NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Electrical and Wiring (http://www.njfboa.org/forums/forumdisplay.php?f=33)
-   -   running on half a motor (http://www.njfboa.org/forums/showthread.php?t=13030)

JerzLT1 09-24-2005 02:20 PM

running on half a motor
 
i started up my firebird today and only half of the motor is firing it was only running on Cyls 1 3 5 and 7 (touched the header and it wasnt hot at all) the only thing ive done since last time i started it was removed the ac/heater fan... any ideas?

camaro2you 09-24-2005 05:47 PM

4bbl or tpi or tbi?

JerzLT1 09-24-2005 05:55 PM

tpi

camaro2you 09-24-2005 09:14 PM

hmm, dont know much bout them, my guess is something wrong with cap, coil, rotor, chip in dist. or something wrong with injectors, not shure on this one but is there any kind of relays or fueses for the fuel system?

The Fixer 09-24-2005 10:08 PM

There are two fuses for injector power; 1,3,5,7 are on one, and 2,4,6,8 are the other. Check 'em out and see if one is burnt. Also, take a long screwdriver or long socket extension and try to hear if the injectors are clicking while the motor is running.

JerzLT1 09-25-2005 04:21 PM

(/rant) not even worrying about it anymore... i looked for the fuses for the injectors and theyre not there which means the cluster **** that wired up my car didnt wire it right. theres cut wires everywhere and im assuming they tried to splice the 2 harnesses together and it didnt work out well. im done with the TPI or the computer controlled stuff all together for that matter. im taking my motor to D&F in Berlin and having a carbed 350 built with forged internals and getting a turbo 400 trans... so tired of computers and wiring.... (/rant)

thanx for the help anyway

V 09-25-2005 05:47 PM

i'll take whatevers left of the tpi setup of your hands, PM me or email me at smokingss@aol.com. i hated fuel injection but after i did the tpi swap into my monte, and dealt with all the research and junk, i love it.

Tru2Chevy 09-27-2005 01:05 PM

Quote:

Originally Posted by 86Formula
(/rant) not even worrying about it anymore... i looked for the fuses for the injectors and theyre not there which means the cluster **** that wired up my car didnt wire it right. theres cut wires everywhere and im assuming they tried to splice the 2 harnesses together and it didnt work out well. im done with the TPI or the computer controlled stuff all together for that matter. im taking my motor to D&F in Berlin and having a carbed 350 built with forged internals and getting a turbo 400 trans... so tired of computers and wiring.... (/rant)

thanx for the help anyway

Why don't you just get a correct TPI harness on Ebay and drop it in place where your hacked harness is?

- Justin

JerzLT1 09-27-2005 07:34 PM

i might do that for the mean time but after i get back from Basic and Tech school im getting a fully built motor from D&F with my $10,000 enlistment bonus 8)

j0n 09-27-2005 08:12 PM

what u planning on doing for a rear/trans?

JerzLT1 09-27-2005 08:15 PM

turbo 350 trans (suggestion from Tim) and probably a 12 bolt with 4.10s or 3.73s... havent decided yet

Ian 09-27-2005 09:30 PM

I used to have 8.5 inch ten bolt with 3:90's in my camaro. That car had a TH-350 too and it was very bearable around town and with short highway trips 8)


All times are GMT -5. The time now is 08:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.