Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Projects

Notices


Reply
 
Thread Tools
Old 03-20-2010, 07:54 PM   #1
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
48 Fordrolet Truck Build Thread....

Ok guys and girls I'm going to keep a running thread of the progress on my new ride as it is built for you to see.

It's a 48 Ford F-1 pickup that I bought for $300 back in December. So far I pulled it all apart, sold the hood and fenders for $200 and my orignal frame for $250 plus the guys original with some holes in it (scrap value will be good on it). I also have the original 3 speed toploader and solid front axle setup to sell off once I clean them up.

Got the truck without a bed and rust free ones are hard to come by. I was going to just build my own but I stumbled upon one on Craigslist from a 48 Chevy. I took some measurements and the dimensions are about right for what I want so I bought it for another $300.

I also found a 5 speed NV3500 trans with a fresh rebuild out of a late 90's truck for $200 and a GM truck crate 350 motor with 10,000 miles on it for $400.

I'm also working with Pete & Jakes who own Superbell on sponsorship for all of the new suspension and brakes front and rear. More details to come on that.

Plan is to chop the truck, build a custom z'd frame, keg gas tank in the bed, ride height about 4" off the ground, '32 Ford front suspension, no hood or fenders, flat black paint, RPM logo's on the doors.

Here's a few pics of it how I got it for those that didn't see last time.




__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-20-2010, 08:02 PM   #2
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
Last weekend two of my buddies came by and we started the chop on the cab. The plan was to take 5" out of the height. I marked out all of my cut lines with masking tape as you can see in the pictures.

Before cutting I decided to remove the entire rear window frame. If I did it with the chop it would have been about 3" after and while it's cool it's not functional...plus the rounded ends would have matched up very off. Plan is to chop the window down to about 6" and then weld the frame back in.

After cutting the back window out we hacked off the tops of the doors to get them out of the way. Then the roof top. We used a sawzall for the thick parts on the posts and a cutoff wheel on the rest for nice clean cuts.

Once the roof was off we removed the 5" sections that I'm taking out....if you ever do this be sure to remove 5 vertical inches on the slanted posts...I've read of guys screwing this up and taking a straight measurement instead.

Because of the taper on the roof of the truck as it drops down we had to quarter the roof panel. We welded each corner on with a few good tack welds and then started using some flat stock to make sure all 4 pieces were close to in line again. Then we began our filler strips for the center gaps. I bought a roof cut out of another truck for cheap which is great for in the window channel area....now I don't have to fab all that.

After cutting down the doors we have to cut the top pieces in half as well because of the taper...I'm using a section of the verticle cut as my filler piece in the middle now.








__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-20-2010, 08:06 PM   #3
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
Those are all the pictures I have for now.....I worked on the cab all day again today but didn't stop to snap any shots.

I finished tacking in all of the filler strips for the roof. Getting the height correct on the driver front quarter piece was a little difficult but it's pretty close. It's definitely going to take some good shaping when I fill the seams to make the front to back transition look right.

I also finished tacking both doors together. I did the front and rear portions and then made my filler pieces for the gap in the middle.

If I get time on monday I plan to chop the rear window and get that all tacked back into place. Then maybe next weekend I can finish all my welds on the cab...probably take a good 2 days to weld it all solid and grind all the welds down.

After that I plan to take a good look at the front and rear cab corners and decide if I want to patch what's there or just replace them with full patch panels. I also have a few small holes to patch elsewhere on the cab.

Then it's off to be blasted to remove all the paint, bondo, and RUST. A good shot of epoxy primer and the bodywork can begin. Stay tuned.......
__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-21-2010, 09:49 AM   #4
B4C
 
