|
08-19-2004, 12:04 PM
|
#1
|
Join Date: Aug 2004
Location: Lodi, NJ
Posts: 429
|
Just ordered more suspension parts.
I jsut ordered new adjustable LCA's, adjustable Panhard Bar, and front and rear sway bars from Spohn. How hard is this to install? Im assuming the hardest part would be the front swaybar? any tips anyone car give me for changing these parts out? and can all of this be done in one day?
__________________
Chuck
Someone help me fix the rattles in my car Please.
|
|
|
08-19-2004, 01:19 PM
|
#2
|
10 Second Club
Join Date: Aug 2004
Location: Eastampton
Posts: 4,466
|
I would suggest an air ratch for the front sway bar bolts. Mine were stubborn since they were untoughed for 4 years in the NJ weather.
Oh, and use jack stands........safety first
__________________
1999 MBM T/A - the new ride
2004 CE Corvette - 1.410 - 10.246 @ 133.39
2003 Silverado - Lifted 6 on 35s
2000 T/A WS6 - 11.190 @ 119.79...SOLD
|
|
|
08-19-2004, 01:38 PM
|
#3
|
Join Date: Aug 2004
Location: Lodi, NJ
Posts: 429
|
yea i figured an impact wrench to get the bolts off. and a hand ratchet to put the new ones on. oh yes jack stands is a must.
__________________
Chuck
Someone help me fix the rattles in my car Please.
|
|
|
08-19-2004, 03:05 PM
|
#4
|
Lifetime Power Member
Join Date: Jul 2004
Location: London, UK
Posts: 862
|
Quote:
Originally Posted by Jersey_TA
I would suggest an air ratch for the front sway bar bolts. Mine were stubborn since they were untoughed for 4 years in the NJ weather.
Oh, and use jack stands........safety first
|
Yeah, I pulled mine off last winter and it was a bitch they were on there so tight. I had to go and buy new endlinks cause the old ones were corroded so bad.
__________________
2008 Mysterious Solstice GXP - teh hotness!
2002 Pewter V6 Camaro M5 ~ SOLD
mods: Gear, weight reduction, tuning
Fear the Gear. 13.585 @ 100.05 1.827
Beater: 93 Jeep Grand Cherokee
|
|
|
08-19-2004, 03:17 PM
|
#5
|
Join Date: Aug 2004
Location: So Bruns
Posts: 543
|
i just did an adjustable panhard rod and it was EASY. the only problem i had was i didn't have a 1.25" wrench, luckily my dad had one.
it can be a pain when you are adjusting it, because the wheels have to be on the ground. you might be better off with ramps.
__________________
Formerly SilverTransAm
Sold: 1998 Trans Am
SLP Lid, Magnaflow Catback, Stock Hurst w/ JSS, BMR APHR, Chrome ZR1's
Currently Driving: 1986 Oldsmobile Delta 88
Parents bought it from my neighbor's father for $500
|
|
|
08-20-2004, 08:46 PM
|
#6
|
11 second club / Moderator
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
|
spray them with something the night before to loosen them. Then before you wrench them off take a wire brush to the threads of the bolts to get the ruse and all off so your not fighting them the whole way off.
On the fronts they just snapped on me when i took off the swaybar on my old bird.
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
|
|
|
08-20-2004, 11:50 PM
|
#7
|
Join Date: Jul 2004
Location: West Long Branch
Posts: 13,598
|
4 years, and you had problems!!
Try 16 years! But I must say that my dad had them replaced, at some time, with poly-u units. They were still a PITA to get off.
I suggest you get the TDS Wonderbar as it is a great replacement for the stock unit.
__________________
2/20/2013: They Day the ****s Stopped
|
|
|
08-21-2004, 04:45 PM
|
#8
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
i did a complete rear end swap on my back in my garage with all hand tool, wasn't hard at all. I gotta swap out my torque arm again soon, that 88 iroc arm has been there too long and my spohn one is collecting dust waiting for a new driveshaft to go in at the same time. next big thing is dropping the front k member with engine to do the motor swap, but thats after i get a twin post lift in my garage
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|