NJFBOA - Home of New Jersey's Camaros and Firebirds
Page 3 of 3 12 3
Show 25 post(s) from this thread on one page

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Lounge (http://www.njfboa.org/forums/forumdisplay.php?f=26)
-   -   Winter mods? (http://www.njfboa.org/forums/showthread.php?t=54647)

Blacdout96 01-26-2011 03:23 PM
Brain, did you drop the opti system, and put the coil on plug setup?

LTb1ow 01-26-2011 03:25 PM
EFI connection setup.

Blackbirdws6 01-26-2011 04:04 PM
Quote:
Originally Posted by Blacdout96 (Post 748334)
Brain, did you drop the opti system, and put the coil on plug setup?
Opti is completely gone. As Matt mentioned, the car will use the EFI Connection 24x system with their custom harness, new LS2 coils/brackets and LS1 PCM.

LTb1ow 01-26-2011 04:06 PM
Quote:
Originally Posted by Blackbirdws6 (Post 748341)
Opti is completely gone. As Matt mentioned, the car will use the EFI Connection 24x system with their custom harness, new LS2 coils/brackets and LS1 PCM.
So, basically, its gonna be slow. :lol:

Blackbirdws6 01-26-2011 04:11 PM
Quote:
Originally Posted by LTs1ow (Post 748342)
So, basically, its gonna be slow. :lol:
Or won't start like some other LS1 wiring systems :)

LTb1ow 01-26-2011 04:12 PM
Quote:
Originally Posted by Blackbirdws6 (Post 748346)
Or won't start like some other LS1 wiring systems :)
Ohhh burrrnnnnnnnn :rofl::rofl:

creeper 01-26-2011 04:29 PM
Diamond Stage 2 clutch:
http://i55.tinypic.com/15gbhoj.jpg
http://i52.tinypic.com/2qn62he.jpg

it wasn't a planned mod. old clutch failed catastrophically so I figured since the trans was coming out anyway I'd upgrade it. and yes that's the automatic plug still dangling there hahah.

BonzoHansen 01-26-2011 04:37 PM
Quote:
Originally Posted by Blackbirdws6 (Post 748346)
Or won't start like some other LS1 wiring systems :)
well played

sweetbmxrider 01-26-2011 06:38 PM
Quote:
Originally Posted by coolmanvette75 (Post 748330)
well i discovered today that i need a new radiator :(

gonna throw in a 160 t-stat while i have everything out of there.
I wouldn't, heat is gunna suck. Save it for spring and take it out in the fall. If you do stick it in, you should have your fan turn on temps adjusted as well.

coolmanvette75 01-26-2011 08:10 PM
Quote:
Originally Posted by sweetbmxrider (Post 748374)
I wouldn't, heat is gunna suck. Save it for spring and take it out in the fall. If you do stick it in, you should have your fan turn on temps adjusted as well.
im not worried about the heat. it isnt that good to begin with. and after todays traveling nightmare, i doubt the car will be seeing much action till the spring. im going to re adjust the fan temps too. do you know if i can do that with the hypertech?

Anti_Rice_Guy 01-26-2011 10:11 PM
Quote:
Originally Posted by coolmanvette75 (Post 748387)
do you know if i can do that with the hypertech?
Yes

maroman88 01-27-2011 01:51 AM
your heat sucks cuz ur heater core needs to be flushed... hada do it both winters i had my 95z for

WildBillyT 01-27-2011 10:23 AM
Quote:
Originally Posted by coolmanvette75 (Post 748387)
im not worried about the heat. it isnt that good to begin with. and after todays traveling nightmare, i doubt the car will be seeing much action till the spring. im going to re adjust the fan temps too. do you know if i can do that with the hypertech?
If the heat sucks, so does the defroster. I have a drilled 180 in my GTP and it takes a little bit to get warm.

amargari 01-27-2011 07:43 PM
Installing TPI on my engine.

Stupercharged 01-27-2011 08:43 PM
So far this winter I've been spend money on parts for my 94 to do and LSX conversion so far i have a modified room and good news is i get my ls1 engine back soon....

98tadriver 01-28-2011 12:00 AM
Quote:
Originally Posted by sweetbmxrider (Post 748374)
I wouldn't, heat is gunna suck. Save it for spring and take it out in the fall. If you do stick it in, you should have your fan turn on temps adjusted as well.
I put a 160 stat in the vette. my heat is still plenty hot.


Since the 11.41@118.98mph 1.60 60' pass with stock 2.73 gears and mods in sig, i made a few changes


Z06 differential with 3.42 gears

FAST 90mm intake and 90mm TB

Haltech air bridge

ASP 25% UD damper (currently being shipped to my house)

donnj 01-29-2011 06:27 PM
Hows everyones winter projects going?
 
Just wondering if others are having trouble getting things done on their cars this winter with all the snow. Winters about half over and things are going slow on the progress side.

LTb1ow 01-29-2011 06:30 PM
Installed a few guages, and swapped a wheel stud.

crainholio 01-29-2011 08:55 PM
Quote:
Originally Posted by donnj (Post 748753)
Winters about half over
That's the best news all day!

WiMiMc 01-29-2011 09:03 PM
fix the O2 sensors.

might get a blazer so i can divert any itch to mod towards that.

sweetbmxrider 01-30-2011 11:47 AM
Quote:
Originally Posted by donnj (Post 748753)
Just wondering if others are having trouble getting things done on their cars this winter with all the snow. Winters about half over and things are going slow on the progress side.
I keep stacking boxes up. Progress?

Blackbirdws6 01-30-2011 12:52 PM
Quote:
Originally Posted by sweetbmxrider (Post 748826)
I keep stacking boxes up. Progress?
I stacked boxes for 6+ months so I would call that progress.


All times are GMT -5. The time now is 11:41 PM.
Page 3 of 3 12 3
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.