NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Tru2Chevy · 12-18-2005, 10:12 AM

Alex, if you are planning on running hood pins (either just in front, or on all four corners) you don't have to buy the bolt-on hood. Harwood makes rear-hinge and lift-off hoods for thirdgens, so I would assume that they do the same for fourth gens. Personally I would get a rear-hinged hood, that way you can use your stock rear hinges, and pins in the front, and you don't have to worry about the added cost and weight of the hood that is built for a stock latch.

- Justin

12-18-2005, 10:12 AM	#14
Tru2Chevy Co-Founder / Site Admin Join Date: Jul 2004 Location: Ewing, NJ Posts: 22,476 iTrader: (8) Social Networks:	Alex, if you are planning on running hood pins (either just in front, or on all four corners) you don't have to buy the bolt-on hood. Harwood makes rear-hinge and lift-off hoods for thirdgens, so I would assume that they do the same for fourth gens. Personally I would get a rear-hinged hood, that way you can use your stock rear hinges, and pins in the front, and you don't have to worry about the added cost and weight of the hood that is built for a stock latch. - Justin __________________ 1999 Camry - Beigemobile DD 2002 Suburban - Wife's DD 2004 Grand Cherokee - Not running / Project / Selling?