TH400 Sprag vs Roller Clutch?!
I started taking apart a TH400 recently to replace the valve body and roller clutch/sprag assembly. Didn't actually know if the trans was a roller or sprag drum until I got it apart cause the tag was painted over.
Anyway, I have a roller clutch/drum setup and want to convert to a sprag/drum setup; is Part #K7SD from http://400raptor.com/#Performance%20Parts the correct thing? Description from site: 34 element intermediate sprag and drum kit The TH400 34 element PATC sprag replaces the stock 16 element unit, increasing the torque capacity by 110%. Or how about this one? http://transmissiontechnologies.com/...ent-sprag.aspx or am I wasting my time and the roller clutch/drum setup is fine behind a 500ish crank horse motor with an extra 150 shot , 3,500ish stall and a trans brake? |
Can't help you with that question but this is where I've gotten automatic parts from in the past and they were pretty good:
http://www.bulkpart.com/Merchant2/me..._Code=3L80-400 |
Awesome. That works out great. They have the sprag style drum used in good conidition for under $100.
|
All times are GMT -5. The time now is 11:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.