|
03-01-2011, 06:18 PM
|
#1
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
Okay....So whats the difference Vette Damper vrs. Camaro Damper?
Yup....Mr. Know-it-all doesn't know the answer for this one. Anyone care to fill me in?
I do know that the hub on the vette damper is consiberally shorter than the camaro damper... Is the vette crank snout longer? As far as I knew all the cranks where pretty much the same in length, just differences in the webs & drilling and such.
p.s. Yes.... talking about LS1's here !!! 97-04 models
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
03-01-2011, 06:23 PM
|
#2
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,900
|
Pretty sure its the length, the vette runs different distances for the asc belt.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
03-01-2011, 06:58 PM
|
#3
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
I am pretty sure its the distance the belts sit away from the motor, on the vette all the accessories are tucked up closer to the motor,
at least thats what i recall from when i bought my crate ZO6 LS6 for my SS and had to remove the vette balancer and install and F body one.
Last edited by V; 03-01-2011 at 07:01 PM.
|
|
|
03-01-2011, 07:38 PM
|
#4
|
Join Date: Jul 2009
Location: barnegat nj
Posts: 1,340
|
Quote:
Originally Posted by LTs1ow
Pretty sure its the length, the vette runs different distances for the asc belt.
|
Vettes must use a different front cover than, I compared the the vette balancer I have vrs. fbody one, and if I was to press the vette one on all the way it would bury it into the cover and rub. wonder if the vette has a stopper/collar that goes in front of the oil pump to keep this from happening.
ahhhh.... who knows, all that matters is that this brand new sfi vette damper does no good for me. (good thing I got a deal on it !!! lol)
__________________
Quote:
Originally Posted by SRGN
I never pulled into the staging beams at the track and saw a dyno in the other lane.
|
South Jersey Racecraft
|
|
|
03-01-2011, 07:51 PM
|
#5
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
Quote:
Originally Posted by S.J.SLEEPER
wonder if the vette has a stopper/collar that goes in front of the oil pump to keep this from happening.
|
nah, it can't have anything like that, i put an Fbody balancer on my crate LS6, no issues with any collar/stopper. plus the covers all looked exactly the same.
not my pic but...
here you can see how far the fbody balancer sits away from the cover
and finally, this is how much an f body balancer can move back before it hits the front cover...
Last edited by V; 03-01-2011 at 08:00 PM.
|
|
|
03-01-2011, 08:05 PM
|
#6
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
notice here where the belt rides on the water pump pulley... towards the outer edge...
and here on the ZO6 crate engine, notice where the balancer lines up on the water pump, all the way to the inside....
|
|
|
03-02-2011, 02:02 AM
|
#7
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Quote:
Originally Posted by V
|
Who makes that balancer?
|
|
|
03-02-2011, 07:09 AM
|
#8
|
Admin.
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,151
|
looks like it says fluidampr right on it.
__________________
Vent Windows Forever!
The looser the waistband, the deeper the quicksand. Or so I have read.
Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.
Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
|
|
|
03-02-2011, 07:33 AM
|
#9
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
yup fluidampr, that was my second one(3rd overall on that motor)...
this is how my 1st one, had new GM bolt, ended up after leaving my car at the 1000' mark at island...
and the damage it did... (it also dented the water pump pulley so thats why i went to an electric one)...
...k member bent up on corner...
tire rod bent...
and this was my 1st balancer... do not trust professional products....
|
|
|
03-02-2011, 10:03 AM
|
#10
|
Ebearnezer Scrooge/Power Member/Lips
Join Date: May 2006
Location: Hamilton, Mercer county
Posts: 4,141
|
Quote:
Originally Posted by BonzoHansen
looks like it says fluidampr right on it.
|
Thanks, I thought so but I am not familiar with the logo.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|