|
|
06-07-2007, 06:49 AM
|
#51
|
Join Date: Feb 2007
Location: Wrightstown, NJ
Posts: 491
|
+1 for the clean engine bay on Fast92RS. You either don't drive it, or you spend a lot of time under the hood Either way, you got one clean engine bay!
__________________
95 Z28 M6, 383, D1SC, FMIC, ect., ect., 614 RWHP with the stock PCM and pump gas!
98 Formula WS6 M6
Last edited by CALL911; 06-07-2007 at 06:50 AM.
|
|
|
06-07-2007, 11:09 AM
|
#52
|
Sliderule / Moderator
Join Date: Oct 2004
Location: Catawissa PA
Posts: 2,294
|
Quote:
Originally Posted by CALL911
Yeah, they are pretty close (LT1, 383, supercharged). Not sure on what internal motor work you have on yours. Mines pretty much fully forged 8.8:1 CR, AFR heads, a BIG cam, still running on pump gas.
Most people tend to say they should have always gone for the bigger blower. I even considered an F1 instead of my D1SC, but just wanted around 625 RWHP or so, and found I could acheive that easily with the D1SC, so thats where I stayed. I haven't had mine to the track yet with the blower (at least since its been running right). I plan on going next week though, so I should have some track times then.
|
Same here on the internals, all forged. Callies stelth crank and sprayed caps, Lunati rods, SR pistons. I have a small blower cam ( 550 lift ) and ported stock heads, one day the heads will get upgraded too. I actually want to eventually go over the 700HP mark or whatever it takes to go 10.0. I knew the SC wasn't what I wanted, but a friend had only for 3 months and decided to go Nitris and sold it to me for about 1/3 of what he paid.
YOUR CAR IS GOING TO FLY!
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|
|
|
06-07-2007, 11:15 AM
|
#53
|
Join Date: Feb 2007
Location: Wrightstown, NJ
Posts: 491
|
Quote:
Originally Posted by Pampered-Z
Same here on the internals, all forged. Callies stelth crank and sprayed caps, Lunati rods, SR pistons. I have a small blower cam ( 550 lift ) and ported stock heads, one day the heads will get upgraded too. I actually want to eventually go over the 700HP mark or whatever it takes to go 10.0. I knew the SC wasn't what I wanted, but a friend had only for 3 months and decided to go Nitris and sold it to me for about 1/3 of what he paid.
YOUR CAR IS GOING TO FLY!
|
We'll see how it does next Tuesday.
__________________
95 Z28 M6, 383, D1SC, FMIC, ect., ect., 614 RWHP with the stock PCM and pump gas!
98 Formula WS6 M6
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|