Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Engine / Power / Tuning

Notices


Reply
 
Thread Tools
Old 12-10-2018, 09:29 AM   #1
TaKid455
 
Join Date: Oct 2008
Posts: 545
iTrader: (1)
Aftermarket ECU reviews - input

Just got back from PRI in Indy. What a great show! Knowledge is power and plently of it was obtained. From basic stuff to next level lemans and Top fuel stuff.

Looking for inputs on aftermarket ECUs. Spoke in depth with many companies (along with shops/ users of some) and would like to hear some other's inputs. Not hearsay , but down in the trenches inputs. Most will all work and do what you need and it seems to come down to software usability unless you have a freak application with a bazillion sensors. Most off these can and will sister with your factory ECU so you can control your drivetrain while the car still does the body.

Ones in considersation:

Haltech
ProEFI
MS3pro
Bosch (Nice but mostlikely not practical due to cost. Their ABS is nice but at 7-8k bill)
Motech (Good but feel Haltech would be the choice between the two)


Yes, you did note that Holley & FItech were not on there.

Lets hear some banter...
TaKid455 is offline   Reply With Quote
Old 12-10-2018, 11:59 AM   #2
wretched73
 
wretched73's Avatar
 
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,438
iTrader: (2)
I'm not familiar with anyone on this board running an aftermarket ECU.

I'd go on LS1tech or yellowbullet and read up there. Plenty of info.

Holley and Mega squirt are probably the most popular choices.
__________________
1983 camaro- Scrap
1988 camaro- Current mistake
DD- '05 Silverado
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1

Quote:
Originally Posted by LS1ow View Post
and once i get PHB, what do i ajust it too?
Quote:
Originally Posted by Jersey Mike View Post
Seven.
wretched73 is offline   Reply With Quote
Old 01-11-2019, 11:57 AM   #3
Pampered-Z
Sliderule / Moderator
 
Pampered-Z's Avatar
 
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,273
iTrader: (1)
This probably isn't going to be much help. Only aftermarkets I played with were on LT1 cars and years ago. Electromotive and Motech.

Programming is very similar, they both worked about the same. And back then, the units differed by what was included and what was an add-on. multiple window switches, additional inputs / output.

I assume you are looking for fuel injection tuning? If not, look at the MDS power grid. My friends that run carb'd roots blowers or Nitris like that system. I have actually never worked with it myself.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada

1) Build it
2) Race it
3) Break it
4) Repeat!!!
Pampered-Z is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Engine / Power / Tuning

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List
















All times are GMT -5. The time now is 03:46 AM.


Powered by vBulletin® Version 3.8.9 Beta 3
Copyright ©2000 - 2019, vBulletin Solutions, Inc.