NJFBOA - Home of New Jersey's Camaros and Firebirds
Page 15 of 16 « First 511121314 15 16
Show 25 post(s) from this thread on one page

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   The Later Years 93-present (http://www.njfboa.org/forums/forumdisplay.php?f=80)
-   -   The Unicorn: Abandon all Hope (http://www.njfboa.org/forums/showthread.php?t=65958)

townsend 01-24-2024 04:10 PM
Quote:
Originally Posted by LTb1ow (Post 958355)
What was remaining of the factory interior harness was a nightmare to troubleshoot. I lost brake switch signal and had to bypass a fix in cause the factory circuit was haywire. The hazard circuit also did not function, and previously my younger/dumber self removed the lock module so that function was not working either.

Removing all the hacked stuff and replacing with new wire, and simplified circuits should clean that up. Hopefully allow for easier diagnosing in the future.
Just let me know when the maiden voyage is so i can have the trailer ready.....again... :bertstare:

BonzoHansen 01-24-2024 05:13 PM
Quote:
Originally Posted by townsend (Post 958357)
Just let me know when the maiden voyage is so i can have the trailer ready.....again... :bertstare:
ouch.

LTb1ow 01-31-2024 05:17 PM
Quote:
Originally Posted by townsend (Post 958357)
Just let me know when the maiden voyage is so i can have the trailer ready.....again... :bertstare:
This side of wiring is completely isolated from engine/trans control.

Blackbirdws6 02-01-2024 03:04 PM
Quote:
Originally Posted by townsend (Post 958357)
Just let me know when the maiden voyage is so i can have the trailer ready.....again... :bertstare:
Quote:
Originally Posted by LTb1ow (Post 958367)
This side of wiring is completely isolated from engine/trans control.
Let's focus on productive things like me getting back my engine support ;)

townsend 02-12-2024 12:20 PM
Quote:
Originally Posted by Blackbirdws6 (Post 958368)
Let's focus on productive things like me getting back my engine support ;)
lack of showing mercy has it sir, returned to him a while back. thank you again lol

Blackbirdws6 02-12-2024 10:57 PM
Quote:
Originally Posted by townsend (Post 958369)
lack of showing mercy has it sir, returned to him a while back. thank you again lol
Convenient that I saw him this weekend with no support in sight lol. You're very welcome btw

townsend 02-21-2024 10:21 AM
Quote:
Originally Posted by Blackbirdws6 (Post 958370)
Convenient that I saw him this weekend with no support in sight lol. You're very welcome btw
its buried in that garage of his somewhere lmao

Blackbirdws6 02-21-2024 11:58 AM
Quote:
Originally Posted by townsend (Post 958376)
its buried in that garage of his somewhere lmao
There are many things buried in that garage. Especially hopes and dreams.

LTb1ow 02-24-2024 05:38 PM
New fuse panel
https://i.imgur.com/i6AlTLgl.jpg

Some front bumper work
http://i.imgur.com/0rhcPXIl.jpg

https://i.imgur.com/tmXRVlhl.jpg

Rear area
https://i.imgur.com/2CIksZrl.jpg

https://i.imgur.com/yFOM85jl.jpg

Under dash
https://i.imgur.com/GS5H9Vfl.jpg

https://i.imgur.com/z7F6csfl.jpg

Getting there
https://i.imgur.com/o4xYTU8l.jpg

As of now, power windows, power locks, power side mirrors, turn signals, brake signal, hazards all work. Still need to wire in the headlight switch for headlights and interior lights. Lots of clean up still needed but slowly chipping away.

Blackbirdws6 02-27-2024 05:33 AM
Coming along well. I like the connectors.

LTb1ow 03-26-2024 06:37 PM
Hour a day, or something.

Since the "racecar" push button start panel is no longer needed, replaced it with this creation. USB ports are for holley and radio. 8-)

https://i.imgur.com/weugzJwl.jpg

DT connector, EVERYTHING. :lol:
https://i.imgur.com/xYHhxVll.jpg

Yes, I know I drilled one extra hole.

Blackbirdws6 03-26-2024 06:55 PM
OCD triggered...... why different USB ports, why second from the left seems higher than others

LTb1ow 03-26-2024 06:56 PM
Quote:
Originally Posted by Blackbirdws6 (Post 958428)
OCD triggered...... why different USB ports, why second from the left seems higher than others
Radio out is a female USB, Holley out is a male USB so the backs of the ports are different. I will align them better massa

Blackbirdws6 03-26-2024 07:31 PM
Quote:
Originally Posted by LTb1ow (Post 958429)
Radio out is a female USB, Holley out is a male USB so the backs of the ports are different. I will align them better massa
It's 2024, please use the correct pronouns.

sweetbmxrider 03-27-2024 06:07 AM
Buy a male to female cable to plug between?

wretched73 03-27-2024 08:17 AM
Draw something up nicer in CAD and I'll 3d print it.

The_Bishop 04-04-2024 10:34 PM
Will probably have to print it in ASA or ABS for the heat stability. ASA would be better as it's UV resistant.

wretched73 04-05-2024 01:44 PM
Quote:
Originally Posted by The_Bishop (Post 958433)
Will probably have to print it in ASA or ABS for the heat stability. ASA would be better as it's UV resistant.
Heat stability? UV resistance?

My brother in christ, this car lives in a garage and is never driven. A piece of newspaper will hold up in this environment :rofl:

LTb1ow 04-06-2024 11:30 AM
https://external-content.duckduckgo....25c&ipo=images

townsend 04-11-2024 10:31 AM
Quote:
Originally Posted by wretched73 (Post 958434)
Heat stability? UV resistance?

My brother in christ, this car lives in a garage and is never driven. A piece of newspaper will hold up in this environment :rofl:

I can vouch for it being driven, since i had to pick it up that one time lmao

LTb1ow 04-13-2024 08:15 PM
Close to 45 miles driven today :nick:

LTb1ow 04-14-2024 05:36 PM
Redid the scavenge drain line from up and over the intake to just down straight into pan

https://i.imgur.com/m1Bw470l.jpg

Finished up sound deadening over the rear axle area
https://i.imgur.com/sdyLGNMl.jpg

Random engine bay shot (although I did repalce the coolant pressure sensor)
https://i.imgur.com/vVjK4iRl.jpg


And of course, is it even an LT1 without these?
https://i.imgur.com/dPHYSMbl.jpg

Blackbirdws6 04-15-2024 05:26 AM
Why do you need an oil drain with a NA setup? Notice a difference with the sound deadening?

wretched73 04-15-2024 07:14 AM
I have a roll of MLV if you want to up your weight and sound deadening

LS1ow 04-18-2024 09:23 AM
the hell is the air compressor for


All times are GMT -5. The time now is 04:43 PM.
Page 15 of 16 « First 511121314 15 16
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.