Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Appearance

Notices


Reply
 
Thread Tools
Old 11-29-2013, 03:06 PM   #151
donnj
 
donnj's Avatar
 
Join Date: Jul 2009
Location: North Jersey
Posts: 464
iTrader: (6)
The LT hood and LS hood I have are different I presume. The LT hood I have is flat vs the LS hood I have has curves behind the headlights up towards the cowl, just go easy on test fits. Also I had to trim my LT fenders by the radiator support just behind the first mounting area, it needed to be trimmed.
donnj is offline   Reply With Quote
Old 11-29-2013, 05:31 PM   #152
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Quote:
Originally Posted by donnj View Post
The LT hood and LS hood I have are different I presume. The LT hood I have is flat vs the LS hood I have has curves behind the headlights up towards the cowl, just go easy on test fits. Also I had to trim my LT fenders by the radiator support just behind the first mounting area, it needed to be trimmed.
Trimmed? Do you have any photos of what you had to do? It appears to all swap over with no hassle providing all the brackets and misc. other parts are in place.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"

Last edited by bigz28man; 11-29-2013 at 05:53 PM.
bigz28man is offline   Reply With Quote
Old 11-29-2013, 07:37 PM   #153
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Anyone know where i can pick up a left and right fog light wiring harness? The harness that the Ls fog lights use has a 90* bend to it which won't work with the Lt fog lights.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 11-29-2013, 09:23 PM   #154
V
Stalker
 
V's Avatar
 
Join Date: Aug 2004
Posts: 12,077
iTrader: (12)
i have a 93 z28 with fogs sitting on my trailer waiting to be parted out
V is offline   Reply With Quote
Old 11-30-2013, 06:06 AM   #155
donnj
 
donnj's Avatar
 
Join Date: Jul 2009
Location: North Jersey
Posts: 464
iTrader: (6)
sent you a pm
donnj is offline   Reply With Quote
Old 11-30-2013, 09:35 PM   #156
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Quote:
Originally Posted by V View Post
i have a 93 z28 with fogs sitting on my trailer waiting to be parted out
hey man would love to buy the two fog light wiring harnesses off you. where are you at in NJ? also if you could keep as much wiring as possible that goes to the harness, there is two wires (grey and black) the more wire the better. thankx man
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 11-30-2013, 09:37 PM   #157
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Quote:
Originally Posted by donnj View Post
sent you a pm
hey man I'll give you a ring tomorrow, I'm only held up by the fog light wire harnesses that i need to splice in. the task of converting this front end over has been easy, i hope it stays that way.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 12-03-2013, 08:53 PM   #158
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
hood is on, its looking like a Lt1 more and more

__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 12-06-2013, 12:53 PM   #159
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)

after a couple of hours for some needed rewiring and replacing every bulb all the lights are officially working. I did notice that in the Lt1 if the high beams where turned on the fog lights would turn off leaving the high and low beams on. As for the Ls wiring if the high beams are switched to the on position, the low beams turn off....i guess it will make for even crapper vision while driving at night. HID kit will defiantly be in store for this car.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 12-06-2013, 01:14 PM   #160
PolarBear
Ebearnezer Scrooge/Power Member/Lips
 
PolarBear's Avatar
 
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
iTrader: (16)
Quote:
Originally Posted by bigz28man View Post

after a couple of hours for some needed rewiring and replacing every bulb all the lights are officially working. I did notice that in the Lt1 if the high beams where turned on the fog lights would turn off leaving the high and low beams on. As for the Ls wiring if the high beams are switched to the on position, the low beams turn off....i guess it will make for even crapper vision while driving at night. HID kit will defiantly be in store for this car.
That is the way lighting is standard, fogs usually turn off with the high beams.

Hopefully it will be a "legal" HID replacement?
PolarBear is offline   Reply With Quote
Old 12-06-2013, 03:04 PM   #161
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Quote:
Originally Posted by PolarBear View Post
That is the way lighting is standard, fogs usually turn off with the high beams.

Hopefully it will be a "legal" HID replacement?
I ment i cant run the low and high beams together. When i switch the high beams on the lows shut off. The Lt car allows the high and lows to stay on together while the fog get turned off. As far as "legal" I'd pefer them to be legal
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 12-08-2013, 02:16 AM   #162
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)

was able to get both fenders on, took this photo before i lined everything up
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 12-08-2013, 03:23 PM   #163
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
Coming along quick!
__________________
sweetbmxrider is offline   Reply With Quote
Old 12-26-2013, 06:08 AM   #164
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
some of progress I've made and some of the issues I've had to correct.








