|
05-28-2006, 02:25 PM
|
#1
|
13 Second Club
Join Date: Oct 2004
Location: Netcong, NJ
Posts: 5,799
|
Retarded Right Turn Signal
Yes yes, I replaced the socket 2 times already and my bulb still jumps out. First time I replaced the socket was because I melted them with blue Xenons ... second time, the bulb would just slip out on a little bump in the road, so I switched out the harness again. Now, its doing it all over again. Reminded I did replace the turn bulb everytime I changed the socket so Im clueless as to WTF is going on. I am using 3157 bulbs, and its not electrical cuz when I pull the bulb socket out of the front clear-corners, the bulb drops into it (which is why im fed up cuz i have to remove the headlight to get the bulb out) Any help or suggestions? Thanks.
__________________
2019 Toyota Tacoma TRD Pro ... M6, Voodoo Blue Fun Machine
1987 Pontiac Trans Am ... 305 TPI, T5, Project Car
|
|
|
05-28-2006, 03:13 PM
|
#2
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,684
|
my only suggestion is taking out the whole assembly and taking the bulb and playing around with it until you figure out why its loose
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
05-28-2006, 04:32 PM
|
#3
|
Banned Camp Director Emeritus
Join Date: Aug 2004
Location: Somerset County
Posts: 8,395
|
find a way to tape the bulb into the socket?
__________________
Quote:
Originally Posted by baddest434
and 1 more smart ass answer by you and i'm going to reach into this monitor and grab you by the throat
|
|
|
|
05-28-2006, 06:12 PM
|
#4
|
13 Second Club
Join Date: Oct 2004
Location: Netcong, NJ
Posts: 5,799
|
Mmmkay, I replaced the bulb yet again and drove around the block using the proper signal at the proper time. I pulled in my driveway, only to look inside the clearcorners to find that the glass blew right off the bulb I put in my spare blue Eurolite Xenons and they are working A-OK right now.
__________________
2019 Toyota Tacoma TRD Pro ... M6, Voodoo Blue Fun Machine
1987 Pontiac Trans Am ... 305 TPI, T5, Project Car
|
|
|
06-03-2006, 07:13 PM
|
#5
|
13 Second Club
Join Date: Oct 2004
Location: Netcong, NJ
Posts: 5,799
|
Back to square one. I need to replace the socket yet again, and the bulb blew out.
__________________
2019 Toyota Tacoma TRD Pro ... M6, Voodoo Blue Fun Machine
1987 Pontiac Trans Am ... 305 TPI, T5, Project Car
|
|
|
06-03-2006, 07:19 PM
|
#6
|
MIR
Join Date: Jul 2005
Posts: 9,692
|
sledgehammer will fix it... just pound it in place
|
|
|
06-03-2006, 11:21 PM
|
#7
|
13 Second Club / Moderator
Join Date: Jan 2005
Location: Franklin Lakes, NJ
Posts: 8,684
|
give us some pics man
__________________
Quote:
Originally Posted by LS1ow
Except Jersey mike, great kid, but the way he looks at me makes me feel like im in danger
|
|
|
|
06-03-2006, 11:41 PM
|
#8
|
Stalker
Join Date: Aug 2004
Posts: 12,077
|
good quality clears, stock bulbs, and !DRLs worked for me. i only replaced the one socket once, and bulbs like every week. mainly due to water leaking into the 2 sets of junk clears i first had.
|
|
|
06-03-2006, 11:50 PM
|
#9
|
13 Second Club
Join Date: Oct 2004
Location: Netcong, NJ
Posts: 5,799
|
I guess I should try re-sealing that clear corner ... that could be the problem. The blue ones lasted alot longer.
__________________
2019 Toyota Tacoma TRD Pro ... M6, Voodoo Blue Fun Machine
1987 Pontiac Trans Am ... 305 TPI, T5, Project Car
|
|
|
06-04-2006, 09:41 PM
|
#10
|
13 Second Club
Join Date: Oct 2004
Location: Netcong, NJ
Posts: 5,799
|
I have a pretty big break in the seal for the clear corner. This is my chance to get the smoked style lenses. Thanks for the help ppl
__________________
2019 Toyota Tacoma TRD Pro ... M6, Voodoo Blue Fun Machine
1987 Pontiac Trans Am ... 305 TPI, T5, Project Car
|
|
|
06-05-2006, 03:53 PM
|
#11
|
Join Date: Oct 2005
Location: Old Bridge Twp., NJ
Posts: 235
|
I know exactly how it feels when you drop the stupid bulb into the lens man. I tried hooking up a amber LED bulb in mine and it didn't work and fell right into the lens. And me and my friends had such a freakin hard time putting the lenses in it's not even worth taking it out for the bulb... I'd go for the smoked lenses man...
__________________
'00 Z/28 - *SOLD* 383 Stroker, H/C, Full Boltons
'06 GSX1300R - Full Yoshi TRS Exhaust, PC3, TRE, 17/42 Setup, Sm Airbox Mod, R6 Throttle
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|