Quote:
Originally Posted by Kid Racer
isnt the vats in the key...
|
Yes and no. There are three items to a vats system. The chip or resistor in the key, the vats module and the prom in the ecu. The key sends a singnal to the vats module, if its the right key then the vats module sends a signal to the ecu to allow the car to start. If all that is removed then you can get a new ignition key cylinder and key for a non vats car and install it in exsisting column or just swap out the entire column, buts if you want to get rid of the air bag as well.