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,130
iTrader: (1)
That thing is going to be so cool when its finished!
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
B4C is offline   Reply With Quote
Old 03-21-2010, 10:11 AM   #5
chrisfrom nj
 
chrisfrom nj's Avatar
 
Join Date: Feb 2005
Location: west orange nj
Posts: 2,415
iTrader: (8)
that truck looks great
chrisfrom nj is offline   Reply With Quote
Old 03-21-2010, 10:48 AM   #6
btownws6
 
btownws6's Avatar
 
Join Date: May 2009
Location: brick, nj
Posts: 641
iTrader: (1)
looks awesome
__________________
2002 Pontiac Trans Am WS6
1989 Pontiac Trans Am GTA
2000 Ford Mustang
btownws6 is offline   Reply With Quote
Old 03-21-2010, 12:54 PM   #7
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
i can't believe that thing is salvageable! gunna be a sick truckkkkk
__________________
sweetbmxrider is offline   Reply With Quote
Old 03-21-2010, 02:04 PM   #8
SteveR
I <3 sheep
 
SteveR's Avatar
 
Join Date: Mar 2005
Location: Belmar
Posts: 4,907
iTrader: (1)
Lookin good! Have you thought about maybe building up a flathead for it? A chevy 350 is waaaayyy too common if you're looking for it to stand out.
__________________
Quote:
Originally Posted by Tru2Chevy View Post
Steve has a thing for sheep....
'78 Big Wheel- 2FWFP
SteveR is offline   Reply With Quote
Old 03-21-2010, 08:36 PM   #9
T69SS
 
T69SS's Avatar
 
Join Date: Jan 2010
Location: Shamong, NJ
Posts: 1,358
iTrader: (0)
Very cool!
__________________


1969 Camaro SS - 350 w/ some work done.
2010 F-150
T69SS is offline   Reply With Quote
Old 03-22-2010, 04:52 PM   #10
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
I could have had the original 8BA flathead but honestly I want reliability and power and something I'm familiar with working on....so 350 it is.
__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-22-2010, 06:59 PM   #11
The Fixer
 
The Fixer's Avatar
 
Join Date: Aug 2004
Location: North Jersey
Posts: 3,047
iTrader: (5)
Looks like you guys are off to a great start Paul - keep it up and keep us up to date with the pics!!!!
__________________
Seeya,
Steve R. in North Jersey
'16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car!

Former Toy - '88 Monte SS - had lots of mods...
The Fixer is offline   Reply With Quote
Old 03-22-2010, 09:50 PM   #12
79T/A
 
79T/A's Avatar
 
Join Date: Feb 2007
Location: Wantage, NJ
Posts: 693
iTrader: (0)
Excellent project! It's going to look great without the hood and fenders.
79T/A is offline   Reply With Quote
Old 03-23-2010, 10:20 AM   #13
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
I sure hope so haha. I've come to a sponsorship agreement with Pete & Jake's and will be running their complete front end including brakes, a vega steering setup, clutch/brake pedal setup with master cylinders. I'll also be running their rear suspension setup with Aldean coilovers.

Anyone have an empty keg in good condition??? Need one to make my gas tank out of.
__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-23-2010, 10:36 AM   #14
sweetbmxrider
Meet Coordinator
 
sweetbmxrider's Avatar
 
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,339
iTrader: (12)
actually, i do have a keg. i don't know if its EMPTY empty but pretty close. pm me if you are serious and its yours!
__________________
sweetbmxrider is offline   Reply With Quote
Old 03-23-2010, 11:04 AM   #15
CHRIS67
 
CHRIS67's Avatar
 
Join Date: Jul 2008
Location: Columbia
Posts: 928
iTrader: (0)
Are you going with a rat rod theme?
__________________


Praise the Lowered

67' Camaro - Worked 327, Hotchkis TVS suspension, 4 wheel cross drilled discs, AM radio FTL
05' Silverado - Stock, stock, and stock.
CHRIS67 is offline   Reply With Quote
Old 03-23-2010, 01:35 PM   #16
SteveR
I <3 sheep
 
SteveR's Avatar
 
Join Date: Mar 2005
Location: Belmar
Posts: 4,907
iTrader: (1)
Quote:
Originally Posted by HardcoreZ28 View Post
I sure hope so haha. I've come to a sponsorship agreement with Pete & Jake's and will be running their complete front end including brakes, a vega steering setup, clutch/brake pedal setup with master cylinders. I'll also be running their rear suspension setup with Aldean coilovers.

