NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Electrical and Wiring (http://www.njfboa.org/forums/forumdisplay.php?f=33)
-   -   ignition (http://www.njfboa.org/forums/showthread.php?t=31034)

Kid Racer 12-27-2007 08:16 PM

ignition
 
hey guys i have a 1991 rs camaro and i lost my key for it i switched it from a 305 tbi to a 350 carb..when i buy the ignition do i still need the 91 ignition or can i get the 87 ignition..i am asking be cause 91 has the chip in the key and the ignition has a wire on it and the 87 dont have the wire..if u go on the autozone site and look up the ignitions for an 87 and 91 u will see what i am talking about can any one help me...

maroman88 12-27-2007 08:45 PM

depends on what was removed when the carbed setup was installed, was the computer totaly ditched and what about the VATS?

Kid Racer 12-27-2007 08:52 PM

isnt the vats in the key...

Fast92RS 12-27-2007 09:47 PM

Quote:

Originally Posted by Kid Racer (Post 406455)
isnt the vats in the key...

Yes and no. There are three items to a vats system. The chip or resistor in the key, the vats module and the prom in the ecu. The key sends a singnal to the vats module, if its the right key then the vats module sends a signal to the ecu to allow the car to start. If all that is removed then you can get a new ignition key cylinder and key for a non vats car and install it in exsisting column or just swap out the entire column, buts if you want to get rid of the air bag as well.


All times are GMT -5. The time now is 06:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.