NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Electrical and Wiring (http://www.njfboa.org/forums/forumdisplay.php?f=33)
-   -   headlight bulb? (http://www.njfboa.org/forums/showthread.php?t=41552)

BigRed 02-18-2009 12:27 PM

headlight bulb?
 
i know its probably simple, but one of my headlight bulbs blew and i cant figure out how to get to the bulb? am i just retarded?

BigRed 02-18-2009 12:31 PM

ok so ive searched around for a couple mins, and it looks like i have to get a whole new like square lamp correct? so how do you get the old one off? this is for the low beams if that makes a difference

Knipps 02-18-2009 01:43 PM

#1 question. WHAT CAR DO YOU DRIVE?

BigRed 02-18-2009 04:28 PM

lol my bad, 94 z28

madness410 02-18-2009 04:55 PM

Quote:

Originally Posted by Knipps (Post 548490)
#1 question. WHAT CAR DO YOU DRIVE?

he can drive a different car but the bulb can be out on a different car...so the REAL question #1 is: what car did the bulb blow out on? :P

BigRed 02-18-2009 04:56 PM

the car that that bulb is out on is the 94 z

sweetbmxrider 02-18-2009 04:56 PM

its called a sealed beam. bulbs don't come out. make sure you get either the low beam, the outside, or the high beam, the inside.

maroman88 02-19-2009 12:26 AM

theres 2 small torque star type screws

BigRed 02-19-2009 04:32 PM

i unscrewed the two small torque screws but it was still hooked on from the other side and i couldnt see what was holding it, but when i get to putting in the new light ill have to check it out again, napa gave me the wrong light, theyre god damn idiots in there and i didnt think to check it before i left


All times are GMT -5. The time now is 10:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.