Anyone have an empty keg in good condition??? Need one to make my gas tank out of.
I know there's at least one company that makes kits to turn kegs into gas tanks to mount in the bed of a pickup. If you can't find one with a quick search, ask over at olskoolrodz.com, they'll know.
__________________
Quote:
Originally Posted by Tru2Chevy View Post
Steve has a thing for sheep....
'78 Big Wheel- 2FWFP
SteveR is offline   Reply With Quote
Old 03-24-2010, 07:00 AM   #17
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
It's going to be more street rod than rat rod. Everything will be "finished" but the color scheme is very much rat rod. It won't look like I raided the local scrap pile and used whatever I could find.

And yeah Steve....Speedway has the filler tops and rollover tubes to convert the kegs into tanks. Just need to find some hold downs as well.
__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-24-2010, 11:39 AM   #18
B4C
 
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,130
iTrader: (1)
Please tell me your going to keep the dash stock I love those gauges/cluster so old school and correct looking in that car.
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
B4C is offline   Reply With Quote
Old 03-24-2010, 12:25 PM   #19
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
Quote:
Originally Posted by B4C View Post
Please tell me your going to keep the dash stock I love those gauges/cluster so old school and correct looking in that car.
Should be stock or close to it.
__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-24-2010, 12:58 PM   #20
WildBillyT
Ayatollah of Rock N Rolla / Admin
 
WildBillyT's Avatar
 
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
iTrader: (10)
Quote:
Originally Posted by HardcoreZ28 View Post
Should be stock or close to it.
Yeah, maybe some vintage SW's to match the others in there (from what it looks like).
WildBillyT is offline   Reply With Quote
Old 03-25-2010, 10:44 AM   #21
B4C
 
Join Date: May 2007
Location: Jim Thorpe PA
Posts: 2,130
iTrader: (1)
Cool man I hate when people build a hot rod or rat rod and then put modern interior/gauges in it they just clash.
__________________
01 SS 383 stroker, Magnum F, 9in.
86 Trans-Am 355 t56
B4C is offline   Reply With Quote
Old 03-26-2010, 07:23 AM   #22
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
Yeah even if I go with new gauges I'll get some vintage lookign ones. I'm also considering customizing the dash with a different old cluster from like a Plymouth or Olds....but we'll see.

I should have some more pics of the cab progress this weekend.
__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-27-2010, 05:34 PM   #23
SteveR
I <3 sheep
 
SteveR's Avatar
 
Join Date: Mar 2005
Location: Belmar
Posts: 4,907
iTrader: (1)
Quote:
Originally Posted by HardcoreZ28 View Post
And yeah Steve....Speedway has the filler tops and rollover tubes to convert the kegs into tanks. Just need to find some hold downs as well.
There's a company that sells all custom fabbed stuff for keg tanks and such including mounts for the bed. I'll see if I can find it again and I'll post a link.
__________________
Quote:
Originally Posted by Tru2Chevy View Post
Steve has a thing for sheep....
'78 Big Wheel- 2FWFP
SteveR is offline   Reply With Quote
Old 03-29-2010, 06:52 PM   #24
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
Ok couple more progress pics on the cab. I got the filler strips tacked in and the back window chopped 2". Back window is almost welded in solid now and half of the front to back filler strip.

I'm a little concerned about the lining up of the roof quarters....it's definitely far from perfect. How far off are you guys normally? As of now it looks like I may have spots that require a quarter inch of bondo or more. I'm highly considering cutting the tack welds on the front where they meet and adjusting them some more.

Last pic is the 350 crate motor I picked up that supposedly has 10,000 miles on it. Going to clean it up and paint it when I get some time.




__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-29-2010, 07:14 PM   #25
LTb1ow
Mongo the Meet Coordinator
 
LTb1ow's Avatar
 
Join Date: May 2008
Posts: 16,892
iTrader: (8)
That is one dusty engine you got there.


Looking good though.
__________________
Quote:
Originally Posted by KirkEvil View Post
repo bigals turd gen and part it out to a loving home
LTb1ow is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Camaros, Firebirds and the People that own them > Member's Projects

Tags
project

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 05:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.