Need Small Block 350 Intake, Carb & Distributor!
 

:twisted:Tried using the throttle body and intake from my original 305 that threw a rod and im encoutering too many problems on my rebuilt 350 and I wan't to drive already! So if anyone has a intake, carb. and distributor for a carb (one wire hookup) for a reasonable price please contact this thread. Will buy immidiately!!! CASH!!! So much work done to car and she roars with the setup now but just too many little issues one after another. Going Old School!!!

I have an 8004 Wieand action plus manifold. $50 in 08869

what year 350 block you have i have a holley carb and a few rochester carbs

i have a holley intake that i took off my 80 camaro 80

Not familiar with the wieand manifold but what rpm range is that made to benefit? I'm also running the stock hood for now. What condition is the manifold in? Thanks

idle - 5500/6000. It is used but has no cracks or stripped bolt holes. It has been media blasted to clean it up.

What condition is the holley intake and carb in? Definitely interested. What rpm range is that manifold made to benefit? If all is well let me know and this weekend (saturday) I would pick it up.

The 350 is out of a 73" Chevelle Rebuilt by the way guys.

the carb may need to be rebuilt i know it needs a fuel line the intake is about 2,000 and up power range im guessing

If you post up the model name or part number of that Holley we can get the RPM range for you, Chris. If it's a 300-36 high rise the RPM range is 1500-7000. A 300-38 is idle-5500.

I have a Holley Street Dominator 300-36 intake and a Holley 750 DP 4150 series carb. The stamping on the carb is 4779-7 and I'm not sure of other specs on it. The intake is in good shape, had it on my 383 for a few months. The carb was only run on the engine for a few weeks, I would replace the power valve if I were going to use it again tho.

Stevoone Where are you located?

Delanco/Burlington City

the holley i have is a few years old it was used on my 80 camaro motor

pm me your phone number so i can send you a pic of the intake

my buddy scott has a msd probillet distributor, nothin wrong with it, just pulled it out when he sold the car/motor.if interested, he wants $100 for it, i beleive new like $275.
pm me and i'll give you his #

i have a gm cast intake no egr and a quadrajet carb (needs rebuild)
its yours if you come get it

holly street dominator intake + 670 holley street avenger carb for 175.

Where are you Emolineaux?

im down 15 20 mins south of hamilton