|
|
05-19-2009, 09:50 AM
|
#1
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
Suspension question(drag launch)
whats the difference between the suspension on 93-97 cars to 98-02 cars? im talking strut and shock wise...everywhere i look, eibach only offers drag launch for 93-97
|
|
|
05-19-2009, 10:04 AM
|
#2
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
As far as I know most of the parts are the same. I know that spring rates are different due to the LT1 being heavier. That is probably why they list it as 93-97.
|
|
|
05-19-2009, 10:13 AM
|
#3
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
how much less does the ls1 weigh compared to the lt1? cant be more than 100lbs...
|
|
|
05-19-2009, 10:14 AM
|
#4
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
i believe the consensus is that the eibach drag springs are junk........."decent" on the track, but completely useless on the street, i actually got that directly from an eibach tech support guy.
i have had my best results with stock rear springs and upgraded shocks, and if you want the lower look, take out the rear isolator
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
05-19-2009, 10:15 AM
|
#5
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
For the 1996 LT1 and 1996 LT4:
LT1 Mass: 785.3 lbs (356.2 kg)
LT4 Mass: 1003.5 lbs (455.2 kg)
For the 2001 LS1 and 2001 LS6:
LS1 Total Dressed Engine Weight: Auto. - 457.6 lbs. (208 kg); Manual - 497.2 lbs (226 kg)
LS6 Total Dressed Engine Weight: (Manual only) - 497.2 lbs (226 kg)
Edit: I don't like those numbers, but bascially a 100* difference LT1/LS1
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
Last edited by LTb1ow; 05-19-2009 at 10:19 AM.
|
|
|
05-19-2009, 10:17 AM
|
#6
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
holy crap, snm those are just engine and trans weights for the ltX's?
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
05-19-2009, 10:20 AM
|
#7
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
cbrmike...ive ran eibach before and the do suck..im looking for a single rate drag spring...any suggestions?
shownomercy....wow what a difference..
|
|
|
05-19-2009, 10:20 AM
|
#8
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
Eh, I am not sure, I just did a quick search. The LT4 weight is with the ZF tranny from the vette so its heavier than a T56/A4.
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
05-19-2009, 10:21 AM
|
#9
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
still...didnt realize the lt1 was so porky.
|
|
|
05-19-2009, 10:23 AM
|
#10
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
Quote:
Originally Posted by MIKES NOTCH
still...didnt realize the lt1 was so porky.
|
iron block vs aluminum, and apparently some accessories are heavier, because thats a major difference
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
05-19-2009, 10:24 AM
|
#11
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
Iron block compared to an aluminum block, should be a huge difference...
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
05-19-2009, 10:26 AM
|
#12
|
BadMod
Join Date: Aug 2004
Location: hamilton, nj
Posts: 8,889
|
Quote:
Originally Posted by MIKES NOTCH
cbrmike...ive ran eibach before and the do suck..im looking for a single rate drag spring...any suggestions?..
|
i spent a bunch of time looking for the same info on ls1tech's drag section, and from what i can find, people either stick with stock springs, or switch to oem v6 springs.......or spend the big bucks and do the rear coil over conversion. but there are quite a few very fast cars on oem rear springs.
the tq arm angle, lca angle and tires have a LOT bigger affect on 60' than a spring swap.
__________________
So much stupid, so little time.
Quote:
Originally Posted by 79CamaroDiva
It started before I drove your car. I just have to look at it the wrong way and your car poops parts.
|
Mercerville MotorSports, LLC
|
|
|
05-19-2009, 10:26 AM
|
#13
|
Ayatollah of Rock N Rolla / Admin
Join Date: Mar 2006
Location: Parts Unknown
Posts: 12,573
|
Quote:
Originally Posted by MIKES NOTCH
still...didnt realize the lt1 was so porky.
|
It isn't. I was looking that stuff up and saw that same page he was looking at. Those have to be fully dressed w/the trans or something. A fully dressed big block with iron heads and an aluminum intake is around 650 lbs.
|
|
|
05-19-2009, 10:27 AM
|
#14
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
yea, guess i underestimated ALOT.
|
|
|
05-19-2009, 10:27 AM
|
#15
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
Don't you want the rear to plant the tires not squat?
Wouldn't V6 springs make it squat more?
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
05-19-2009, 10:33 AM
|
#16
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
the fronts are coilovers
i believe the v6 springs allow the body to pull up thus pushing the rear harder into the ground. i was reading a little into it last night so don't hold me to it. i hear adjustable qa1's all around with stock springs works well. also, like mike said, correctly setting up the rear geometry and a good tire helps the best.
|
|
|
05-19-2009, 10:33 AM
|
#17
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
u wanna get the front up and the back end planted..a softer spring in the fron would help the car transfer the weight to the back but u also need a strut to keep the front end up. too bad they dont make lakewood struts and shocks for these cars. all i can seem to find are adjustables...i have no knowledge on them
|
|
|
05-19-2009, 11:09 AM
|
#18
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
|
|
|
05-19-2009, 11:12 AM
|
#19
|
Mongo the Meet Coordinator
Join Date: May 2008
Posts: 16,896
|
Thats not to bad of a price, welding is required though right?
__________________
Quote:
Originally Posted by KirkEvil
repo bigals turd gen and part it out to a loving home
|
|
|
|
05-19-2009, 11:32 AM
|
#20
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
yeah you weld the plate into the body. definitely something i am looking into though. you need the adjustability on all 4 corners if you really want to dial it in. and with rear coilovers, you can stick an airbag where the stock spring goes on the right side for help with the launch. that or a drag sway bar.
|
|
|
05-19-2009, 11:42 AM
|
#21
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
race car stuff right there
|
|
|
05-19-2009, 12:32 PM
|
#22
|
Meet Coordinator
Join Date: Jan 2008
Location: brick/pt. pleasant beach
Posts: 19,341
|
i like to think i own one
|
|
|
05-19-2009, 04:00 PM
|
#23
|
Co-Founder / Site Admin
Join Date: Jul 2004
Location: Ewing, NJ
Posts: 22,473
|
Quote:
Originally Posted by MIKES NOTCH
too bad they dont make lakewood struts and shocks for these cars.
|
The 3rd gen rear shocks will bolt right in on any 4th gen, not sure how close the valving would be though.
- Justin
__________________
1999 Camry - Beigemobile DD
2002 Suburban - Wife's DD
2004 Grand Cherokee - Not running / Project / Selling?
|
|
|
05-19-2009, 09:42 PM
|
#24
|
Join Date: Apr 2009
Location: MILLVILLE NJ
Posts: 84
|
ill prob stick with the stockers.. different struts, shocks, no front sway bar
|
|
|
05-19-2009, 10:23 PM
|
#25
|
11 Second Club
Join Date: Feb 2008
Location: Edison, NJ
Posts: 4,619
|
i too am looking for these answers....
what will get the front wheels to pull off the ground...?
__________________
1999 Z28 Convertible. 6 speed swap, wide cowl hood, full hockey stripes, and a whining 10 bolt.
2008 Sierra Vortec Max. 6.2 swapped, headers, Magnaflow catback, GMPP CAI, NHT optioned tow package.
2006 GTO, 11.48 @ 118.3
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|