Do it right and be legal. IF tech pops your hood and no bat they are immidiately going to look for cut off switch, the wiring etc.
You don't any wires near moving parts (drive shaft), you can run them along the pinch welds/floorpan and tuck them up pretty high. But the majority that I've see do run them inside the car.
I relocated the power distribution block down next to the battery - in front of the radiator overflow tube, and ran all the wires above the wheelwell and below the inner fender, so there are no wires showing under the hood. I'll post pics this weekend. I started a tech artical but never finished it!
The thread below has good info on the bat relocation ( from the drag racing section ).
http://www.njfboa.org/forums/showthread.php?t=45149
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
Last edited by Pampered-Z; 10-13-2009 at 08:50 AM.
|