 |
|
08-28-2016, 04:07 PM
|
#1
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Drivetrain carnage
So took the 71 Camaro we put together to Englishtown today for the "digs". Its pre 1979 1/8th mile drag racing. First two passes we light and sweet just to feel the car out since it was my first time out with it. Third pass i went for all the glory and glorious explosions is what i got. As i hit third the rear grenaded, locked up and broke the ears clean off the u joint...
As far as times are concerned my best run was 8.0 @ 95mph, when i blew up i ran a 8.3 @ 70 mph.
Heres the pics of the damage, the flopping drive shaft didnt do much damage to the floor but it did mess my exhaust up pretty good. Moving foward im not quite sure what i want to do, maybe do a 12 bolt, maybe weld leaf spring mounts on and put the 9in in from the iroc i have... decisions
Here are some pics
This is the 8.5in 10 bolt, the carrier is cracked clean in half on both sides as well as nearly every tooth on the ring and pinion
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock  SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
Last edited by redsoxsstink; 09-03-2016 at 12:45 AM.
|
|
|
|
08-28-2016, 04:28 PM
|
#2
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Damnnnnnnnn that's pretty awesome carnage! Nice 1/8th mile too
|
|
|
|
|
08-28-2016, 05:00 PM
|
#3
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by sweetbmxrider
Damnnnnnnnn that's pretty awesome carnage! Nice 1/8th mile too
|
i was quite suprised to see what i did lol i was expecting maybe to pop it on the launch but not going into third gear.
what does 8.0 equal in the 1/4? mid 12s?
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
|
08-28-2016, 05:19 PM
|
#4
|
|
Power Member/NJFBOA Bookie/Moderator
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
|
I'm not seeing the pics
__________________
1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
|
|
|
|
|
|
08-29-2016, 07:00 AM
|
#5
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
http://www.pro-system.com/calc.html
Yeah I'm seeing mid 12's. I'm sure you weren't getting the best 60 either. That mph is pretty good though.
|
|
|
|
|
08-29-2016, 10:22 AM
|
#6
|
|
11 Second Club
Join Date: Feb 2007
Location: elmer
Posts: 274
|
Welcome to my nightmare
__________________
87 TURBO T-- 02 Z28
|
|
|
|
|
08-29-2016, 11:06 AM
|
#7
|
|
Lord of the rings / 10 Second Club / Meet Coordinator
Join Date: Aug 2004
Location: Millstone Township, NJ
Posts: 6,353
|
All hail the mighty power of the LS!
__________________
97 T/A Ram Air Convt
Forever dyno queen / 777rwhp 662 rwtq @ 17lbs / 10.2 @ 140
'24 Corvette Z06
17 Sierra 2500HD Dmax
81 Turbo TA
|
|
|
|
|
08-29-2016, 12:33 PM
|
#8
|
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
Thankfully the car still went straight.
That's strange, the 8.5" 10 bolts last to bottom tens in G bodies.
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
|
|
08-29-2016, 12:41 PM
|
#9
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by NJ Torque
Thankfully the car still went straight.
That's strange, the 8.5" 10 bolts last to bottom tens in G bodies.
|
yeah, its the rear the g body guys look for right?
i know 2nd gens running 9s on them. a lot of cars with much higher HP then Nick is running. something must have just given up from old age or something.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
08-29-2016, 01:56 PM
|
#10
|
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
Quote:
Originally Posted by BonzoHansen
yeah, its the rear the g body guys look for right?
i know 2nd gens running 9s on them. a lot of cars with much higher HP then Nick is running. something must have just given up from old age or something.
|
Yes. the GN/442's came with the 8.5 rear while the MCSS/GP/others came with the 7.5"
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
|
|
08-29-2016, 02:09 PM
|
#11
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by NJ Torque
Thankfully the car still went straight.
That's strange, the 8.5" 10 bolts last to bottom tens in G bodies.
|
Agreed, not sure what the issue was there with this one but it sure was not happy going down the track lol.
And scott to answer your question over on facebook, the rear he was looking at was a 12 bolt from a Chevelle with the perches welded up to fit a second gen. It is drum to drum, 3.73 posi and a sway bar (which i didnt have before) for $700 so that is what is going in it next. It would have cost me that much or more to rebuild the 10 bolt.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
|
08-29-2016, 02:44 PM
|
#12
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Remember to check pinion angles on that perch job.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
08-29-2016, 03:27 PM
|
#13
|
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,673
|
Quote:
Originally Posted by redsoxsstink
what does 8.0 equal in the 1/4? mid 12s?
|
You would be in the low 12's if you get your 60' down in the 1.9 range.
__________________
John
|
|
|
|
|
08-29-2016, 10:21 PM
|
#14
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by BonzoHansen
Remember to check pinion angles on that perch job.
|
Will be going over that when its in the car. I hope to have it painted and in the car by Wednesday, checking to see if I need to shorten the drive shaft and sending that out for repairs and a new u joint.
Maybe next week back on the road? Chatterbox meet?
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
Last edited by redsoxsstink; 08-29-2016 at 10:24 PM.
|
|
|
|
|
08-29-2016, 10:36 PM
|
#15
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Nice
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
08-30-2016, 07:07 AM
|
#16
|
|
Power Member/NJFBOA Bookie/Moderator
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
|
Quote:
Originally Posted by redsoxsstink
Will be going over that when its in the car. I hope to have it painted and in the car by Wednesday, checking to see if I need to shorten the drive shaft and sending that out for repairs and a new u joint.
Maybe next week back on the road? Chatterbox meet?
|
I love it. Keep thrashing at it, Nick!
