will my loudmouth connect to the QTP ypipe without modification?
 

I have the loudmouth and am seriously considering QTP headers with their catted ORY pipe. Will the ORY mount up to the loudmouth without any or major modification?

wouldn't it all match up and jsut be able to either clamp or weld it in place ?

it should line up without too much adjustment..

You may just have to trim a little off the I-pipe from your loud-mouth. But yes it will connect without any problems. After you have your y-pipe together I would recommend you have someone weld it when its nice & tucked in.

Yeah QTP has a very long, Big Y-pipe. I really wasn't happy with mine. Loved the headers, hated the Y-pipe. You do have to cut down the I-pipe because it will be too long. My suggestion is get yourself a set of Kooks instead, they fit great and the Y-pipe tucks right up against the body. I can get you picks when I get home if you want.

i thought u were goin with slp's :moon: or did you read about how damn low they hang

Yeah I warned him about it & gave him a link to what headers are highly reguarded.

Damn n00bs

I have this setup and it didn't match up at all they had to cut and weld ****... kinda regret getting them now the y-pipe hangs way too low and bottoms out like its its job.... The headers are really good but the y-pipe kinds sucks bad if you have a lowered car you might want to return them because your going to have a lot of problems (i got 1 1/2 inch clearence on a stock ride height). The only good thing is it sounds like a absolute monster with both cutouts open :)