|
Actually you can make an LT1 intake work on an LT4with on stock, unported LT4 heads, with some porting and wlding. But you're are better off getting a LT4 or Edelbrock intake. No way an LT1 intake will work with any type of ported LT4 / AFR / trickflow because the runners are too high and there isn't enough material on the top of the LT1 intake runners to properly seal.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|
