NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Pampered-Z · 08-01-2007, 12:24 PM

Tire pressure, and how hot were getting the tires, and I would also play with the pinion angle. On the Nitto DRs my car hooked best at -4. Just as places to start.

Also where did you set the QAs on? Setting up the shocks can be a real probelm as well. If you set the front up too soft it can unload the rear tires once off the initial launch. Make sure your verify your spinning right off the hit and not when the whole car moves.

08-01-2007, 12:24 PM	#15
Pampered-Z Sliderule / Moderator Join Date: Oct 2004 Location: Catawissa PA Posts: 2,294 iTrader: (1)	Tire pressure, and how hot were getting the tires, and I would also play with the pinion angle. On the Nitto DRs my car hooked best at -4. Just as places to start. Also where did you set the QAs on? Setting up the shocks can be a real probelm as well. If you set the front up too soft it can unload the rear tires once off the initial launch. Make sure your verify your spinning right off the hit and not when the whole car moves. __________________ 93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada 1) Build it 2) Race it 3) Break it 4) Repeat!!!