![Reply](http://www.njfboa.org/forums/images/buttons/reply.gif) |
|
06-03-2011, 10:26 AM
|
#51
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
I just click on the pics and they open up in photobucket. not sure what the problem here is.
if you spray por15 you nee a good mask. you'll also need to get everything down to bare metal, then etch it with their stuff.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
06-03-2011, 11:29 AM
|
#52
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Yeah about that whole clicking thing.....
|
|
|
06-03-2011, 01:01 PM
|
#53
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
I was planning on just brushing it, its not a show car so I'm not concerned with it looking like one. As long as it looks clean and keeps the rust away I'll be happy
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
06-03-2011, 01:09 PM
|
#54
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
I think you will find it will peel off painted surfaces
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
06-03-2011, 01:17 PM
|
#55
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
Really? Even after proper prep has been done? I haven't used the stuff too much so I honestly don't know
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
06-03-2011, 01:18 PM
|
#56
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by wretched73
Really? Even after proper prep has been done? I haven't used the stuff too much so I honestly don't know
|
Proper prep means the surface is rough and with a lot of tooth. Otherwise it will peel.
|
|
|
06-03-2011, 01:21 PM
|
#57
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
Quote:
Originally Posted by WildBillyT
Proper prep means the surface is rough and with a lot of tooth. Otherwise it will peel.
|
Thats what I was referring too. Sanding entire surface than following up with POR15's prepping solutions
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
06-03-2011, 01:25 PM
|
#58
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by wretched73
Thats what I was referring too. Sanding entire surface than following up with POR15's prepping solutions
|
which are used on bare metal. not roughed up paint.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
06-03-2011, 01:31 PM
|
#59
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
I had the best success on sandblasted surfaces. On bare smooth metal it won't stick, and on bare metal w/metal ready it was marginal at best.
I stopped using it for the most part and just use rustoleum professional now. I inspect the cars enough that rust won't get away from me.
|
|
|
06-03-2011, 02:30 PM
|
#60
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
I did like the can said and it worked good on my interior.
|
|
|
06-03-2011, 02:43 PM
|
#61
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by sweetbmxrider
I did like the can said and it worked good on my interior.
|
you mean parts you can't see and don't get much if any abuse?
I've used por15 with success many times and will use it again. however I have found it's limitations. that stuff likes bare steel with lots of bite. I also found it gets harder over time. most of the scratches on my LCAs are from the first few weeks of use, they were much harder to scratch after 6 months.
a-arms are pure por15. frame is por, etch primer while the por15 is tacky, rustoleum semigloss black.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
06-03-2011, 02:53 PM
|
#62
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
06-03-2011, 03:17 PM
|
#63
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Quote:
Originally Posted by BonzoHansen
you mean parts you can't see and don't get much if any abuse?
|
I don't have carpet, just a hot black floor. It looks ok for what it is.
|
|
|
06-03-2011, 03:57 PM
|
#64
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
|
Quote:
Originally Posted by sweetbmxrider
I don't have carpet, just a hot black floor. It looks ok for what it is.
|
cool. I was just trying to make the point about abuse it will take. but no carpet it is taking it pretty good!
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
06-03-2011, 04:10 PM
|
#65
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
Yeah prep is definitely key but I agree with what you guys are saying mostly. I'll eventually carpet over it but for now it looks ok.
|
|
|
06-04-2011, 09:22 AM
|
#66
|
Join Date: Sep 2010
Location: egg harbor twp south new jersey.
Posts: 229
|
were did you get that car from?
|
|
|
06-04-2011, 10:29 AM
|
#67
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
I got it from a guy in PA in '07
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
06-05-2011, 08:53 AM
|
#68
|
Join Date: Sep 2010
Location: egg harbor twp south new jersey.
Posts: 229
|
i was curios, i sold my 83 z a few years back. i saw you mentioned the fiberglass on the floorboard, it reminded me of mine. then i looked through your pics and realized it wasnt.
besides the hole, mine was in good shape, new engine, trans i was in the process of getting it ready for paint when **** happened i sold it on ebay for under 900. good luck with the project.
|
|
|
07-09-2011, 01:01 PM
|
#69
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
How goes progress?
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
07-09-2011, 03:39 PM
|
#70
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
Funny you say that, I need some engineering knowledge and some ideas. I want to cut out most of the radiator support along with the upper piece that ties the upper piece that connnects the outsides of the car together. Since I'm going to be utilizing an after market radiator and won't have an a/c condenser there I figure I can fab up something cleaner/simpler. Just looking to see if anyone has any ideas on how to piece it together
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
07-09-2011, 08:23 PM
|
#71
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
Quote:
Originally Posted by wretched73
Funny you say that, I need some engineering knowledge and some ideas. I want to cut out most of the radiator support along with the upper piece that ties the upper piece that connnects the outsides of the car together. Since I'm going to be utilizing an after market radiator and won't have an a/c condenser there I figure I can fab up something cleaner/simpler. Just looking to see if anyone has any ideas on how to piece it together
|
If a third gen is anything like a 4th gen, its pretty easy if you are good with a cutter and welder.
Cut the center out, weld on some flat steel to the old frame then run a bar or square stock across. Pretty popular with guys who do a front mount turbo.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
07-11-2011, 04:36 PM
|
#72
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
Quote:
Originally Posted by LTs1ow
If a third gen is anything like a 4th gen, its pretty easy if you are good with a cutter and welder.
Cut the center out, weld on some flat steel to the old frame then run a bar or square stock across. Pretty popular with guys who do a front mount turbo.
|
Got any pictures handy that you could post up?
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
07-11-2011, 09:08 PM
|
#73
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
You cut the upper rad support, weld plates to the cuts, and then attach a cross piece of your choice.
Look though this thread..
http://www.ls1tech.com/forums/forced...le-here-2.html
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
Last edited by LTb1ow; 07-12-2011 at 04:00 PM.
|
|
|
07-14-2011, 10:31 AM
|
#74
|
Join Date: Nov 2007
Location: Jackson, NJ
Posts: 1,718
|
The idea in my head wasn't just to replace the rad support itself but that whole upper support, when I get a moment I will post up a little sketch of what I want to accomplish. As for updates, just got a tiny welder to borrow from my buddy so I can patch up the firewall from all those nasty holes from the A/C and Heater core and what not up there.
Another thing I want to fabricate is something where the wiper motors go to get more air into my cowl hood. I won't be using wipers so I figured all that space up there could be better utilized and making cutting it up and making room for more air to flow smoothly under the cowl sounds like a good idea
__________________
1983 camaro- Scrap
1988 camaro- Also scrap
'05 Silverado- You guessed it, scrap
1988 TRX 250R- Ported w/ high compression on 110 octane- Out 60' your LT1
Jersey Shore Street Car Takeover (JSSCT) Founder
Quote:
Originally Posted by LS1ow
and once i get PHB, what do i ajust it too?
|
Quote:
Originally Posted by Jersey Mike
Seven.
|
|
|
|
07-14-2011, 10:48 AM
|
#75
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
You should ask baddest434 for pics of his underhood with his air cleaner setup. From the sounds of it, he had something similar to what you wanna do.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|