Quote:
Originally Posted by SmokingSS
take a better shot of the blue wire coming out of the HID box. that should be power in. the red encased wire looks to go to the hid bulb itself. that random connector should plug into the blue encased wire, and then the metal prong on the end hook up to the factory headlight harness/headlight connector. i know on some kits that wire(your blue encased one) plugs right into the stock headlight connector BUT thats not the right way. when you do that, to polarities are switched. use that small adapter harness and make sure red-red and black-black, or at least that its opposite from when the harness isnt used and the blue wire is diretcly plugged into the stock headlight connector
|
Ok so blue is power in then what do i plug into it? The stock clip for the regular bulb?? Then the stock clip for the high beam clips into the other side attached to the light. And as far as the little clip with the 2 small prongs on the end where do they clip to?? I am so confused and frustrated!! Plug and play and I still cant figure it out
[IMG]

[/IMG]