for modding a 305, it doesnt cost that much. I got a ZZ4 cam for 120 bucks shipped, Stock LB9 heads worked and installed with larger stainless 1.94/1.5 valves with .550 springs for 350 bucks, Pro Mag Roller Rockers 1.6 ratio for 160, and the rest of the mods were free, except the headers. I never really got it running due to lack of time and increase in breaking things, but I dont see anythign wrong with moddifying a 305.

enRo · 01-05-2006, 07:43 PM

Quick 305? Nice oxymoron

84HOtransam · 01-05-2006, 09:10 PM

Quote:

Originally Posted by BigDaddyKane

Quick 305? Nice oxymoron

14.4@96.66.... 90% hum 90 degree air temp...full exhaust and no air filter

78camaro · 01-05-2006, 09:58 PM

Quote:

Originally Posted by 84HOtransam

14.4@96.66.... 90% hum 90 degree air temp...full exhaust and no air filter

correct me if im wrong but when you ran that was the track a bit wet to?

band77one · 01-05-2006, 10:35 PM

Big Al, was that 305 TPI or what ? i heard its really expensive to tune a car once u get the cam/heads done if its fuel injected

Savage_Messiah · 01-05-2006, 10:46 PM

Quote:

Originally Posted by BigDaddyKane

Quick 305? Nice oxymoron

Noah you would know!! haha

misterjuice · 01-06-2006, 10:11 AM

Quote:

Originally Posted by BigAls87Z28

As for modding a 305, it doesnt cost that much. I got a ZZ4 cam for 120 bucks shipped, Stock LB9 heads worked and installed with larger stainless 1.94/1.5 valves with .550 springs for 350 bucks, Pro Mag Roller Rockers 1.6 ratio for 160, and the rest of the mods were free, except the headers. I never really got it running due to lack of time and increase in breaking things, but I dont see anythign wrong with moddifying a 305.

Don't forget the little hammer, and water melons... Al

NJSPEEDER · 01-06-2006, 11:54 AM

Quote:

Originally Posted by band77one

Big Al, was that 305 TPI or what ? i heard its really expensive to tune a car once u get the cam/heads done if its fuel injected

professional tuning for computer controlled engines costs about the same as a professional carb tune. there are a few people around here that do tuning or you can go to www.thirdgen.org and read up on how to do it yourself. really isn't diffeicult to tune with the software that is out now and it is really cheap to get into, abut the price of 1 professional tune can get you everything to tune forever.

enRo · 01-06-2006, 01:09 PM

Quote:

Originally Posted by 84HOtransam

14.4@96.66.... 90% hum 90 degree air temp...full exhaust and no air filter

and how much weight reduction? The only attempt to making a 305 fast is forced induction and/or weight reduction IMHO ... Ive owned all the third gen 305's except CFI, and they all blow.. but to each their own. the LG4 was loud after full exhaust, the L03 was great on gas, and the TPI... well... it was ok.

NJSPEEDER · 01-06-2006, 02:31 PM

my LO3 went consistant 14.20's weighing in at 3280 at the line. stock cam adn chip, with working a/c, pw, pl, power hatch release, stereo still in the car. it was a t-top car too

BigAls87Z28 · 01-06-2006, 10:36 PM

Prevo is our resident tuner, but I belive he is busy with schoo now? I dunno, havent seen him or heard from him. That would be the guy to go too, dunno if anyone else has any experiance with OBD I PROM tuning.
You can do it yourself, I still have most of the software as I tried to get serious with it in college, but it never panned out.

enRo · 01-06-2006, 11:40 PM

Quote:

Originally Posted by NJSPEEDER

my LO3 went consistant 14.20's weighing in at 3280 at the line. stock cam adn chip, with working a/c, pw, pl, power hatch release, stereo still in the car. it was a t-top car too

Ok, I can see 14.20 from an LO3 .... DOWNHILL

I have to admit tho, power+sound to city MPG was pretty decent... other than that, my bone stock LO3 was slower than a constipated bowel...

