NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Brake, Chassis and Suspension Tech (http://www.njfboa.org/forums/forumdisplay.php?f=28)
-   -   thirdgen fbody fuel lines (http://www.njfboa.org/forums/showthread.php?t=12126)

camaro2you 08-03-2005 06:52 PM

thirdgen fbody fuel lines
 
Does anyone know if any thirdgen ever had the lines run on the passenger side of the car instead of the drivers side?

And has anyone ever delt with inline tube? thanks

PDubs87Z28 08-03-2005 07:01 PM

don't take my word for it because i really don't know but if you had the 305 4bbl i know that the fuel pump is on the passenger side under the air pump. i know fuel line run into there....im guessing under the passenger side

Tru2Chevy 08-04-2005 09:32 AM

The fuel line should have run up the driver's side "frame rail" and then crossed over to the pass. side of the engine compartment to the mechanical pump if it was a carbed car.

I have dealt with inline tube, I recently bought a stainless stell brake line kit from them. Everything went well.

- Justin

camaro2you 08-05-2005 07:28 AM

Quote:

Originally Posted by Tru2Chevy
The fuel line should have run up the driver's side "frame rail" and then crossed over to the pass. side of the engine compartment to the mechanical pump if it was a carbed car.

I have dealt with inline tube, I recently bought a stainless stell brake line kit from them. Everything went well.

- Justin

thanks justin, that clears it up im gonna get them from inline.

Batman 08-05-2005 08:43 AM

As far as I know they were all driver side and inline tube is top notch, used their lines 3 times and never had a problem yet.

camaroracer1992 08-09-2005 09:24 PM

braided stainless lines is the way to go baby!!!

PDubs87Z28 08-09-2005 09:38 PM

Quote:

Originally Posted by Tru2Chevy
The fuel line should have run up the driver's side "frame rail" and then crossed over to the pass. side of the engine compartment to the mechanical pump if it was a carbed car.

I have dealt with inline tube, I recently bought a stainless stell brake line kit from them. Everything went well.

- Justin

was under there sunday....and justins right


All times are GMT -5. The time now is 11:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.