'95 fullsize bronco project, $3k , alotta new parts

[V]

I just dont have the time or desire for this project anymore. It needs to be put together but itll be nice done. $3000 obo.
1995 Eddie bauer Bronco rolling chassis with the following...(not in truck/installed)...

351w with ~8k miles on rebuild. NEW head gaskets, NEW edelbrock intake manifold, NEW holley 650 carb, NEW chrome oil pan for 4x4, NEW chrome valve covers, NEW timing cover, NEW gaskets, (NEEDS water pump and distributor)
C6 automatic Trans
NEW C6 shifter cable from ford for column shift
NEW C6 shifter cable trans mount brackets
manual shift transfer case
stock electric shift transfer case
stock driveshafts
92-96 F series headlight harness
Stand alone hot-rod wiring harness, 90% wired to factory vehicle
NEW front shock towers and NEW front lower shock brackets
NEW Fenders
NEW Hood
NEW grille
NEW headlights and marker lights
NEW front lower metal valance
6" pro-comp rear lift springs(installed on a previous vehicle but never driven on)
Skyjacker 8" front lift kit(minus 1 radius arm drop bracket and coil springs)(installed on a previous vehicle but never driven on)
NEW Skyjacker stainless steel braided extended brake lines
NEW windshield
NEW ford heater-a/c adjustment cable

Interior needs cleaning BIGTIME, was a fire vehicle, and needs carpeting and a headliner. All replacement interior trim pieces are included. dash has been replaced, along with firewall pad and all a/c-heater boxes. Truck also needs an exhaust system for the most parts(i have stock 351 manifolds and bronco stock cat back system)

No rust on body, minor bubbling starting on the rear wheel well but nothing broke through the paint yet. This is a very solid truck.
CLEAN NJ TITLE.

Once completed and fitted with larger tires(plans were for 38.5"), this truck will be a serious off-roader. Email me with questions etc, you are welcoem to see the truck anytime, just let me know when.