Today's Posts Mark Forums Read Calendar
Go Back   NJFBOA - Home of New Jersey's Camaros and Firebirds > Event Forums > NJFBOA Events > East Coast F-Body Nationals > 2008 East Coast F-Body Nationals

Notices


 
 
Thread Tools
Old 07-15-2008, 09:52 PM   #1
BonzoHansen
Admin.
 
BonzoHansen's Avatar
 
Join Date: Aug 2005
Location: Hamilton, NJ
Posts: 20,149
iTrader: (27)
2008 East Coast F-Body Nationals - Heads-Up Racing Classes

Revised Heads Up Rules Classes & Rules

In an effort to have more cars in the classes and even the playing field for those wanting to run heads up we are revising the rules:

Changes:
• Base Weights and engine limitations are being removed and breakouts are being added so racers can gauge what classes they will be able to compete in.
• Pure Street/Hot Street N/A are now combined in Pure Street
• Changes are noted below

Pricing & Payouts for all Heads Up classes are follows:
• $50 buy in
• $25 buy back. If you loose first round you can pay $25 and buy back into the race, Those that elect to buy back will be paired up (Random Pairing) and run off ( if odd car count bye is based on 1st round R/T). Winners go into the second round and go on the ladder based on their first round ET. Buy back losers are out!
• Payouts are current set at $250 per class. Payout will be raised base on a car count per class if possible. Additional awards may be offered based on Sponsor’s generosity.

General Rules for All Heads-Up Classes:
• All East Coast Nat Heads-Up Racing participants must meet NHRA safety requirements for the ET and trap speed they run.
• All Heads-Up racing categories will be on a .400 Pro Tree
• NEW ** Each class now has a set breakout **
• Eliminations in all classes will be through an ET ladder matching quickest against slowest in qualifying. ( Pro Ladder )
• All vehicles must have Camaro or Firebird bodies to be eligible for competition.

Pure Street: ** 12.0 Break out ** ---------------------------------------
Class Outline:
• All cars must have current registration, inspection, and insurance
• Functioning street running gear required (headlights, turn signals, brake lights, horn, windshield wipers)
• "Full Interior" required (factory appearing dash, two front automotive seats large enough to seat an adult, console if factory equipped, full interior plastics/trim, carpet, and headliner)
• All cars in Pure Street will launch from a foot brake. No electronics, trans brakes, two steps, throttle stop etc allowed.

Tire Requirements: Drive tire sizes are limited to the following:
• Any width DOT non-drag radial. No DOT slicks permitted
• Drag Radial: 275/50-15, 255/50-16, 235/60-15, 255/60-15
• DOT Slick: Max. height of 26 inches with a max. width of 9.5 inches
• All tires must have size clearly stamped by the factory on the sidewall
• Any front tire is acceptable

Exhaust Requirements: Are also being left very simple, if it was sold, marketed, or installed as a noise reduction device in your exhaust, it is a muffler. This allows for all loudmouth, bullet muffler, single chamber, and straight through style mufflers to be used in this class. NO OPEN CUT OUTS!

Interior Requirements: Our consideration of a "full interior" is pretty straight forward. Two front seats, they don't have to match but they should both be automotive type seats large enough for an adult to sit in, complete factory appearing dash, full carpet/interior panels (including some sort of door panels), and a console if factory equipped (first and second gens may remove the console since it was factory available that way, but the area must be carpeted)

Chassis Requirements:
• Stock style suspension required. Modification or relocation of chassis side suspension mounting points prohibited.
• Welded in subframe connectors are acceptable
• Wheelie Bars prohibited

Drivetrain Requirements:
• Transmissions limited to factory style automatic and manual transmissions.
• Lenco, clutchless shift manual, and planetary style transmissions prohibited.
• All electronics prohibited, no 2-step, transbrakes, delay box etc.
• ** foot brake launch only**.

Hot Street Power Adder Heads-Up: ** 10.0 Break out ** -------------------------
Class Outline: This class is for those who have progressed a bit further into the build up of their car as a race vehicle. While still keeping the chassis limited to bolt on type suspension components, the addition of power adders to the class will make for much quicker ET's than you will see in the Hot Street N/A Class.

Tire Requirements: Drive tire sizes are limited to the following:
• Drag Radial: Any Size DOT Approved Radial Tire Permitted
• DOT Slick: Limited to 11.5 width
• Full Slick: limited to 10.5 width(non-W)
• Any front tire is acceptable
• Drive tires must have factory size stamped on sidewall to be class legal

Exhaust Requirements: Any system to guide exhaust gases away from the engine is acceptable.

Interior Requirements: Interior components may be altered or removed as deemed necessary by car owner. Interior must be neat and safe, free of loose wires or parts.

Chassis Requirements:
• Stock style suspension required. Modification or relocation of chassis side suspension mounting points prohibited.
• Welded in subframe connectors are acceptable.
• Wheelie Bars prohibited

Drivetrain Requirements:
• Transmissions limited to factory style automatic and manual transmissions.
• Lenco, clutchless shift manual, and planetary style transmissions prohibited.
• ** NEW ** No trans break, , delay box/Biondo, throttle stops, boost controller all prohibited ****
• ** NEW ** 2 step allowed **

Power Adders:
• Nitrous: Single Stage Systems acceptable. Fogger, direct port, and plate systems acceptable
• Super Charger: Single belt driven super charger only. Single Inner or After cooler only.
• Turbo Charger: Single Turbo Only. Max inlet 76mm. Single Inner or After cooler only.

Outlaw Heads-Up: **8.5 Break out ** -------------------------
Class Outline: This is the class for the big guns. If you can hang with the "anything goes" crowd, this is the class for you.

Tire Requirements: If you can fit it you can run it

Exhaust Requirements: Anything goes

Interior Requirements: Anything goes

Chassis Requirements:
• Stock style suspension required. Modification or relocation of chassis side suspension mounting points prohibited.
• Welded in subframe connectors are acceptable
• Wheelie Bars acceptable

Drivetrain Requirements:
• Any style of automatic or manual transmission acceptable
• Any Electronics allowed

Engine Requirements:
• No displacement limit
• Single and Multiple Carb set ups allowed
• All factory and aftermarket EFI systems acceptable

Power Adders: As much of any one type of power adders as you can put in and keep your car together.
__________________
Vent Windows Forever!

The looser the waistband, the deeper the quicksand. Or so I have read.

Feather-light suspension, Konis just couldn't hold. I'm so glad I took a look inside your showroom doors.

Hey everybody, it's good to have you on the Baba-too-da-ba-too-ba-ba-buh-doo-ga-ga-bop-a-dop
BonzoHansen is offline  
 

  NJFBOA - Home of New Jersey's Camaros and Firebirds > Event Forums > NJFBOA Events > East Coast F-Body Nationals > 2008 East Coast F-Body Nationals

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Sponsor List














All times are GMT -5. The time now is 08:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.