|
well to start off, all my bars in the rear were made by Leo Barnaby from Neverlift Motorsports, along with the Torque Arm, my rear is square,my rear shocks were new this year, there not bent or broken, i have a 28' enclosed trailer,since there is very little places to tie down the front, there are two brackets with holes in them by both sides of the radiator, the rear is tied around the housing, but if i were to tie the front and back down by using the frame with no suspension movement, i would either wreck the floor of the trailer or my car, i'd rather by new shocks. my car is about at stock ride height. another thing to look at is that i'm using iron heads with a Dart Little "M" Block. the front suspension seems to be working fine the weight is being transfered, maybe its something i'm not looking at. i'm getting my new shochs this week, i'll be testing on sunday. Thanks Again.
|