Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Restorations, Fabrication, Tool and Shop Tech

Notices


Reply
 
Thread Tools
Old 03-06-2009, 05:53 AM   #1
camaros_4life34
 
camaros_4life34's Avatar
 
Join Date: Jan 2007
Location: kingsville ohio
Posts: 82
iTrader: (0)
Floor Pans

Anyone know where i can get floor pans for a good price? I went out to my car yesterday n cleaned it up a lil bit since the weather is starting to get a lil nicer in my area, and i took a look under the car. The floor pan on the drivers side has 3 small holes developing on the drivers side. I would just patch them but theyve been patched b4 by my father who had originally built the car. So im just goin to get new ones. ............ Thanx in advance allen
__________________
EARZ34
camaros_4life34 is offline   Reply With Quote
Old 03-06-2009, 06:18 AM   #2
CHRIS67
 
CHRIS67's Avatar
 
Join Date: Jul 2008
Location: Columbia
Posts: 928
iTrader: (0)
Year one should have anything you need.

http://www.yearone.com/
__________________


Praise the Lowered

67' Camaro - Worked 327, Hotchkis TVS suspension, 4 wheel cross drilled discs, AM radio FTL
05' Silverado - Stock, stock, and stock.
CHRIS67 is offline   Reply With Quote
Old 03-06-2009, 07:54 AM   #3
JL8Jeff
Hippy Mod, Bergermeister Meisterberger, Moderator
 
JL8Jeff's Avatar
 
Join Date: Aug 2004
Location: Ewing
Posts: 6,212
iTrader: (3)
What year car are you referring to?
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
JL8Jeff is offline   Reply With Quote
Old 03-06-2009, 10:09 AM   #4
HardcoreZ28
 
HardcoreZ28's Avatar
 
Join Date: Aug 2004
Location: Hillsborough, NJ
Posts: 2,630
iTrader: (1)
If it's the thirdgen in your sig you can also try Hawks...they are cheaper than Year One for the same parts. However if they are small holes I would suggest patching them again instead of disturbing the whole floor pan and possibly the geometry on a unibody car.
__________________
--==RPM Resto & Custom==--

1989 IROC-Z Media Coverage:
Chevy High Performance - Readers Rides 4/03
GM High Tech Performance - Tech Article 3/06
Chevy Rumble - Tech & Feature Articles November 2006
Auto Restorer Magazine - Feature Article 5/11
SkinAndSteel.com
HardcoreZ28 is offline   Reply With Quote
Old 03-06-2009, 11:22 PM   #5
camaros_4life34
 
camaros_4life34's Avatar
 
Join Date: Jan 2007
Location: kingsville ohio
Posts: 82
iTrader: (0)
Quote:
Originally Posted by JL8Jeff View Post
What year car are you referring to?

its an 82 third gen
__________________
EARZ34
camaros_4life34 is offline   Reply With Quote
Old 03-07-2009, 09:28 AM   #6
JL8Jeff
Hippy Mod, Bergermeister Meisterberger, Moderator
 
JL8Jeff's Avatar
 
Join Date: Aug 2004
Location: Ewing
Posts: 6,212
iTrader: (3)
How bad are the holes? If you can avoid removing the pan, that's the best fix. Just try patching the area if it's weak. Removing floor pans will affect the strength of the car so it needs to be put up properly and a lot of time guys will weld in reinforcing bars to help hold the body from flexing.
__________________
69 Z28 JL8 4 wheel disc brakes - being restored
09 Silverado Z71
JL8Jeff is offline   Reply With Quote
Old 03-17-2009, 01:57 PM   #7
SteveO_87TA_NJ
 
Join Date: Mar 2009
Location: Bayville, NJ
Posts: 53
iTrader: (0)
I agree with JL8Jeff...

Fix the holes first...if all else fails, then do the pan.

SteveO
SteveO_87TA_NJ is offline   Reply With Quote
Reply

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Tech Forums > Restorations, Fabrication, Tool and Shop Tech

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 05:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.