data connector....
 

ok, so my car was originally a 305 4bbl carb (lg4 i believe), I am in the process of converting it to tpi because i am sick of after market carbs but anyways. my question is do i have to change the data connector and wires in my car to one that was used in a tpi car?

if so, does anyone have one? :wink:

As far as I know you'll need the entire harness out of a TPI car, which includes the ALDL port.

ok... i know i dont have the aldl connector in my harness that i got from the parts car and that car is long gone. I had to get all the tpi and wiring out in one night...

so does anyone have one?

You should go through your harness and see what else is missing.

aldl is part of the dash harness

ill explain which harnesses will work and which wont and all what you need... at a later time... i gotta go shoot my m249 now.

the tpi computer and engine harness is complete. I just dont have anything that would connect it to the dash except the one square white connecter.

i really hope this isnt going to be more of a pita than its worth....