NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Electrical and Wiring (http://www.njfboa.org/forums/forumdisplay.php?f=33)

- - reverse (http://www.njfboa.org/forums/showthread.php?t=30294)

Slo86Bird

11-20-2007 10:26 PM

reverse

my reverse lights are not working correctly. when i put the car in reverse, the lights do not come on, if i push the shifter up a tiny bit they turn on. sometimes my car is in park and wont start till i push the shifter up a little once again.

is it the neutral safety switch or wat?

r0nin89

11-20-2007 10:34 PM

Ur not alone. Used to happen in my 88 maro.

Slo86Bird

11-20-2007 11:25 PM

howd u fix it?

BonzoHansen

11-21-2007 08:43 AM

I believe the NSS on the shifter can be adjusted.

Slo86Bird

11-21-2007 10:16 PM

any idea how?

DaSkinnyGuy

11-22-2007 10:22 PM

Quote:

Originally Posted by redneckpimpin351 (Post 397353)

any idea how?

get a really big hammer

bubba428

11-22-2007 10:26 PM

its a 3rd gen...its gonna have quirks lol. BUT if your really anal I believe you can adjust them not 100% sure how but once you pull the console you can figure it out easily I'm sure

Slo86Bird

11-22-2007 11:00 PM

not worth that much trouble.. lol

IROCdan330

11-23-2007 06:04 AM

there should be a little c-clip (iirc) holding the shifter knob on, pull it out, pull the shifter knob up and off. next remove the torx screws (i believe there is 8 ) from the shifter bezel and pull that off...there is a thing bolted to the shifter with what i think is 2 bolts, it is (iirc) about 2 in x 5 in and curved to follow the shifter unit. thats the NSS. has a 6 cable harness plugged into it. loosen the 2 bolts, adjust as necessary, tighten the bolts, and install everythign in reverse order.

All times are GMT -5. The time now is 08:52 AM.