NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Electrical and Wiring (http://www.njfboa.org/forums/forumdisplay.php?f=33)
-   -   HID Question (http://www.njfboa.org/forums/showthread.php?t=48282)

MyFirstZ 11-24-2009 12:37 PM

HID Question
 
Alright let me clear up what i have been through. I had originally two 9005 bulbs, two 9005 ballist, and two cords inbetween the original wiring harness and balist. After my accident one of them was not working. Bought a new bulb still did not work. So now what i have accumulated is this . . .

4 - wiring harness (between balist and original wiring)
4 - bubls (including original)
3 - ballist ( should be a forth but i can find it)

All but one bulb works because of a cut wire.

All balist work

Only one wiring works with the balist connected to them. If i hook up just a regular 9005 halogen bulb they all work.

Forgot to mention, fuses are good, i tried it with the engine running and off.

http://s44.photobucket.com/albums/f3...o/PB130071.jpg

http://s44.photobucket.com/albums/f3...o/PB130070.jpg

http://s44.photobucket.com/albums/f3...o/PB130069.jpg

I checked continuity through all the wiring harness and they all worked i guess next check is resistence but i am not sure what number to look for.

Anyone have any ideas on what to try so i dont have to buy anything else ? Or does anyone have that wire that i am talknig about that they know works.

V 11-24-2009 12:53 PM

try this quick, on the wires that dont work, put 2 jumper wires so you can switch the voltage. like how they hook up with a direct plug in, try putting it so tan(stock headlight wiring) goes to black(hid ground) and red(hid wiring) to black(stock headlight wiring).


edit, yea after looking as close as possible at the pic, it does seem the 3 "bad" wires have the terminals switched. a regular 9005 halogen bulb does not care which terminal is which but the HID ballasts are very specific. many aftermarket HID kits mess that up. Was that issue on my friends charger when i installed some.

MyFirstZ 11-24-2009 01:14 PM

yeah i just figured that out i was outside testing them agian freaking bull crap. Thanks for the reply though. Well least i got one spare bulb, balist and two wires

Tru2Chevy 11-24-2009 05:59 PM

Are you running those HID bulbs in stock housings?

- Justin

sweetbmxrider 11-24-2009 10:16 PM

ahhh yes i was just going to say the wires are switched but you guys got it. isn't that so retarded. i think mine were switched too.

MyFirstZ 11-25-2009 06:01 AM

yes it is retarded and frustrating, but **** happens works now im happy 8]


All times are GMT -5. The time now is 01:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.