Tru2Chevy · 01-07-2006, 12:15 AM

Quote:

Originally Posted by BigDaddyKane

Ok, I can see 14.20 from an LO3 .... DOWNHILL

I have to admit tho, power+sound to city MPG was pretty decent... other than that, my bone stock LO3 was slower than a constipated bowel...

He had edelbrock aluminum heads and every free mod you could think of with 3.54 gears in a dana 44. I'll host up a run or two and post links in a moment

- Justin

NJSPEEDER · 01-07-2006, 12:23 AM

my car used to sound and look mean, too bad it was only a 14second warrior. lol
91-92 z28 spoiler, 3inch harwood cowl hood, edelbrock headers, !cat, borla w/open plate. at WOT it sounded like open headers.
i honestly could not get anyone to bite at a stop light in that car. between teh pipes and rolling on slicks adn skinnies 24/7 no one woudl ever step up.

Tru2Chevy · 01-07-2006, 12:23 AM

Tim running the 14.20:
http://www.njfboa.org/JustinImages/tim1.avi

Tim schooling some guy talking smack with his brand new 'stang:
http://www.njfboa.org/JustinImages/tim2.avi

- Justin

NJSPEEDER · 01-07-2006, 12:26 AM

wow, i haven't watched these in a while. i miss that car.

enRo · 01-07-2006, 12:32 AM

Quote:

Originally Posted by Tru2Chevy

He had edelbrock aluminum heads and every free mod you could think of with 3.54 gears in a dana 44. I'll host up a run or two and post links in a moment

- Justin

I never said I didnt believe him, hes all over TGO with those times... I always wanted to build a 305 but after extensive research, its just a waste cuz youll get much more out of the 350

*EDIT* Looks like that car got off the line reallllllllly nicely

GJ Id take a black 91-92 Z28 anyday

NJSPEEDER · 01-07-2006, 02:36 AM

unfortunately there wasn't much knowledge of how to develop tbi at the time i had and spent lots of money on that car. if i had i tto do all over again i would jsut drop in 4.10 gears, LT1 cam, get a carb intake and make an adaptor plate, drop a 3k stall and a shift kit in it, tune and run 12's.
everyone cries about the swirl port heads on the tbi cars, too bad the cam is so small that it can't even take advantage of the stock flow available.

as far as building a 305 being a waste, like i said before, if you have a good running engine start collecting parts. whatever you can bolt on now, go for it. once you build the solid 350 you really want do the swap. there is no need to pull a perfectly good engine until a suitable replacement is ready.

misterjuice · 01-07-2006, 07:58 AM

I remember Tim's car.......i saw it the first time at a meet down there 3 years ago or something. i was like WTF is that noise.......then i saw the car and i'm like..wow that thing is fast..

84HOtransam · 01-08-2006, 08:27 AM

Quote:

Originally Posted by BigDaddyKane

and how much weight reduction? The only attempt to making a 305 fast is forced induction and/or weight reduction IMHO ... Ive owned all the third gen 305's except CFI, and they all blow.. but to each their own. the LG4 was loud after full exhaust, the L03 was great on gas, and the TPI... well... it was ok.

spare tire out..the car weighed 3460 with me in it...its an L69..

WayFast84 · 01-08-2006, 08:51 AM

wait! what does "quick" mean?? im talking about a number not the actual definition

misterjuice · 01-08-2006, 11:32 AM

Quick is a magically delicious chocolate milk type drink.

NJSPEEDER · 01-08-2006, 11:46 AM

Quote:

Originally Posted by WayFast84

wait! what does "quick" mean?? im talking about a number not the actual definition

to me, quick in a street car is 11's or 10's

enRo · 01-08-2006, 12:18 PM

Quote:

Originally Posted by misterjuice

Quick is a magically delicious chocolate milk type drink.

You kinda got confused with Lucky Charms, mayte. Someone didnt eat their Wheaties this morning

BigAls87Z28 · 01-11-2006, 08:06 AM

quick is 0-60 time. Fast is 11's and 10's.