NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

BMF · 05-10-2006, 07:32 PM

Pete Z (appletree) should have a real spring recommendation.

I can pick out a Moroso spring for your car, however i need the front end weight. One of my good friends has had alot of success with 6 cylinder springs.

i'd use the system i layed out, with the global west bushings, roller bearing lowers, and Pete Z rear suspension.

The rear suspension is going to be key to making the car work.

they're bolt on shocks, so any control arms build around the use of stock style shocks, should be fine. However my experience is with the stock control arms.

05-10-2006, 07:32 PM	#17
BMF Join Date: Jan 2006 Location: Hamilton SQ Posts: 103 iTrader: (0)	Pete Z (appletree) should have a real spring recommendation. I can pick out a Moroso spring for your car, however i need the front end weight. One of my good friends has had alot of success with 6 cylinder springs. i'd use the system i layed out, with the global west bushings, roller bearing lowers, and Pete Z rear suspension. The rear suspension is going to be key to making the car work. they're bolt on shocks, so any control arms build around the use of stock style shocks, should be fine. However my experience is with the stock control arms. __________________ Brian's Camaro build up BSE Power 385" Best ET 1/4 11.15 @ 117.42 Best ET 1/8 7.01 @ 95.94 Best 60ft 1.46 Launch Picture Last edited by BMF; 05-10-2006 at 07:40 PM.