NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

woodchip525 · 01-31-2010, 07:56 PM

i took the lower hinge off, filled the hole with weld.drilled a new hole, put new bushings and pin in. took most of the sag out but the upper hinge is sloppy

01-31-2010, 07:56 PM	#5
woodchip525 Join Date: Sep 2009 Location: Woodbury Posts: 12 iTrader: (0)	i took the lower hinge off, filled the hole with weld.drilled a new hole, put new bushings and pin in. took most of the sag out but the upper hinge is sloppy Last edited by woodchip525; 01-31-2010 at 07:56 PM.