I have fixed all the fender alignment issues but one, that being the hood and making sure the lines for the hood are straight. I have to reroute the wiring harness that runs on top of the passenger side strut tower, and the air hose that runs on top of the drivers side strut tower and the hood will be latch completely down.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"

Last edited by bigz28man; 12-28-2013 at 04:57 PM.
bigz28man is offline   Reply With Quote
Old 12-29-2013, 07:41 PM   #165
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
anyone have a good links to the wire mod? I checked on tech which the guy did it on a red trans am. it was helpful but i still run into the driver side that needs to be done as well. I'm thinking about just running two holes on either side of the strut tower and running the hose through there. if anyone has stickys on this please send them my way. thanks guys
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"

Last edited by bigz28man; 12-29-2013 at 07:42 PM.
bigz28man is offline   Reply With Quote
Old 01-31-2014, 05:50 PM   #166
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Can the radiator be lowered at all? The radiator cap is sitting to high, i need about a 1/2" to clear. The hood closes but again the radiator cap is sitting a bit to high?
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 01-31-2014, 07:28 PM   #167
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
HID bulbs in stock housings.. ?
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Old 02-02-2014, 12:20 PM   #168
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Quote:
Originally Posted by LTb1ow View Post
HID bulbs in stock housings.. ?
Nope just factory # bulbs.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 02-02-2014, 12:35 PM   #169
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Fixed the radiator issue but now I've come across this? I have not welded in the corner hood rests so i know thats not the problem.
Attached Images
File Type: jpg 2014-02-01_14-12-36_364.jpg (103.7 KB, 13 views)
File Type: jpg 2014-02-01_14-12-44_838.jpg (97.9 KB, 12 views)
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"

Last edited by bigz28man; 02-02-2014 at 12:38 PM.
bigz28man is offline   Reply With Quote
Old 02-02-2014, 04:02 PM   #170
V
Stalker
 
V's Avatar
 
Join Date: Aug 2004
Posts: 12,077
iTrader: (12)
center latch support frame up too high?
V is offline   Reply With Quote
Old 02-02-2014, 07:37 PM   #171
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Quote:
Originally Posted by V View Post
center latch support frame up too high?
Yeah , I'm going to lower the latch I still have to pull the front corners of the fenders up and bolt the corners down. I just hope that fixes it. I'm guessing I can get a 1/4" down with the latch and a 1/4" up with the fender. That should solve the problem
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"

Last edited by bigz28man; 02-02-2014 at 07:40 PM.
bigz28man is offline   Reply With Quote
Old 02-12-2014, 05:57 PM   #172
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
I got the car back together, this hood is on its way out. I just put up a post about a ss hood I just found. If it's a genuine slp ss hood I'm most likely getting it. The fenders need to be resprayed and I have to get the newly powder coated front wheels back on. The fenders still have room to get moved up, and I still have room to lower the hood latch, which will help with correcting these lines but this hood is on its way out





__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 02-12-2014, 05:59 PM   #173
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
Found a slp ss hood out in Texas for a $1,000.00 looks like that's it.
__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 02-12-2014, 06:37 PM   #174
bigz28man
 
bigz28man's Avatar
 
Join Date: Jun 2011
Location: Manahawkin New Jersey
Posts: 608
iTrader: (1)
I believe I found a hood for this car but got some more work on the car. All I have left to do is tighten up the bolts from the fenders to the front bumper cover and bolt in the fenders to the under brackets under the doors....just waiting on some lift time. Here the car as of today.




__________________
97' Z28, M6 w/ golen engines 396 Lt1, rpm transmission level 6 t56, moser 12 bolt eaton posi w/ 4.11 gears, Hooker super comp long tube headers ory-pipe, slp loudmouth 1 .Full BMR suspension, Bilstein shocks. Torqhead 24x conversion.
02' SS, M6 BMR lowering springs, adj. pan-hard bar, Bilstein shocks. Lt1 front end conversion. Ford 9"
bigz28man is offline   Reply With Quote
Old 02-12-2014, 08:27 PM   #175
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
Too cold to work outside on a personal project, you're strong willed
__________________
sweetbmxrider is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Appearance

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 10:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.