 |
08-17-2010, 06:30 PM
|
#1
|
Join Date: Apr 2010
Location: Browns Mills
Posts: 110
|
Engine good(reliable) for nitrous?
N2O:
100-150 shot of nitrous wet sys.
Eng:
What would have to be done to a stock LS1? (to be reliable and not have to worry about damage?
Would this engine be good?
Or should I look into getting forged internals?
Looking at not so much a daily driver but every other day and only sprayed every once in awhile. If I go stock LS1 I will be upgrading the basics ie no machine work req.
Any help/advice is appreciated.
__________________
1987 Trans Am 5.0 (project status)
|
|
|
|
08-17-2010, 06:36 PM
|
#2
|
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
why bother? stick a cam in it and go single digits!
seriously though just a good tune, colder plugs, and some timing pulled along with the basic nitrous necessities (window/wot switch, fpss switch, etc.) and you can rock that no problem. i'd look into the nitrous outlet's plate systems too.
|
|
|
|
|
08-17-2010, 06:39 PM
|
#3
|
Join Date: Dec 2004
Location: Browns Mills NJ/ Rotondo West FL
Posts: 3,054
|
Stay w/ the 100 shot..throw that on a bolt on car and you'll have a runner.
__________________
AI HCR 241's , Lunati 223/236 .615/.626 114+2 , Full Exhaust , Ported Fast 92 , Ported LS2 TB , Veraram , 85mm MAF , Circle D 4000 , 3.42's , GTP 36# , CSP Dyno tune. More on the way
420 HP/367 TQ on a Unlocked Converter & still climbing.
|
|
|
|
|
08-17-2010, 09:19 PM
|
#4
|
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
Stand alone fuel system with 116 or higher in it, and spray a 200 shot.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
|
|
08-18-2010, 05:55 AM
|
#5
|
|
Guest
|
You'll be fine with a 150 shot on a stock bottom end. Just make sure it's setup right
|
|
|
|
|
08-20-2010, 07:46 AM
|
#6
|
Join Date: Aug 2005
Location: Blackwood, NJ
Posts: 2,295
|
Walbro 255 fuel pump and a tune with some colder plugs.
__________________
Jeff
2002 WS6 T/A.. M6..Built 383 TMR tune..461rwhp,458rwtq
2009 G8 GT. Bone stock 13.6@103.. Vararam Intake, GXP Axlebacks, LS2 FRC's
1998 Corvette Convertible, Vararam Intake+Power Duct, Fast 90/90, Ti Axleback..12.8@110
2003 Cobra Convertible 10th Anniversary
http://www.fquick.com/slow-v6
Local car cruise schedule..
http://www.cliffscalendar.com/
|
|
|
|
|
08-20-2010, 08:47 AM
|
#7
|
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by Iceman_TA
N2O:
100-150 shot of nitrous wet sys.
Eng:
What would have to be done to a stock LS1? (to be reliable and not have to worry about damage?
Would this engine be good?
Or should I look into getting forged internals?
Looking at not so much a daily driver but every other day and only sprayed every once in awhile. If I go stock LS1 I will be upgrading the basics ie no machine work req.
Any help/advice is appreciated. |
That engine has hyper pistons. People spray on them all the time, but they are less forgiving than forged slugs.
|
|
|
|
|
08-20-2010, 10:36 AM
|
#8
|
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
Wait, I'm a little confued... your asking about spraying a stock LS1 and you posted a GENI smallblock stroker?
a STOCK LS1? I would do colder plugs, for a 150 shot to be safe, I would go TR7's or a non projected tip plug, A tune or something like a Timing Tuner or Lingenfelter Launch controller to aid with timing so you can run normal timing the rest of the time. Fuel pump, and send it.
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
