Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Electrical and Wiring

Notices


Reply
 
Thread Tools
Old 07-16-2009, 09:32 AM   #1
FESTER
 
FESTER's Avatar
 
Join Date: Mar 2006
Location: HARMONY NJ
Posts: 37
iTrader: (1)
HEADLAMP ISSUE....

Anyone have any headlamp issues with flip up lamps going nuts when the lock and unlock buttons are used on the key fob? key fob only. The lamps just go nuts up and down.

Thanks.
FESTER is offline   Reply With Quote
Old 07-16-2009, 10:31 AM   #2
Stevoone
 
Stevoone's Avatar
 
Join Date: Mar 2007
Location: NJ
Posts: 540
iTrader: (2)
I had a problem with a customer's T/A doing that. He also had a noise from one of the head lamp motors, I remember replacing the stripped motor but I don't remember if that fixed the issue with the key fob.

also found this on LS1tech http://www.ls1tech.com/forums/pontia...eadlights.html
Stevoone is offline   Reply With Quote
Old 07-16-2009, 10:51 AM   #3
btownws6
 
btownws6's Avatar
 
Join Date: May 2009
Location: brick, nj
Posts: 641
iTrader: (1)
mine did that and all i did was replace the motor and it stopped
__________________
2002 Pontiac Trans Am WS6
1989 Pontiac Trans Am GTA
2000 Ford Mustang
btownws6 is offline   Reply With Quote
Old 07-16-2009, 11:16 AM   #4
69BirdX
12 Second Club
 
69BirdX's Avatar
 
Join Date: Nov 2004
Location: Haddon Twp NJ
Posts: 2,213
iTrader: (0)
Mine did it until i smashed the front end and replaced the motors. So unlike me just replace the motors if it bothers you that much. I use to tell people my car just likes winking at me
__________________
www.Ames-Photography.smugmug.com
'98 Trans Am Chameleon..sold
'10 Mazdaspeed3... DD
'04 Pontiac GTO....Sunday Funday Special


Last edited by 69BirdX; 07-16-2009 at 11:17 AM.
69BirdX is offline   Reply With Quote
Old 07-16-2009, 03:23 PM   #5
FESTER
 
FESTER's Avatar
 
Join Date: Mar 2006
Location: HARMONY NJ
Posts: 37
iTrader: (1)
OK... Thanks everybody!
FESTER is offline   Reply With Quote
Old 07-16-2009, 04:04 PM   #6
deadtrend1
11 second club / Moderator
 
deadtrend1's Avatar
 
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
iTrader: (11)
you can do the free fix and flip the gears 180 degrees
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57

1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
deadtrend1 is offline   Reply With Quote
Old 07-16-2009, 08:11 PM   #7
Knipps
 
Knipps's Avatar
 
Join Date: Dec 2005
Location: Boston/North
Posts: 9,214
iTrader: (8)
Quote:
Originally Posted by deadtrend1 View Post
you can do the free fix and flip the gears 180 degrees
gears aren't the motor.
__________________

Quote:
Originally Posted by BonzoHansen View Post
dumbass.
Knipps is offline   Reply With Quote
Old 07-16-2009, 08:40 PM   #8
deadtrend1
11 second club / Moderator
 
deadtrend1's Avatar
 
Join Date: Aug 2004
Location: West Berlin, NJ
Posts: 7,148
iTrader: (11)
Quote:
Originally Posted by Knipps View Post
gears aren't the motor.
Camaro guys ....

the gears stripping is what causes the motor to act crazy when you hit the key fob or turn off your headlights. Usually will make a grinding ray gun sound for a few seconds turning the lights off. And when you hit the fob, the lights go up a little, back down and grind.

You can replace the whole motor with new or from a junkyard Or, just pop the cover off, flip the gear 180* around and epoxy it back together and you will be good for awhile.
__________________
2001 Trans Am WS6 •SLP Loudmouth II •UMI Suspension •12.857 @ 109.57

1996 Trans Am WS6 •Pacesetter Longtubes •Strange 12 Bolt •Spohn Suspension •11.152 @ 123.85
deadtrend1 is offline   Reply With Quote
Old 07-16-2009, 09:25 PM   #9
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
iTrader: (12)
Quote:
Originally Posted by deadtrend1 View Post
Camaro guys ....

the gears stripping is what causes the motor to act crazy when you hit the key fob or turn off your headlights. Usually will make a grinding ray gun sound for a few seconds turning the lights off. And when you hit the fob, the lights go up a little, back down and grind.

You can replace the whole motor with new or from a junkyard Or, just pop the cover off, flip the gear 180* around and epoxy it back together and you will be good for awhile.
i typed out this response, then was like nah not my place
__________________
sweetbmxrider is offline   Reply With Quote
Old 07-22-2009, 02:34 AM   #10
Czop418
 
Czop418's Avatar
 
Join Date: May 2009
Location: Detpford New Jersey
Posts: 204
iTrader: (0)
Yupp our headlights another one of gm's flaws
Czop418 is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Electrical and Wiring


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.