Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Restorations, Fabrication, Tool and Shop Tech

Notices


Reply
 
Thread Tools
Old 07-05-2013, 07:28 PM   #1
PolarBear
Ebearnezer Scrooge/Power Member/Lips
 
PolarBear's Avatar
 
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
iTrader: (16)
Water separator/drier

I have a small air water separator and then a post filter setup for my air setup, but it is close to the compressor and the iron pipe I have used is only about 2 feet worth. I am planning on putting together a larger setup, but I am not sure how many sections of pipe to use. I was thinking that 3 sections of 4' pipe with a ball valve at the bottom of each section to drain water that has collected, then attach that all to the separator that I have already created. I would have the pipe go up, then down then up then connected to my existing setup.

Is this enough ups and down? Currently I start spraying water after only a few cycles of the compressor I start spraying water either out of my tools, or the nozzle of the media cabinet.
Thought/opinions?
PolarBear is offline   Reply With Quote
Old 07-05-2013, 08:12 PM   #2
Featherburner
 
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,676
iTrader: (1)
This is how I have mine set up and it works very well.
Attached Images
File Type: jpg 3450-06_L_17f636ec.jpg (71.0 KB, 16 views)
__________________
John
Featherburner is offline   Reply With Quote
Old 07-05-2013, 08:18 PM   #3
PolarBear
Ebearnezer Scrooge/Power Member/Lips
 
PolarBear's Avatar
 
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
iTrader: (16)
Essentially that is what I have now, but it isn't enough. After 10 minutes or so I get water, I think because this is right next to the compressor and the air has no time to cool.
PolarBear is offline   Reply With Quote
Old 07-05-2013, 08:25 PM   #4
Featherburner
 
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,676
iTrader: (1)
It's also 90 degrees and 90% humidity, short of a refrigerated drier nothing is going to be 100%.
__________________
John
Featherburner is offline   Reply With Quote
Old 07-05-2013, 09:03 PM   #5
PolarBear
Ebearnezer Scrooge/Power Member/Lips
 
PolarBear's Avatar
 
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
iTrader: (16)
Even during the winter I would pump water after a while. I just need to add some pipe to help cool it better since my stuff is so close to the compressor
PolarBear is offline   Reply With Quote
Old 07-05-2013, 09:10 PM   #6
Featherburner
 
Join Date: Jun 2007
Location: Arm pit of the world... NJ
Posts: 2,676
iTrader: (1)
I have a 3' flexible hose from the compressor to the 1/2" black pipe on the wall and a 10' length of 1/2" to my first "drop". That seems to be long enough to cool the air as that drop is the one I run to my blast cabinet.
__________________
John
Featherburner is offline   Reply With Quote
Old 07-05-2013, 09:44 PM   #7
PolarBear
Ebearnezer Scrooge/Power Member/Lips
 
PolarBear's Avatar
 
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
iTrader: (16)
Ok, so 12 feet plus the extra drier should help considerably
PolarBear is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Restorations, Fabrication, Tool and Shop Tech


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 01:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.