|
01-11-2013, 09:37 PM
|
#1
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
Electrical Hardwiring ?
so im kind of in a pinch. Those of you that have a valentine1(early) know it used a phone cable to a power plug that goes into the cigarette lighter. My power plug is lost thus leaving me with a dead radar and 8 ft of phone cable. Does anyone know if i can splice the phone cable(4 smaller wires within) to work with a USB cable(hacked car charger) or can i just tap into the fusebox and hardwire it ? without ordering the hardwire kit from V1? because if i have to wait the time it takes to get the hardwire kit i may as well just get the power plug so i can still switch between cars.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
01-12-2013, 06:33 AM
|
#3
|
11 second club / Moderator
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
|
Gotta be careful, cause the lighter adapter may cit it down from 12 volts.
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57
1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
|
|
|
01-12-2013, 06:40 AM
|
#4
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,151
|
Quote:
Originally Posted by LS1ow
so im kind of in a pinch. Those of you that have a valentine1(early) know it used a phone cable to a power plug that goes into the cigarette lighter. My power plug is lost thus leaving me with a dead radar and 8 ft of phone cable. Does anyone know if i can splice the phone cable(4 smaller wires within) to work with a USB cable(hacked car charger) or can i just tap into the fusebox and hardwire it ? without ordering the hardwire kit from V1? because if i have to wait the time it takes to get the hardwire kit i may as well just get the power plug so i can still switch between cars.
|
USB is not 12v. I'd follow that link and hardwire it. Or get a new cigarette lighter adapter from radio shack and plug it in. http://www.radioshack.com/product/in...ductId=3806057
I have a V1. Worked nice. It's in the garage. I adjusted my driving style, no problems now.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
01-12-2013, 07:35 AM
|
#5
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Usb is 4 pins: 5v power, data pos, data neg, ground. You may be able to convert rj11 to usb if that is what you are asking.
|
|
|
01-12-2013, 07:45 AM
|
#6
|
Power Member/NJFBOA Bookie/Moderator
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
|
Hardwired mine into the fusebox. Grounded one end, ran the other end to either the Gauge, Radio or Accessory fuse. Can't remember.
__________________
1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
|
|
|
|
01-12-2013, 09:28 AM
|
#7
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Kirk hardwired his into the tbss, harass him.
|
|
|
01-12-2013, 02:08 PM
|
#8
|
10 Second Club
Join Date: Feb 2008
Location: Eatontown
Posts: 1,647
|
I just got the direct wire adapter from their website, and installed one in both my camaro and TBSS so I didnt have to use the cigarette adapter cable.
https://store.valentine1.com/store/partsdept.asp
__________________
1999 C5 FRC: 12.7@114
2008 TBSS: 12.48@108
2017 Silverado 2500 do you even lift breh?
|
|
|
01-13-2013, 09:59 AM
|
#9
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Ahh I thought you made one.
|
|
|
01-14-2013, 02:20 PM
|
#10
|
Power Member / trans break does not equal transbrake
Join Date: May 2009
Location: The Meadowlands
Posts: 4,513
|
order the hardwire kit after a few hours of failure.
__________________
99 Z28 - SBE LS1/60e
Motor - 10.84 @ 128 - 1.47 60'
Nitrous - 10.16 @ 132 - 1.40 60"
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|