__________________
1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
|
|
|
|
|
|
08-30-2016, 07:14 AM
|
#17
|
|
Power Member
Join Date: Sep 2008
Location: Hackettstown, NJ
Posts: 1,632
|
No pics for me, either.
__________________
1998 Z-28 - SLP lid - Ported TB - LS6 Intake - Dynatech SS headers/Catted Y - Magnaflow Exh - 3.42 - Yank SS3600 - UMI weld-in subframe connectors, Adj LCA, Adj PHB, Q1A TA - Bolt-in Relocation Brackets - Strano springs - Koni shocks - 17" C6Z06 wheels - 326HP/335ft-lbs - 12.35 @ 110.41
Quote:
Originally Posted by Blackbirdws6
I can appreciate a dream but this person needed some real friends.
|
|
|
|
|
|
08-30-2016, 08:17 AM
|
#18
|
|
10 Second Club / Meet Coordinator
Join Date: Dec 2004
Location: Roxbury, NJ
Posts: 2,101
|
yea, pics aren't loading today, but I did see them the other day on here. damn, ring gear really got eaten up bad. hope you get it all swapped out without any problems dude. sad to see that you are selling the iroc too though...
__________________
1987 IROC-Z - modified
Last edited by IROCZman15; 08-30-2016 at 08:18 AM.
|
|
|
|
|
08-31-2016, 11:47 PM
|
#19
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Here are some more pics, tore into tonight.
Also found out on the new rear the bolt that keeps the carrier rod in place is snapped.. Is there any remedy for this? Only thing I can think of is drill the rod out because I can't get a drill at the proper angle to drill out the bolt without messing up the carrier.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
|
|
|
|
|
09-01-2016, 08:10 AM
|
#20
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
|
|
09-02-2016, 10:31 AM
|
#21
|
|
Power Member/NJFBOA Bookie/Moderator
Join Date: Jun 2009
Location: North Jersey = Best Jersey.
Posts: 4,435
|
That last pic...  Where ya at on this, Nick? I saw on SnapChat that you got your hands on some paint...
__________________
1995 Firebird... Stock-ish.
Quote:
Originally Posted by LS1ow
Good. He microwaved my phone 6 years ago, i hope his intake erupts.
|
|
|
|
|
|
09-02-2016, 05:24 PM
|
#22
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by Jersey Mike
That last pic... Where ya at on this, Nick? I saw on SnapChat that you got your hands on some paint... |
well none of the above mentioned methods worked for getting that center pin out.. so I had to dremell, which took forever... after finally getting the pin out I realize, oh hey no c clips. so the previous owner use c clip eliminators, great. Now I pulled the carrier out, cleaned all the metal out from the dremell, and started to paint. Let it dry and the then tried to bolt on that nice Moser cover you also saw on snap chat and it doesn't fit. I ordered the cover for a GM 12 bolt passenger car and that is what I got, so I ran the part number of the housing. This is where things get bad.. turns out the housing is GM's "o type" housing which was used in Oldsmobile's for like 2 or 3 years. They have a 12 bolt cover and look like a 12 bolt, but inside are just the 8.5 10 bolts with 28 spline axles, the only benefit is they come with bolt in axles.. So basically I got double ****ed on the rear since he said it was 3.73 but was really 3.23 (there is like no aftermarket support for "o-type" rears) and also said it was a Chevy 12 bolt. Both of which I guess is my fault, either way very annoying. But in the end it will go in the car and I guess a further resolution will be delt with when/if this one blows up too.
Ill be putting it in the car and bring the drive shaft to get repaired monday
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
Last edited by redsoxsstink; 09-02-2016 at 05:42 PM.
|
|
|
|
|
09-02-2016, 10:34 PM
|
#23
|
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
that sucks, i feel bad for you on that one. ugh.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
Last edited by BonzoHansen; 09-02-2016 at 10:34 PM.
|
|
|
|
|
09-02-2016, 10:55 PM
|
#24
|
Join Date: Dec 2009
Location: milltown
Posts: 1,497
|
Quote:
Originally Posted by BonzoHansen
that sucks, i feel bad for you on that one. ugh.
|
thanks, I def learned some 12 bolt wisdom on this one. Hopefully this 8.5in will hold up the way everyone says they should lol. Im just upset I cant use my shiny aluminum Moser cover. Knew it was too good to be true for $700 bucks.
__________________
2002 Camaro Sunset Orange Mettalic, V6, 5spd, bilstein HD shocks and struts, eibach pro lowering kit, eibach f/r sway bars, lakewood PHB, UMI 2 point subframe connectors, energy suspensions poly master bushing kit
daily econobox and first car
1986 IROC-Z, T56, MGW shifter, Heads, Cam, Holley Stealth Ram 350, t-top, tubular LCA with relo brackets, adjustable PHB, belltech sway bars, ground control weight jacks, SLP mid length headers, 3in w/borla XR1, RIP 3 10 bolts, 12.7 @ 109 so far.. atleast its faster than stock SOLD
1971 Camaro LS3/T56/9in, cam only and still carbed, RIP 2 10 bolts, 11.62@121
03 Blazer 2 door - salt sponge
Last edited by redsoxsstink; 09-02-2016 at 10:56 PM.
|
|
|
|
|
09-03-2016, 12:02 AM
|
#25
|
|
^^^Lover of bad cars^^^ Meet Coordinator
Join Date: Aug 2007
Location: Whitehouse Station
Posts: 2,249
|
pics no workie
__________________
1986 Honda VFR750 - 89.3HP to the wheel
2000 Trans Am M6 - Mods: Yes.
2018 Durango R/T - AFE Intake, JLT Catch Can, Stainless Works Catback, Vinyl Dodge Racing Stripes
2003 Toyota Matrix XRS M6 - Lol
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
